Andrey, looks like I can't hide! I still have a BMW 760 here waiting for an engine management solution (12cyl + direct injection), so I can swap the V12 into something cool. I'll most likely weld injector bungs in the intakes and run PFI.
Statistics: Posted by MadGoatCustoms — Wed Feb 15, 2023 9:28 pm
]]>
I'm looking at available options for trigger hardware, leaning towards an optical sensor due to the small space available. Can we decode this AEM cam wheel for Nissan? It looks like the Honda 1+24 pattern should work.
We do support this now - "12 tooth crank " plus "single tooth cam" will decode it, along with many similar patterns from honda/toyota.Statistics: Posted by mck1117 — Tue Feb 14, 2023 12:28 am
]]>
I'm just getting started converting a 91 Honda Acty (JDM mini truck) to EFI.
How did that go? I spy https://www.facebook.com/MadGoatCustoms/ 
Statistics: Posted by AndreyB — Tue Feb 14, 2023 12:27 am
]]>
I'm looking at available options for trigger hardware, leaning towards an optical sensor due to the small space available. Can we decode this AEM cam wheel for Nissan? It looks like the Honda 1+24 pattern should work.
There's a better option, this one is easier to decode, and we already fully support it: https://www.diyautotune.com/product/50-mm-optical-trigger-wheel-for-nissan-sr20det-or-ka24de/Statistics: Posted by mck1117 — Tue Mar 01, 2022 7:22 pm
]]>
]]>
Statistics: Posted by MadGoatCustoms — Tue Mar 01, 2022 2:00 pm
]]>
(that's just two URLs of same file)
Statistics: Posted by AndreyB — Sat Feb 26, 2022 10:36 pm
]]>
https://github.com/rusefi/hw_microRusEfi
https://github.com/rusefi/hw_microRusEfi/blob/master/readme.md
Statistics: Posted by MadGoatCustoms — Sat Feb 26, 2022 9:18 pm
]]>
If you do not need dual trigger let's not discuss it within "Honda Acty 660 3cyl E07A carb to EFI" topic.
Statistics: Posted by AndreyB — Sat Feb 26, 2022 7:32 pm
]]>
I don't have a need for dual triggers with this project, I'm just thinking about other engines that are not supported. Doesn't virtually every modern engine use at least two trigger wheels? If the engine isn't on the drop down list there's no way to set it up. Nearly every other ECU has an option to set up each trigger input individually.
Statistics: Posted by MadGoatCustoms — Sat Feb 26, 2022 7:29 pm
]]>
which raises the question of what info has confused @MadGoatCustoms and what should be adjust where
I received no feedback. That makes me think/hope that no issue with MRE and stepper. Statistics: Posted by Dron_Gus — Sat Feb 26, 2022 6:57 pm
]]>
Stepper is supported on MRE since https://rusefi.com/forum/viewtopic.php?f=2&t=2249 .
which raises the question of what info has confused @MadGoatCustoms and what should be adjust whereStatistics: Posted by AndreyB — Sat Feb 26, 2022 6:53 pm
]]>
MRE hardware might support stepper but firmware might not. overall I am not sure if anyone in rusEFI is using stepper. We kind of have the code but we have very little priority for stepper - for us it's either solenoid or full ETB.
Stepper is supported on MRE since https://rusefi.com/forum/viewtopic.php?f=2&t=2249 .Statistics: Posted by Dron_Gus — Sat Feb 26, 2022 6:51 pm
]]>
MRE hardware might support stepper but firmware might not. overall I am not sure if anyone in rusEFI is using stepper. We kind of have the code but we have very little priority for stepper - for us it's either solenoid or full ETB.
Statistics: Posted by AndreyB — Sat Feb 26, 2022 4:06 pm
]]>
]]>