61#define adc_channel_e_enum 0="NONE",27="10A - Aux Analog 5",18="11A - Aux Analog 3",16="12A - Aux Analog 8",9="19A - Aux Analog 6",10="1A - Aux Analog 1",32="20A - Aux Analog 9",6="24B - Ignition Key Voltage",14="27A - IAT Sensor Input",30="28A - Aux Temp 1",13="29A - CLT Sensor Input",11="2A - Aux Analog 4",29="30A - Aux Temp 2",5="31A - TPS Sensor Input",4="32A - PPS Sensor Input",21="33A - TPS2 Sensor Input",20="34A - PPS2 Sensor Input",2="3A - Aux Analog 2",25="4A - Aux Analog 7",3="On-board MAP"
62#define adc_channel_e_fullenum "NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24B - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","30A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
440#define DYNO_CAR_COEFF_OF_DRAG_TOOLTIP "Resistance of an car in air, for example see list of popular cars: https://ecomodder.com/wiki/Vehicle_Coefficient_of_Drag_List"
441#define DYNO_CAR_FRONTAL_AREA_TOOLTIP "The frontal area A represents the frontal projection of the car's area"
442#define DYNO_CAR_FRONTAL_AREA_UNITS "m2"
443#define DYNO_CAR_GEAR_FINAL_DRIVE_TOOLTIP "Final drive gear ratio"
447#define DYNO_CAR_GEAR_RATIO_TOOLTIP "Ratio of the gear on which the measurement will be carried out, usually the gear is selected whose ratio is closest to 1"