rusefi.com

Hello, this is my other room mates build. it started off as a regular 240 with a b230f with #3 rod hanging out the side of the block. After putting a new bottom end in it he started using it to tow and ended up needing another rebuild about a year later. One night we were discussing what we were goi...

Im using a 24 tooth outside wheel, inside of the wheel has a window the length of 2 of the 24 tooth wheel, I cant seem to get reliable operation of the inside wheel because the cam input seemed to be unreliable. I think you mentioned on the slack chat that however that the current firmware release h...

Ooh, more Volvo people! Automatic 4 speed. I've started the stopwatch for when your AW7x explodes... Have you done the accumulator mod yet to prolong its unfortunate life? NA 07 s40 throttle body with PLA adapter that I made in blender, same for the accelerator pedal. PLA? You're brave men bolting ...

That connector is a P2 ECM connector.

This my buddy and roomate Noahs old 1985 240. Its a 2 owner car, Him and the previous lady. Unfortunately it has some hail damage but over all the cars pretty decent. Has less than 200,000 miles on it and still on the stock block as well. Automatic 4 speed. When I first obtained this car for him the...

That did it! Ill go ahead and print a case and get rockin with this thing.

that explains a lot because all of the suggested firmware does succeed in uploading and operation but the moment tuner studio connects and attempts a page burn the unit begins to complain.

So thats what i originally thought as i saw some communication about that regarding the f7 vs f4 chips but I still lack a lot of understanding of this architecture. That's partly what made me think i needed a st-link programmer because i came across this page looking for key words about this dual ba...

IF all goes well I might buy a efr7670 and start a build thread on my s60R but currently im helping some locals with some standalones and also finally getting my volvo 240 b234ft build some love .

So I tried the packages in this picture below: image.png And it gives me this error with either one, also this is the same error that I've gotten with some of the other precompiled bundles. I also noticed that I cant seem to change the tune at all. Any write commands don't seem to work. fault only o...

Thanks! This will be my first dive into rusEFI . I don't normally make posts but im glad i did because i didn't know i was the first .6 user! Also do you recommend getting a st-link programmer or is the onboard usb adequate?

I recently bought a Proteus off ebay to start a project on my Volvo s60. I'm having trouble finding a working release of firmware for this board. Its labeled: rusEFI Proteus F7 v0.6 march 2021 CPU is STM32F767ZGT6 I attempted using the: 2021 May Proteus QC builds and i also tried the April build MAL...