Search found 25 matches
- Thu Sep 07, 2023 4:02 pm
- Forum: Misc
- Topic: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
- Replies: 5
- Views: 7005
Re: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
Small Lua script function onKeyClick(bus, id, dlc, data) if data[1] == 0x80 then txCan(1, 0x20A, 0, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) elseif data[1] == 0x40 then txCan(1, 0x20A, 0, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) elseif data[1] == 0x20 then txCan(1, 0x20A, 0, { ...
- Thu Sep 07, 2023 2:27 pm
- Forum: Misc
- Topic: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
- Replies: 5
- Views: 7005
Re: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
Small info about how to use the keypad. Programming manual: 3K012-4RN3AG.pdf Default NodeId is 0x18A hex Wake up Keypad need to send ID = 000h, LEN = 8, Data = {01h 00h 00h 00h 00h 00h 00h} Enough send once after power up and Init message received ID = 70Ch, LEN = 1, Data = {00h} Keypad clicks retur...
- Wed Sep 06, 2023 6:06 pm
- Forum: Misc
- Topic: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
- Replies: 5
- Views: 7005
Re: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
DT06-4S
Also very nice stickers are available from Haltech for these keypads:
https://www.haltech.com/product/ht-011500-can-keypad-label-set/
- Tue Sep 05, 2023 7:51 am
- Forum: Misc
- Topic: Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
- Replies: 5
- Views: 7005
Reasonable priced Grayhill 12 and 20 button keypads availabe from DigiKey.
DigiKey has super cheap Grayhill 12 and 20-button keypads with CANOpen protocol. 12 button part code 3K012-4RN3AG CANOpen protocol https://www.digikey.co.uk/en/products/detail/grayhill-inc/3K012-4RN3AG/9809016 20 button part code 3K020-4RN3AG https://www.digikey.co.uk/en/products/detail/grayhill-inc...
- Tue Feb 28, 2023 7:57 pm
- Forum: Dev: Hardware
- Topic: Digital Dash Project based on STM32 MCU and TOUCHGFX
- Replies: 12
- Views: 15070
Digital Dash Project based on STM32 MCU and TOUCHGFX
Hi everyone After some discussions with rusefi team, I'm making this post about my digital dashboard project. From the beginning: Aftermarket Digital Dashboards are very expensive and in general limited to high-end manufacturers. In the past, I used AIM MXS STRADA 5-inch dash and ECU master ADU 5-in...
- Wed Aug 31, 2022 5:24 pm
- Forum: Dev: Hardware
- Topic: 4 and 8 port canbus hub
- Replies: 3
- Views: 3485
- Wed Aug 31, 2022 7:14 am
- Forum: Dev: Hardware
- Topic: 4 and 8 port canbus hub
- Replies: 3
- Views: 3485
4 and 8 port canbus hub
Hi I made 4/8 port canbus hub with common power rail and canbus end terminator resistors. The 4 port project can be found : https://oshwlab.com/b.brazdziunas/can-hub-mini s-l1600.jpg s-l1600 (1).jpg canhub.PNG The 8 port project can be found : https://oshwlab.com/b.brazdziunas/can-hub Can be used as...
- Thu Jul 07, 2022 8:12 pm
- Forum: Dev: Hardware
- Topic: PDM info dump
- Replies: 9
- Views: 6562
Re: PDM info dump
ETA makes SCS200 PDM. https://global.e-t-a.com/products/intelligent_power_distribution_systems/scsr_smart_control_systems/scsr_smart_control_systems_products/p/scs200/#downloadBlock1537 It is PDM without any brains, controlled by can messages. Put together Google drive folder with datasheets, manual...
- Sun May 22, 2022 7:35 am
- Forum: You and your build
- Topic: core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
- Replies: 17
- Views: 24109
Re: core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
Ben do you see core8 as assembled module? Someone from Italy has reached out to me about a module for older Fiats I did send a test unit to Italy. They are planning to run old Fiat 500 EFI conventions. As understood they have been looking for a cheaper solution to they conversion kit. Currently, th...
- Fri Apr 22, 2022 3:41 pm
- Forum: Dev: Hardware
- Topic: let's choose an enclosure
- Replies: 121
- Views: 115606
Re: let's choose an enclosure
Is there a premade case for MX23A34 or MX23A26 connector? Any links to Aliexpress for these cases?
- Thu Mar 03, 2022 12:56 pm
- Forum: Dev: Hardware
- Topic: HOWTO use Bluetooth module
- Replies: 36
- Views: 51657
Re: HOWTO use Bluetooth module
Maybe default Flow control?
Putty defaults to XON/XOFF- Thu Mar 03, 2022 12:25 pm
- Forum: Dev: Hardware
- Topic: HOWTO use Bluetooth module
- Replies: 36
- Views: 51657
Re: HOWTO use Bluetooth module
If anyone has an issue accessing JDY-31 using putty. 4afab98f1db9d61bbc477d42b3c4ff55.jpg You can try Arduino IDE serial monitor: image.png Also tried to use Serial Port Utility and it works as well. image (2).png Link to windows software: https://wiki.wit-motion.com/english/lib/exe/fetch.php?media=...
- Tue Feb 22, 2022 5:00 pm
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 564179
Re: Wideband Controller: Fully Custom, no ASIC!
Does anyone have STM32F042K6T in stock? Need 10 units in UK
- Wed Feb 09, 2022 8:35 pm
- Forum: You and your build
- Topic: core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
- Replies: 17
- Views: 24109
Re: core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
My tuner based in Lithuania, his name is Andy, he's been tuning cars for many years. He's very new to rusEFI but definitely going to use it all future projects. We will post some videos on youtube showing how rusefi runs on our cars but unfortunately don't have any decent videos just quick shots tha...
- Wed Feb 09, 2022 8:11 pm
- Forum: You and your build
- Topic: core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
- Replies: 17
- Views: 24109
Re: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
1. I just call it core8. 2. Plan it to use in all my project cars, also my tuner installed 4 of these Ecu's in some of his client's cars. 3. Yes one Aprilia Capanord runs this ECU but currently using another FW. 4. Yes it is easyEDa project. 5. I do have published v2.3 of this ECU on easyEda. 6. My ...
- Wed Feb 09, 2022 7:49 pm
- Forum: You and your build
- Topic: core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
- Replies: 17
- Views: 24109
core8: Hello Form UK/Lithuania! Custom 8CH ECU, Opel Manta(SAAB b234), m113 v8 5.0 twin turbo, EVO 5 builds
Hi everyone. My name is Ben. Started being interested in ECU's about 3 years ago, and build my first custom ECU in bout 2019. Since then went through about 20 iterations and ended up with rusEFI compatible ECU master board and some adapters. Master Board Spec: 50mmx 95mm in size, 4 layers STM32F407Z...
- Mon Oct 11, 2021 6:42 pm
- Forum: Dev: Software
- Topic: SD card support with SDIO
- Replies: 4
- Views: 12895
SD card support with SDIO
Hi. I did enable SD card support through SDIO in firmware and set pins to correct alternative functions. Flashed ecu and SD card becomes available with correct size as USB drive on Windows. But I can't format it from windows. I use 8GB sd card on a custom board. The question is how to format SD card...
- Fri Oct 08, 2021 1:56 pm
- Forum: Dev: Software
- Topic: How to enable canbus and SDIO on custom board?
- Replies: 4
- Views: 3206
Re: How to enable canbus and SDIO on custom board?
Sorry it started working on CAN1 after full powercycle on all can items (Dash, Canhacker and ECU)
- Fri Oct 08, 2021 10:54 am
- Forum: Dev: Software
- Topic: How to enable canbus and SDIO on custom board?
- Replies: 4
- Views: 3206
Re: How to enable canbus and SDIO on custom board?
What about CAN1 then, do I missing anything to get it enabled in FW?
- Thu Oct 07, 2021 9:05 pm
- Forum: Dev: Software
- Topic: How to enable canbus and SDIO on custom board?
- Replies: 4
- Views: 3206
How to enable canbus and SDIO on custom board?
Been testing rusEFI on the custom board and am almost got everything I need working. STMF407zg using SN65HVD230QDR CAN1 is on PD0 and PD1 CAN2 is on PB5 and PB6 Compiled with: #define EFI_CAN_SUPPORT TRUE Alternative pin mode PIN_MODE_ALTERNATE and PIN_AFIO_AF( 0, 9U) All set in TS but still no mess...
- Thu Oct 07, 2021 3:45 pm
- Forum: Dev: Software
- Topic: Some pin assignment reverts back to FW values and not being stored in Flash
- Replies: 2
- Views: 2599
Re: Some pin assignment reverts back to FW values and not being stored in Flash
Thank you Andrey. Yes it smells like Trabant but had this hardware so use what I have. Sorry will try to keep posts as minimal as possible.
- Thu Oct 07, 2021 3:41 pm
- Forum: Dev: Software
- Topic: Can not set trigger pins after compiling custom firmware.
- Replies: 5
- Views: 4234
Re: Can not set trigger pins after compiling custom firmware.
Ok. I'll keep in mind when going to assemble second board. Have 437zg and 469zi MCU. But for now will it still work on 407?
- Thu Oct 07, 2021 3:23 pm
- Forum: Dev: Software
- Topic: Some pin assignment reverts back to FW values and not being stored in Flash
- Replies: 2
- Views: 2599
Some pin assignment reverts back to FW values and not being stored in Flash
Bigger picture is in this post: https://rusefi.com/forum/viewtopic.php?f=2&t=2147&p=42497#p42497 Now new issue. Some pin assignments revert back to values set while compiling FW. For example, LED pin assignments (Running, Warning) and Primary CAN BUS pins reverts back after power cycle. Valu...
- Thu Oct 07, 2021 2:56 pm
- Forum: Dev: Software
- Topic: Can not set trigger pins after compiling custom firmware.
- Replies: 5
- Views: 4234
Re: Can not set trigger pins after compiling custom firmware.
Ok, Step back: I only used Hellen board build files as an example to get my head around how to build custom FW. The hardware I use is my custom STM32f407ZG board. Board has 24 LOW sides through VNLD5090, then 12 HIGH sides through TC4424, 2 Canbus, 2 14point7 lambda, 12 analog inputs, 8 digital inpu...
- Thu Oct 07, 2021 1:43 pm
- Forum: Dev: Software
- Topic: Can not set trigger pins after compiling custom firmware.
- Replies: 5
- Views: 4234
Can not set trigger pins after compiling custom firmware.
Compiled custom FW based on hellen72 config but can set trigger pins PE2-PE5 and others (except to PA7). FW compiled with no issues with options DDEFS += -DHAL_TRIGGER_USE_PAL=TRUE DDEFS += -DHAL_VSS_USE_PAL=TRUE As soon as I set pin to PE2 Critical alert LED lights up and get Error message in TS &q...