rusefi.com

You mean my tune or the off the shelf tune?

Thanks. Will take a look. Seems the VE table will have to be adjusted.

Occured to me that I should link my Online uploads incase anyone else is interested. https://rusefi.com/online/view.php?msq=1506 and https://rusefi.com/online/view.php?log=1258.

I'm trying to figure out why my Beer Money ECU base map has an injector phase of -180. As a friend recently mentioned, "-180 seems odd, since I believe that would be after the intake valve closes." And also, "For injector timing, -180 = 540 degrees as its a 720 degree 4 stroke engine....

https://imagizer.imageshack.com/img923/8899/zEayQW.jpg The broken line is from a dyno session with the Link ECU four years ago. There are some anomalies, like why more boost in the mid range, but over all, I'm Psyched. Certainly have come a long way from my first post in this thread. Also, for novi...

https://imageshack.com/i/pobgG8upj https://imageshack.com/i/pmi4401jj https://imageshack.com/i/pnp4zv4Jj Paid $19 for an annual membership to imageshack, which I'd used for more than 10 years as a free hosting site. It's worth it to me not to screw around with icloud or google whatever. Let's see i...

Ha,ha,ha, looks like I'm going to be learning some more. Tried using Google Photo's as a link for the first time. Back to the drawing board.

Success, with the aforementioned PID tuning and some ign adv changes. Car is idling and we are actively tuning out richness up top. Here's the last tune and data log. https://rusefi.com/online/view.php?msq=1104 and https://rusefi.com/online/view.php?log=922. Ken's taken a little more fuel out above ...

Thanks. After reading your (mck1117's) brief paper, logging has become the easy task that it always should have been. Working on sorting out the idle, I had abnormal TPS behavior in that the needle was bouncing about and the tps had to be recalibrated every time I started the car. On one of yesterda...

Sandisk Ultra 64gb. I was using it straight from the package but when it wasn't being read I stuck it in my laptop and on the drive, clicked format. it's the second SD I've used, the first being a Lexar 64gb. Neither worked, making me think the issue might not be the SD. I've taken it out and put ba...

Great, concise explanation. Very helpful. Query, even though my ecu has a good SD card, I get "No SD card detected" regardless of when the USB is connected. If I take the SD out and plug it into my PC, it shows 0 data recorded?

Great suggestion, thanks. With the offset field set to 0, the idle, while sitting, went to about 1000-1050. With closed loop turned off, it went to around 800 (which should be good enough for me to use the timing light.) Issue is, that once I start driving, that consistency goes away and it returns ...

Please take a look at this idle log. https://rusefi.com/online/view.php?log=908 I was making a critical error in the log sequence but have now figured it out.

I've uploaded one of the last logs to work from 6/2. https://rusefi.com/online/view.php?log=907

I will try again as soon as I can.

I am hoping to try again later today. My noobness is showing since I only thought there was one way to log. With the car running and warmed up, I click on "Data Logging" and then "Start Logging." Then, without turning the ignition off, I click "Save" and the date and ti...

Okay, I did two logs today and I guess it looks like neither are good based on your comment. I had prior bad logs as well. I've already replaced the micro SD. Logging appears in TS and the file saves but the data is deficient. Is there a minimum amount of time for the log? I'll try again.

Also, AndreyB, I didn't take your point about, "seen "view" menu with too much internal data points maybe it would help." I see where "view" is in the TS options but I'm not sure what you mean about too much internal data points?

Okay, just did another log, which encapsulates the idle issue. https://rusefi.com/online/view.php?log=903 The log doesn't appear to show RPM (at least to me in megalog viewer) so I don't know what is going on.

Thanks for replying AndreyB. I tried to make two logs this morning, both when fully warmed up. The first would idle while sitting there but would die when coasting to a stop. TunerStudio said there was a problem with the TPS so I did another after calibrating and the car reverted to the prior inabil...

I noticed that my fuel VE was a little funky in that first .msq upload so I fixed it to the extent I could. https://rusefi.com/online/view.php?msq=1075 Still have the problem with the idle, although now it just dies. It's fine, though a bit high, for about 15 or 20 seconds though, making me think th...

This is an introduction as well as a request for help. I have a supercharged 95 (four pin coils) Miata with a lightweight flywheel that was using a FM Link ECU since 2005. It needed to be replaced and I considered Haltech, AEM and MSPNP but also knew that whatever ECU I got would only be as good as ...