generated_ts_name_by_pin.cpp

Go to the documentation of this file.

//DO NOT EDIT MANUALLY, let automation work hard.
 
// auto-generated by PinoutLogic.java based on config/boards/hellen/uaefi121/connectors/uaefi121.yaml
#include "pch.h"
 
// see comments at declaration in pin_repository.h
const char * getBoardSpecificPinName(brain_pin_e brainPin) {
    switch(brainPin) {
        case Gpio::A6: return "BUTTON2";
        case Gpio::A8: return "49a INJ_6";
        case Gpio::A9: return "45a INJ_2";
        case Gpio::B1: return "BUTTON1";
        case Gpio::B12: return "50a INJ_7";
        case Gpio::B8: return "Coil 6";
        case Gpio::B9: return "86a LS5_HOT";
        case Gpio::C13: return "Coil 1";
        case Gpio::C6: return "88a LS4";
        case Gpio::D0: return "44a INJ_1";
        case Gpio::D1: return "33a Digital input signal";
        case Gpio::D10: return "47a INJ_4";
        case Gpio::D11: return "46a INJ_3";
        case Gpio::D12: return "15a LS2";
        case Gpio::D13: return "16a LS3";
        case Gpio::D15: return "14a LS1";
        case Gpio::D2: return "48a INJ_5";
        case Gpio::D3: return "51a INJ_8";
        case Gpio::D7: return "43a High Side Output";
        case Gpio::E0: return "VR_DISCRETE+";
        case Gpio::E1: return "VR_9924+";
        case Gpio::E11: return "FLEX";
        case Gpio::E12: return "36a HALL1 / VSS";
        case Gpio::E13: return "35a HALL2";
        case Gpio::E14: return "34a HALL3";
        case Gpio::E15: return "BUTTON3";
        case Gpio::E2: return "Coil 5";
        case Gpio::E3: return "Coil 4";
        case Gpio::E4: return "Coil 3";
        case Gpio::E5: return "Coil 2";
        case Gpio::E6: return "87a LS6_HOT";
        default: return nullptr;
    }
    return nullptr;
}