Search found 49 matches
- Sun May 12, 2024 10:42 pm
- Forum: Dev: Software
- Topic: Realdash xml description file for the Rusefi CAN Verbose protocol
- Replies: 0
- Views: 778
Realdash xml description file for the Rusefi CAN Verbose protocol
I found a script for py that automatically converts the can-DBC database files to a description file for RealDash and successfully converted it. https://github.com/wjcloudy/DBCtoRDXML Perhaps someone will be interested in implementing a dashboard or individual sensors on Realdash Xml file rusefi.dbc...
- Wed Apr 24, 2024 11:05 am
- Forum: Dev: Hardware
- Topic: Subaru EZ30 Cam hall sensor strange behavior
- Replies: 7
- Views: 8815
Re: Subaru EZ30 Cam hall sensor strange behavior
Thank you ;) I plan to swap XT with a legacy EZ30 engine and a drivetrain with a diesel gearbox. So I definitely need some help when I start this project ;) Good afternoon, why do you need a diesel gearbox? Subaru has a very large selection of 5-speed gearboxes, for example ty752vbaaa or ty754vbbba...
- Thu Mar 28, 2024 7:20 pm
- Forum: Dev: Hardware
- Topic: Subaru EZ30 Cam hall sensor strange behavior
- Replies: 7
- Views: 8815
Re: Subaru EZ30 Cam hall sensor strange behavior
And about my car and engine https://www.rusefi.com/forum/viewtopic.php?f=2&t=2608
- Thu Mar 28, 2024 7:18 pm
- Forum: Dev: Hardware
- Topic: Subaru EZ30 Cam hall sensor strange behavior
- Replies: 7
- Views: 8815
Re: Subaru EZ30 Cam hall sensor strange behavior
Hello, we had problems with vvti but Andrey defeated them all, thank him very much. Now the car has already driven more than 20k km, there are no problems with VVTI, the only problem is the camshaft sensor. The sensors have strange behavior which is called lazy hall on the forum. The sensor inverts ...
- Sun Dec 03, 2023 7:39 pm
- Forum: Dev: Software
- Topic: After start enrichment table questions
- Replies: 5
- Views: 9488
Re: After start enrichment table questions
Finally, I found time after the surgery and before work to check and try to adjust this part, and I think I did just fine. I smoothly transition from enrichment to idle card and have no problems. AFTERSTART.png I recorded a youtube video. https://youtu.be/FJneumhkFJk Thank you very much, it works pe...
- Wed Nov 01, 2023 2:37 pm
- Forum: Dev: Software
- Topic: After start enrichment table questions
- Replies: 5
- Views: 9488
After start enrichment table questions
I have questions about the enrichment table after the start. The default table is 0. If you change it to another number, then 0 can no longer be set, 1 is set. 1 means no enrichment There are 0 seconds in line x, which means immediately after the Cranking limit is overcome? In the table, the indicat...
- Wed Nov 01, 2023 1:19 pm
- Forum: Dev: Software
- Topic: Broken software knock proteus f4 (last snapshot )
- Replies: 3
- Views: 6245
Re: Broken software knock proteus f4 (last snapshot )
Today I started looking for the snapshot in which the error appeared. I downloaded a snapshot from 01.11 and everything works in it. I apologize, the topic can be closed.
Log here https://rusefi.com/online/view.php?log=1316
Log here https://rusefi.com/online/view.php?log=1316
- Tue Oct 31, 2023 11:23 am
- Forum: Dev: Software
- Topic: Broken software knock proteus f4 (last snapshot )
- Replies: 3
- Views: 6245
Broken software knock proteus f4 (last snapshot )
In the last snapshot, there were changes that I would like to see in me. But for some reason, the knocking doesn't work. in all channels level knock100dB
Logs is https://rusefi.com/online/view.php?log=1314
Logs is https://rusefi.com/online/view.php?log=1314
- Mon Oct 30, 2023 10:12 am
- Forum: Dev: Hardware
- Topic: Proteus no Logging sd card
- Replies: 1
- Views: 4938
Re: Proteus no Logging sd card
the problem is solved, the problem was in the NTFS file system. After reformatting the card to FAT32, the problem was solved. now Proteus keeps logs on SD CARD
- Fri Oct 27, 2023 4:40 pm
- Forum: Dev: Hardware
- Topic: Proteus no Logging sd card
- Replies: 1
- Views: 4938
Proteus no Logging sd card
The problem is that there are no logs on the card. Despite the fact that I can physically see the card when I first connect it via USB. I created a log with a DEBUG SD Card and I don't see the logging file entries SD card debug.png Tune https://www.rusefi.com/online/view.php?msq=1564 Logs https://ww...
- Fri Oct 27, 2023 4:04 pm
- Forum: Dev: Software
- Topic: No accel enrichment
- Replies: 1
- Views: 4140
Re: No accel enrichment
Sorry for bothering an already busy person. The wrong fuel enrichment threshold was not giving me fuel when accelerating. Everything is fine now old value accel threshold -40 New value accel threshold- 6 accel thres.png Still not perfect, but there are already successes and the ratio of fuel to air ...
- Fri Oct 27, 2023 3:50 pm
- Forum: Dev: Software
- Topic: No accel enrichment
- Replies: 1
- Views: 4140
No accel enrichment
hi ,
Problem with accel enrichment, although the settings seem to be correct and worked before
tune https://www.rusefi.com/online/view.php?msq=1564
Logs https://www.rusefi.com/online/view.php?log=1310
Problem with accel enrichment, although the settings seem to be correct and worked before
tune https://www.rusefi.com/online/view.php?msq=1564
Logs https://www.rusefi.com/online/view.php?log=1310
- Wed Oct 11, 2023 7:48 pm
- Forum: You and your build
- Topic: 2000 Subaru Outback bh Ez30 1Gen/2gen
- Replies: 2
- Views: 8998
Re: 2000 Subaru Outback bh Ez30 1Gen/2gen
A lot has been done since then. I want to post the progress here, Surely it will be useful to someone. Today I tested Andrew's fixes. https://rusefi.com/forum/viewtopic.php?f=4&p=48508#p48508 Added VVT angles targets based on safety objectives, angles are lowered from the standard by 5-10 degree...
- Wed Oct 11, 2023 7:38 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
Hello everyone, today I tested what Andrew fixed, for which I am very grateful to him. When setting up the Precision VVt after setting the values to 40, everything works up to 28 degrees, anything above again a loss of synchronization. Now I've set it to 60 and have a successful sync up to 38 degree...
- Sat Oct 07, 2023 2:47 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
Yay, those magic numbers helped me. Now I can set an angle greater than 10 and it is held. Now I have connected the wiring of the second solenoid VVT Right cylinder head and I do not see any changes, not seeing the PWM on this channel. If you swap the Exits on the solenoids, the PWM appears on the c...
- Fri Oct 06, 2023 4:22 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
Good time everyone! Norman, unfortunately I don’t know about the origin of this camshaft, but I have exactly this on my Subaru ez30. Now about the current state. At the moment, thanks to Dron_gus and Pavel, I managed to find out the duty cycle range and I worked a little with the PID regulator and f...
- Tue Oct 03, 2023 8:54 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
Today I bought a second such sensor and decided to try to control the VVT closed loop and I have a crash again. If I try to turn the camshaft at least 3 degrees, then the engine starts to shake and the VVT readings of this camshaft freeze (This can be seen in the graph, a straight line) javaw_ZXgxOQ...
- Mon Oct 02, 2023 1:08 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
So, since I have a camshaft sensor from mitsubishi, I began to look for similar ones in size and connectors. And I found. WhatsApp Image 2023-10-02 at 15.58.13.jpeg On the right is my native sensor, to the left of 4g18, 4g63 and it fits the pinout. Now about the my problem. This sensor does not have...
- Thu Sep 28, 2023 8:34 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
Is that it? will look the same as the previous log ?!
log is https://rusefi.com/online/view.php?log=1292
log is https://rusefi.com/online/view.php?log=1292
- Thu Sep 28, 2023 1:49 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
Okay , today I’ll make a log with the maximum value of readings per second and post it
- Thu Sep 28, 2023 9:57 am
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
- Thu Sep 28, 2023 9:55 am
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
We have "Maximum cam/VVT sync RPM(rpm)" setting since technically you do not need sync all the time What is the problem you are facing? Looks like you have no VVT so nothing negative is happening? https://rusefi.com/online/view.php?msq=1544&dialog=vvtPidDialog Hi Andrey, in this setti...
- Tue Sep 26, 2023 7:20 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
There is a problem, VVT syncnorization disappears after 1800 RPM. It seems to come from here https://rusefi.com/forum/viewtopic.php?f=4&t=2521&p=47394&hilit=lazy#p47394 javaw_xP6dXFZzcI.png Do not change the camshaft sensor to a simple hall sensor without this joke?! I don't fully unders...
- Wed Sep 13, 2023 3:04 pm
- Forum: User Support
- Topic: Subaru triggers.
- Replies: 55
- Views: 53722
Re: Subaru triggers.
Hello ! Some Subaru triggers are similar to the ez30 trigger. Modern fb16,20 motors have the same skip -2 and sector -2 -2 consecutive to each other, I think that with the EZ30 profile trigger errors will occur, but this is not certain. I advise you to try the 36-2-2-2 trigger, it is more universal ...
- Sun Sep 10, 2023 6:03 pm
- Forum: Dev: Hardware
- Topic: Missing knock signal for some cylinders on Proteus 0.7
- Replies: 4
- Views: 4821
- Sun Sep 10, 2023 4:13 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
So, we officially have a success on synchronization. I'll leave a link to the log here
https://rusefi.com/online/view.php?log=1285
Thank you Andrey , this is magic !!!
https://rusefi.com/online/view.php?log=1285
Thank you Andrey , this is magic !!!
- Sun Sep 10, 2023 2:05 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
I downloaded the last Snapshot and set the above values.and now I don't see the position of vvt1 vvt2
Here is the log
https://rusefi.com/online/view.php?log=1282
Here is the log
https://rusefi.com/online/view.php?log=1282
- Sun Sep 10, 2023 1:38 pm
- Forum: Dev: Hardware
- Topic: 2JZ 3/0 cam wheel problem
- Replies: 23
- Views: 18197
Re: 2JZ 3/0 cam wheel problem
So I set the settings that you suggested above, it seems I have camshaft synchronization? Do these magic numbers correct the positions of the cams? I want to know more about it))
Last logs is https://rusefi.com/online/view.php?log=1281
Last logs is https://rusefi.com/online/view.php?log=1281
- Sat Sep 09, 2023 10:53 pm
- Forum: Dev: Hardware
- Topic: Missing knock signal for some cylinders on Proteus 0.7
- Replies: 4
- Views: 4821
Re: Missing knock signal for some cylinders on Proteus 0.7
Now I have assembled an ardu-stim on the atmel and set a set of triggers 4-1 and 1 for the cam. Connected Crank and Cam and set up RE for 4-1 trigger and 1 cam signal and received individual ignition and all 6 cylinders received their signals. I understand this problem is somehow related to synchron...
- Sat Sep 09, 2023 9:58 pm
- Forum: Dev: Software
- Topic: Support for Subaru EZ30 trigger
- Replies: 27
- Views: 16821
Re: Support for Subaru EZ30 trigger
I just found a description of the simulation of the first and second generation EZ30 sensors from the well-known github page of the Crank\Cam signal simulator. But unfortunately, I don't understand much about this.? =)
https://github.com/speeduino/Ardu-Stim/pull/60
https://github.com/speeduino/Ardu-Stim/pull/60