Search found 51 matches

by Boostonabudget
Wed Jun 23, 2021 12:49 am
Forum: Tuning Support: Making it Run
Topic: Getting accel enrich to function
Replies: 2
Views: 3848

Re: Getting accel enrich to function

Sorry it took so long for a response, I was taking a bit of a break due to frustration. The reason that tune said 50 everywhere is because it actually made 0 change in fueling. Didn't matter if I had the whole table at 0 or 100 it made no change to the afrs or how the car behaved. Its now at all 0 a...
by Boostonabudget
Sun May 30, 2021 8:57 am
Forum: Tuning Support: Making it Run
Topic: Getting accel enrich to function
Replies: 2
Views: 3848

Getting accel enrich to function

thought id make a new post specific to ae just to aid in keeping things organized. i was informed to ignore the tps/tps table for ae and use wall wetting ect in the accel enrich page, not sure if i'm missing a setting ect but cant get any extra fueling or make any difference to the car going super l...
by Boostonabudget
Sun May 30, 2021 8:20 am
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Re: Vvt position error

made some decent progress finally, i have managed to get rid of the miss (new spark plugs and plug a vacuum leak) I've also manage to get it both starting and idleing very well. after fiddling with some trigger settings i managed to get vvt pos reading 10ish on the intake and 80-90ish on the exhaust...
by Boostonabudget
Sat May 29, 2021 3:23 pm
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Re: Vvt position error

yeah from the looks they have been scaled at least 2 decimal points so I've put in 0.65, 0.15 and 0.05 for intake and 0.55, 0.12 and 0.02 for exhaust. I am yet to figure out the specific duties at which minimum and maximum positions are achieved so ill test that tomorrow :) I did have a look at both...
by Boostonabudget
Sat May 29, 2021 9:55 am
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Re: Vvt position error

ive managed to find the pid settings for both intake and exhaust cams, can someone specify exactly what min max means in the pid section?
by Boostonabudget
Sat May 29, 2021 8:39 am
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Re: Vvt position error

thanks :) just glad im finally contributing. im still very unsure on how to set up vvt pid settings or how to adjust them but all in good time.
by Boostonabudget
Sat May 29, 2021 8:27 am
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Re: Vvt position error

as requsted here is the log with the latest fw build :) https://rusefi.com/online/view.php?log=243
by Boostonabudget
Fri May 28, 2021 3:27 am
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Re: Vvt position error

By bug I just was referring to what you said a while back when I asked why my vvt position gauge said like 800+ haha. Will flash the latest bundle tonight and report back :) Also rea both vvt working im unsure if there is an extra setting I have missed. I have both sensors set as barra ect so if I n...
by Boostonabudget
Thu May 27, 2021 6:12 am
Forum: Tuning Support: Making it Run
Topic: Vvt position error
Replies: 11
Views: 7766

Vvt position error

Not sure if vvt position bug has been fixed yet or not but thought I would bring it up. I have both intake and exhaust cam sensors connected and confirmed working. I haven't updated my proteus in a while so I will update it tonight and report back. For reference here is my last data log showing vvt ...
by Boostonabudget
Fri Apr 30, 2021 9:44 am
Forum: Tuning Support: Making it Run
Topic: Need to confirm cam sensors are working - console does not show two VVT senosrs
Replies: 4
Views: 3837

Re: Need to confirm cam sensors are working - console does not show two VVT senosrs

Can confirm after update both vvt1 and vvt 2 show up in the console 8-) still fighting a wierd issue where vvt pos said 800+ lol but that's for another day/thread
by Boostonabudget
Mon Apr 26, 2021 8:53 am
Forum: Dev: Software
Topic: How to compile the firmware
Replies: 135
Views: 718376

Re: How to compile the firmware

Having some issues getting anything to build firmware. Have Chibistudio installed with gnu gcc arm and everything I was told to get along with adding plenty of path directories. I see at least three separate red flags here. Please close Chibistudio and focus on compiling things from command line. A...
by Boostonabudget
Mon Apr 26, 2021 8:03 am
Forum: You and your build
Topic: Everything AUDM Ford
Replies: 4
Views: 3805

Re: Everything AUDM Ford

BA_BF_SX_SY_Falcon_Territory_CAN-IDs_-_Sheet1 (1).pdf
(136.77 KiB) Downloaded 245 times
by Boostonabudget
Mon Apr 26, 2021 4:42 am
Forum: Dev: Hardware
Topic: Rusefi wideband controller no communication
Replies: 7
Views: 4518

Re: Rusefi wideband controller no communication

Oh so hardware issue. What's the story about first chip committing supuku? Not really sure on this. There has been no wiring changes before or after the 1st chip. First time we plugged in the wideband it did the still current 4 flashes for overheat a few times while sorting out cranking settings, a...
by Boostonabudget
Sun Apr 25, 2021 4:49 pm
Forum: Dev: Software
Topic: How to compile the firmware
Replies: 135
Views: 718376

Re: How to compile the firmware

Having some issues getting anything to build firmware. Have Chibistudio installed with gnu gcc arm and everything I was told to get along with adding plenty of path directories. Not sure what's wrong and haven't deal much with these before so help would be very much appreciated This is the error I g...
by Boostonabudget
Sun Apr 25, 2021 3:39 pm
Forum: Dev: Hardware
Topic: Rusefi wideband controller no communication
Replies: 7
Views: 4518

Re: Rusefi wideband controller no communication

Boostonabudget did you resolve this? Please post a summary of the resolution. Resolved original issue yes, tuns out when the first chip committed supuku it took out the canbus on the carrier as well. After changing the carrier we fixed canbus and found the cause of the overheat issue to be somethin...
by Boostonabudget
Sun Apr 25, 2021 2:17 pm
Forum: Tuning Support: Making it Run
Topic: Need to confirm cam sensors are working - console does not show two VVT senosrs
Replies: 4
Views: 3837

Re: Need to confirm cam sensors are working - console does not show two VVT senosrs

I've made a chance to firmware - please try latest firmware let's see if engine sniffer would display two different VVT sensors Also please link your tune and logs to this thread if you see two VVT sensors on engine sniffer. Awesome no worries, I'll try it tomorrow along with the other changes I've...
by Boostonabudget
Sun Apr 25, 2021 9:14 am
Forum: Tuning Support: Making it Run
Topic: Need to confirm cam sensors are working - console does not show two VVT senosrs
Replies: 4
Views: 3837

Re: Need to confirm cam sensors are working

After some tinkering I found that the vr conditioner was not outputting any signal to the ecu and after swapping to a new conditioner I now have confirmed both cam signals are getting to the ecu's digital inputs.
screenshot__25_.png
screenshot__25_.png (65.2 KiB) Viewed 3811 times
by Boostonabudget
Sun Apr 25, 2021 5:46 am
Forum: Tuning Support: Making it Run
Topic: Need to confirm cam sensors are working - console does not show two VVT senosrs
Replies: 4
Views: 3837

Need to confirm cam sensors are working - console does not show two VVT senosrs

Don't seem to be getting any confirming data to say the ecu is getting cam sensor data, I may swap over the vr conditioner to a different chip just in case. Any help will be greatly appreciated
by Boostonabudget
Sun Apr 25, 2021 1:39 am
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

Can you ID which tune was used for those logs? There is now 6 tunes in there and it's hard to ID which one is correct. Going by the ID on the log your idle is still messed up as you have not corrected the things highlighted already in this thread. Please fix the things we have already pointed out a...
by Boostonabudget
Sat Apr 24, 2021 1:13 am
Forum: Dev: Hardware
Topic: Rusefi wideband controller no communication
Replies: 7
Views: 4518

Rusefi wideband not sending canbus data

Need to get wideband going to I can iron out my tuning. Have everything running OK enough for now with the only things left I need to tune requires me to have working wideband. I'm definitely out of ideas as to what would cause the controller to just not send any data at all. Have updated both contr...
by Boostonabudget
Fri Apr 23, 2021 7:49 am
Forum: Dev: Hardware
Topic: Rusefi wideband controller no communication
Replies: 7
Views: 4518

Re: Rusefi wideband controller no communication

made another log as per matts request for removing the connection to cars canbus and only using ecu to wideband, yet to see any data at all
canmessages.txt
(20.69 KiB) Downloaded 226 times
by Boostonabudget
Fri Apr 23, 2021 7:17 am
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

have up,loaded a new tune with the information i have been given, its definitely better but no were close to what i want, tries to idel at positive 16 now and hunts, any help?
https://rusefi.com/online/view.php?log=201
https://rusefi.com/online/view.php?log=202
by Boostonabudget
Thu Apr 22, 2021 10:20 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

mck1117 wrote:
Thu Apr 22, 2021 8:33 pm
Boostonabudget wrote:
Thu Apr 22, 2021 8:30 pm
My assumption
problem identified

please read the tooltips

image.png
Yeah I try to but half are missing or I don't understand them
by Boostonabudget
Thu Apr 22, 2021 8:31 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

Here's the tune from my car. I don't use any closed loop airflow idle, only closed loop timing, because that's all it needed. https://rusefi.com/online/view.php?msq=495 Ill have a go through your tune and compare bits. You seem to be having way more luck than me Sent from my SM-N975F using Tapatalk
by Boostonabudget
Thu Apr 22, 2021 8:30 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

@Boostonabudget do you have any suggestions for correcting the wording to make more sense? Reading over your issue, the first thing that comes to mind is adding "width" to the idle deadzone field. I wasn't even aware it said width. My assumption was that it's target rpm lol. Sent from my ...
by Boostonabudget
Thu Apr 22, 2021 1:50 pm
Forum: Tuning Support: Making it Run
Topic: how does auto mode tb work
Replies: 1
Views: 2894

how does auto mode tb work

for just open loop throttle control with the etb i cant get it to automatically adjust the etb for idle. auto mode basically stalls the engine forcing it closed and manual mode is well manual. would love more info on exactly how it works now that I know how to set up ignition tables
by Boostonabudget
Thu Apr 22, 2021 1:44 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

Having the idle VE and timing tables populated with some sort of base in the stock tunes would be helpful. When you are given basically a blank graph, its hard to know which way to go. exactly!! there is buggar all factory stuff that i can find so everything feels like guess work and i hate it lol
by Boostonabudget
Thu Apr 22, 2021 1:25 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

Just to note here, the ignition timing tables are advance tables. They dictate the amount of degrees the ECU will advance the spark timing before TDC. If you put positive values you get advance and timing will be BTDC, Negative values are ignition retard and cause the spark to be after TDC. This is...
by Boostonabudget
Thu Apr 22, 2021 1:18 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

see that information right there is what ive needed the whole time. I would never have been able to figure out how the hell that table is meant to be filled out, how does the table correct for over rpm tho? thats what i don't understand, or is it more just rpm/ignition table with idle adjusted with ...
by Boostonabudget
Thu Apr 22, 2021 1:05 pm
Forum: Tuning Support: Making it Run
Topic: Closed Loop idle issues
Replies: 19
Views: 12804

Re: Closed Loop idle issues

you'll have to explain further. I don't have enough information to understand what numbers I'm supposed to put into some tables, there isnt any specification on what setting can only take positive or what can take both