rusefi.com

No, M50tu and later used a different offset. 324 degrees. M20,30,50, S50 and S54 use 84 degrees and M50tu, 52, 54 are 324 degrees. I can probably help here as I have my M20 wired up to run a red label ECU, drove it a couple of years on it before converting to RE. Unfortunately my full tune is on an...

ECU I extracted these from is the red label Bosch 413 DME with the greenish injectors on an m50. Hopefully I have some time next weekend to make the full change over to RusEFI, was having a hard time understanding how to set my trigger offset in this firmware in speeduino I am using -325 as my trigg...

I extracted the deadtimes from the stock ecu's flash

7.797 | 10.01 | 11.99 | 14.03 | 16.00 ->Volts
2.100 | 1.080 | 0.720 | 0.560 | 0.360 ->MS

the https://oshwlab.com/b.brazdziunas/scg-ecu_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy name is a bit odd make me wonder how is it different from https://oshwlab.com/b.brazdziunas/scg-ecu_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_cop...

in case anyone is wondering when wiring this ECU in the ETK(Wiring manual for BMW) calls out the VR lines for this DME pinout incorrectly Black == VR + Yellow == VR- https://docs.google.com/spreadsheets/d/e/2PACX-1vRgb0tgWirzJoIO0Qz_EQAvl6wBT_vaxBetzOQvYsFfJdMZeJuXVckhSHJkgPBncUU82OZAttoxrMw8/pubhtm...

Hello I have a bmw 325is that I am working to convert from the speeduino OS on its stm32 board to rusefi https://oshwlab.com/b.brazdziunas/scg-ecu_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy_copy https://media.discordapp.net/attachments/965115044633411584/9652176926363...

https://rusefi.com/docs/ibom/hellen88bmw-a-ibom.html


yah... the BOM is listed on your wiki....


at any rate looking forward to updates thanks for the reply

I figured out how to get the BOM but cant find any PCB schematics for this particular board or a for sale link in your shop

how does one go about acquiring a hellen88 pin for BMW ?