rusefi.com

Nightsknight45 wrote: ↑

Mon Apr 25, 2022 7:59 pm

Under the idle setting, I see that you have "Use separate VE Table for idle" set to true, you can try setting this to false and go within the VE table to pull fuel until the car idles at your desired afrs.

Update!!! I got the Idle tuning adjusted, thanks to NightsKnights45

Nightsknight45 wrote: ↑

Mon Apr 25, 2022 7:59 pm

Under the idle setting, I see that you have "Use separate VE Table for idle" set to true, you can try setting this to false and go within the VE table to pull fuel until the car idles at your desired afrs.

Ahhh.. thanks, I forgot about that. I'm gonna give it a try

I've tried change every parameter and can't seem to get the Idle to 14.7. It's always running very very rich to about 10.
Is there something i'm missing?
Can someone help me?

Here's my tune :
https://rusefi.com/online/view.php?msq=971

Thanks
Sitha

ahhh.. okay, that make sense, thank you

Is there a option to view the VE Table in 3D views similar to Mega squirt?
If so, how do I activated it?


Thanks
Sitha
https://www.youtube.com/c/HyperspeedMedia

AndreyB wrote: ↑

Thu Mar 24, 2022 1:29 am

HyperSpeedMedia wrote: ↑

Thu Mar 24, 2022 12:51 am

Hello AndreyB, how do I konw what board I have to upgrade the firmware? There is a 0.2 in the bottom. Thanks

That's a https://github.com/rusefi/rusefi/wiki/MREAdapter72 adapter soldered onto microRusEFI F4

So it's microRusEFI F4 firmware for this unit

Thanks alot for all your help...!!!!

Finally up a video up.
Here's the link for install and first startup.
https://www.youtube.com/watch?v=BQk3PkOk3eM

duhafnusa4 wrote: ↑

Tue Mar 22, 2022 11:44 pm

Pleaaaaaase provide photos, vids, and put your log on Rusefi.com/online

All of this helps to make Rusefi better for you.

I'm working on a video tonight, will post it up soon.
Thanks

AndreyB wrote: ↑

Tue Mar 22, 2022 11:43 pm

Time for fresh firmware

Hello AndreyB, how do I konw what board I have to upgrade the firmware? There is a 0.2 in the bottom. Thanks

Updated... finally up and running. Thanks

Ahh..thanks, let me try that

Here is link to the tune:
https://rusefi.com/online/view.php?msq=925

It a stock Miata NB2 with VVT using stock MAF sensor.
Everything is pretty much stock, I wanted to make sure it works before doing any modifications.

I will upload cranking datalog in a few minutes

MicroRusEFI PNP 0.2 for NB2 Miata VVT Hello, I have a older board on a NB2 VVT miata. Can someone help me get it up and running? I've setup the parameter as best as I can, it still doesn't start. Can someone check out my tune to see what setting is wrong? Or is there a base tune I can used? I'm pret...