Search found 90 matches

by nmstec
Mon May 23, 2022 6:35 am
Forum: Dev: Hardware
Topic: Live Telemetry second attempt
Replies: 7
Views: 63

Re: Live Telemetry second attempt

NRF24 with external antenna. I had easy 300 meter through concrete.
by nmstec
Tue May 03, 2022 5:22 am
Forum: Dev: Hardware
Topic: GPS in place of VSS
Replies: 3
Views: 637

Re: GPS in place of VSS

From personal experience, GPS for VSS is terrible if you need it for mission critical things. Including deaccel, TCM & etc. If you're using it for speedo, its good enough. The issue lay in cities, or in terrible signal areas (Including tunnels). My recommendation, if you're going this route, is ...
by nmstec
Mon Apr 18, 2022 6:55 pm
Forum: Dev: Software
Topic: Proteus custom analog inputs
Replies: 4
Views: 608

Re: Proteus custom analog inputs

I have a car with a split fuel tank and 2 separate level sensors. I want to create a custom channel that calculates the total based on the two signals but am struggling to find where to define a custom analog signal... What am I missing? Usual way is to tie them inline. But otherwise, Simon is righ...
by nmstec
Sat Apr 16, 2022 3:02 am
Forum: Dev: Hardware
Topic: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Replies: 10
Views: 757

Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st

Andrey gave me till May 1st, I said by Monday (April 18th). I'd like to formally say I believe the more realistic timeline is 22nd of April. Using the following excuses: 1. STM ain't my thang, so good excuse to learn on it. Target is STM32f429-144. If I take a ChinaBluePill, and put real F103 on it,...
by nmstec
Fri Apr 15, 2022 9:51 pm
Forum: Dev: Hardware
Topic: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Replies: 10
Views: 757

Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st

That module is NOT programmed, as it came straight from dealer, however I also have the harness to it, and the door handle somewhere... Still looking for the door handle. It has a 3 position hall sensor inside, working on SENT.
by nmstec
Fri Apr 15, 2022 9:31 pm
Forum: Dev: Hardware
Topic: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Replies: 10
Views: 757

Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st

Better from 2022 Subrurban.
image.png
image.png (12.45 KiB) Viewed 704 times
by nmstec
Fri Apr 15, 2022 9:26 pm
Forum: Dev: Hardware
Topic: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Replies: 10
Views: 757

Re: Promise to Andrey: I will make a SENT to CAN translator by May 1st

image.png
image.png (9.42 KiB) Viewed 706 times
Please keep in mind that Mitchell is full of shit, and the "output" wire is actually SENT protocol.
Things I know: Contains TPS 1, TPS 2, TPS Overall.
Things I don't know: Speed, protocol, logic, Error handling.
by nmstec
Fri Apr 15, 2022 9:19 pm
Forum: Dev: Hardware
Topic: Promise to Andrey: I will make a SENT to CAN translator by May 1st
Replies: 10
Views: 757

Promise to Andrey: I will make a SENT to CAN translator by May 1st

Promise to Andrey: I will make a SENT to CAN translator by May 1st. As he requested, will be a functional prototype. Bet you will be done by Monday.

If I do this, he will no longer question my timelines.
If I do not do this, I will no longer question his timelines.
by nmstec
Tue Apr 12, 2022 5:39 am
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 43
Views: 8504

Re: Harley Requirements

Revision 1 Hellen has arrived.
by nmstec
Thu Apr 07, 2022 7:25 pm
Forum: Misc
Topic: marketing ideas. Maybe something out of 760?
Replies: 8
Views: 1851

Re: marketing ideas. Maybe something out of 760?

1x 5.3 w/4l60e being powered by proteus 1x LSX w/Sequantial 6speed powered by proteus. No rusefi TCM will be used in these, as they are going to movies. I will document all information, pictures, videos & etc. Upon the release of the series, I will give access to all of you for advertisement pur...
by nmstec
Fri Apr 01, 2022 5:17 am
Forum: You and your build
Topic: NA Miata EcotecMiata Race Car
Replies: 31
Views: 2121

Re: NA Miata EcotecMiata Race Car

I'm working on E39 on a Tahoe.
by nmstec
Sat Mar 05, 2022 1:09 am
Forum: Dev: Hardware
Topic: Foxbody 302 Proteus - Turbo
Replies: 0
Views: 3486

Foxbody 302 Proteus - Turbo

image.png
image.png (489.71 KiB) Viewed 3477 times
.
https://eectuning.org/forums/viewtopic.php?t=21267
by nmstec
Thu Jan 27, 2022 12:27 am
Forum: You and your build
Topic: 2018 Tahoe DI 5.3 "My funny gdi test mule"
Replies: 9
Views: 1102

Re: 2018 Tahoe DI 5.3 "My funny gdi test mule"

Since mark asked, here's the table for the lift pump control: edit: it looks like it's mechanically regulated, and this table is just to keep things just barely flowing through the regulator or something image.png According to the snippets above they do say the FPCM does control the fuel pump accor...
by nmstec
Wed Jan 26, 2022 7:06 pm
Forum: You and your build
Topic: 2018 Tahoe DI 5.3 "My funny gdi test mule"
Replies: 9
Views: 1102

Re: 2018 Tahoe DI 5.3 "My funny gdi test mule"

image.png
image.png (18.25 KiB) Viewed 1020 times
image.png
image.png (44.91 KiB) Viewed 1020 times
image.png
image.png (30.71 KiB) Viewed 1020 times
image.png
image.png (51.67 KiB) Viewed 1020 times
by nmstec
Wed Jan 26, 2022 4:26 am
Forum: You and your build
Topic: 2018 Tahoe DI 5.3 "My funny gdi test mule"
Replies: 9
Views: 1102

Re: 2018 Tahoe DI 5.3 "My funny gdi test mule"

High Pressure Fuel Pump The high fuel pressure necessary for direct injection is supplied by the high pressure fuel pump. The high pressure fuel pump is mounted on the rear of the engine under the intake manifold and is driven by a three-lobe cam on the camshaft. This high pressure fuel pump also re...
by nmstec
Wed Jan 26, 2022 4:18 am
Forum: You and your build
Topic: 2018 Tahoe DI 5.3 "My funny gdi test mule"
Replies: 9
Views: 1102

2018 Tahoe DI 5.3 "My funny gdi test mule"

It's terrible, but it's my test mule.
by nmstec
Tue Jan 25, 2022 3:19 pm
Forum: Dev: Hardware
Topic: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
Replies: 82
Views: 36668

Re: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor

mk e. you keep saying im off, dyno says i'm not. mk e. you keep saying im off, dyno & oem ecu says i'm not. If you already had the number from the OEM ECU why did you not just use it and save all the time and bother of trying to measure it? I'm sure a pressure sensor in the plug during cranking...
by nmstec
Tue Jan 25, 2022 5:19 am
Forum: Dev: Hardware
Topic: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
Replies: 82
Views: 36668

Re: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor

OK...got it now. Thanks for clarification. :) https://rusefi.com/forum/viewtopic.php?f=4&t=2229&p=43433#p43433 Crankshaft is located nice and deep in the belows of the engine. So when trying to get inthe ballpark of tdc offset, we had a ripped apart motor that was just enough to see and cal...
by nmstec
Mon Jan 24, 2022 11:42 pm
Forum: Dev: Hardware
Topic: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
Replies: 82
Views: 36668

Re: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor

OK...got it now. Thanks for clarification. :) https://rusefi.com/forum/viewtopic.php?f=4&t=2229&p=43433#p43433 Crankshaft is located nice and deep in the belows of the engine. So when trying to get inthe ballpark of tdc offset, we had a ripped apart motor that was just enough to see and cal...
by nmstec
Thu Jan 20, 2022 9:17 pm
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 43
Views: 8504

Re: Harley Requirements

Dave and I discovered yesterday that the stock air filter is stupid restrictive. Pulling up to an inch of mercury post 3300. Today we have done 3 more runs with no air filter, and by god torque curve is way better, with HP peak moving by 300-500RPM forward. Time to look into better air filters.
by nmstec
Thu Jan 20, 2022 1:44 am
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 43
Views: 8504

Re: Harley Requirements

Very rich AFR, very little timing, first revision tune on the Harley. For context, this exact bike, with the stock ECU made 70.1WHP Today we peaked at 78.4whp/101.3 w/ WCF. Massive thank you to Dave for the tuning & Simon for his vast knowledge on all engines. I'd say this is one hell of a succe...
by nmstec
Mon Jan 17, 2022 11:24 pm
Forum: Dev: Hardware
Topic: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
Replies: 82
Views: 36668

Re: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor

...did anybody continue applying a diesel pressure sensor to a gasoline engine? Or is this a dead thread? Drama , software,programmers are not interested in this topic ... Yes it dead The software, programmers would be false. I would love to continue progress on this. I have done something very bas...
by nmstec
Mon Jan 17, 2022 10:32 pm
Forum: Dev: Hardware
Topic: GDI overall status thread
Replies: 9
Views: 4730

Re: GDI overall status thread

Wiring diagram for 2014 Hyundai Genesis 3.8L GDI Fuel Injector Control Module - that module is on page 5
by nmstec
Mon Jan 17, 2022 10:23 pm
Forum: Dev: Hardware
Topic: Alternative To BMW DI module, Duramax FICM
Replies: 4
Views: 1055

Re: Alternative To BMW DI module, Duramax FICM

90,91 can bus So you need car to sniff can-bus to start injector driver ... No CanBus needed for this. But also easy, CANbus is my thing. CAN is only used for diagnostics as far as I recall, and itself takes no data in. Who knows if this diesel FICM would still operate well enough with petrol DI? D...
by nmstec
Mon Jan 17, 2022 5:34 pm
Forum: Dev: Hardware
Topic: Alternative To BMW DI module, Duramax FICM
Replies: 4
Views: 1055

Alternative To BMW DI module, Duramax FICM

It appears as though 2001-2004 6.6 LB7 Duramax used in silverados 2500HD & more, is basically the same, however with the addition of having 8 Cylinder control. GM Part # 97720663 Bosch Part # 0281010014 Online they are ridiculous, but at my local junkyard im quoted $60 CAD. This may be a better ...
by nmstec
Mon Jan 17, 2022 3:22 am
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 43
Views: 8504

Re: Harley Requirements

by nmstec
Sat Jan 15, 2022 8:17 pm
Forum: Tuning Support: Making it Run
Topic: On v12 banks
Replies: 13
Views: 2566

Re: On v12 banks

Audi used Dual Bosch modules, and VW v10 touareg ditto on the MED bosch modules.
by nmstec
Sat Jan 15, 2022 12:54 am
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 43
Views: 8504

Re: Harley Requirements

Harley now runs well enough for dyno steady state tuning w/ proteus & handmade shitty adapter. Next step, finishing good adapter design, tuning, debugging, and prototype production time!

Will be working on adding TJR transceiver to the schematics tonight. Love you all.