rusefi.com

Sent from my iPhone using Tapatalk

Ive just seen the electronic wastegate video on youtube and thought to myself why dont i do that, so ive ordered a 06L145612 Turbo Wastegate Electronic Actuator from VAG cars for under $100 from aliexpress and i will integrate it into my project i dont think this will be too hard considering i have ...

Just a little update 122pin to MRE complete
Next step is to gut the tgv's and we should be good to plug it in

Is knock sensing available yet/at all? i read something somewhere where it could be included but cant find details, but i am a dumb dumb

got it sorted just played with drivers once in dfu mode

Stm32 boot loader is a little question mark and is not categorised as a usb device,

I tried that it just said unable to find device in the log

I think that’s due to the above


Sent from my iPhone using Tapatalk

ive got my ecu but cant update the firmware, installed drivers and getting this from the message window Andrew Ross <jrfantom@gmail.com> 10:03 PM (12 minutes ago) to me Using selected COM10 Reboot command [reboot_dfu] sent into serial=COM10! Giving time for USB enumeration... Executing .\STM32_Progr...

I’m my limited experience, I’ve allways left wall wetting alone and concentrated on acceleration enrichment you will find with logs you are using more throttle at lower rpm’s to to match rpm compared to higher rpm, a lean spike is normal to see when you stab the throttle, you just add fuel to accele...

i would like to increase boost with ethanol content and do a timing multiplier based on ethenol content and im sure lua can do it, i can understand the basics of the script, but im unable to implement them into tuner studio I can help once the vehicle is overall running under rusEFI. On the one han...

Yes but the tables are so I imagine you build the script
In the console with an “id” so you can assign table values in tuner studio


Sent from my iPhone using Tapatalk

New hooks to adjust closed loop boost target https://github.com/rusefi/rusefi/wiki/Lua-Scripting#setboostadd im not a smart person, can you or some other smart person, have a step by step guide for dummies, i would like to increase boost with ethanol content and do a timing multiplier based on ethe...

its ok if it isn't but awesome great edition to the project

That tuner studio setting help adjust how much change it should make, Easy it will make big changes with little hits in that cell eg 5 hits and there all between 10-15% off it will make a big 12.5 % quickly then if it get -5% after that it will change back dow 5% even off it hits only a few times. H...

I ordered mine on the 4 th is it the 0.6 board?


Sent from my iPhone using Tapatalk

this is the plan for the patch harness from the pigtail to the factory ecu, i need to buy a vr to hall for my cam sensor
If anyone see's any glairing problems please let me know

hey buddy bugeye wrx are 122 pin same as toyota/mazda, 03 change to a different plug, at the time i couldn't find any ecu headers to suit in ref to Subaru, so i found the connector number and ordered from Alibaba and ordered 10 of them as a minimum order, then i found that they fit other things and ...

Hey everyone im Andrew From Australia, i have audm my01 wrx that will be rusefi in the near future, I have previously built a ms3 a wired up to a Nissan pulsar sss, i enjoy, like all of us diy and ecu tuning, I currently are running a carberry flash tune, but hate flash tuning so are moving to the r...

Sorry buddy, ill post it in the feature request section, or do i do it here sorry for the confusion

There a few things that i think can add to the overall rusefi experience , the engine protection side of things that ties in with the sensors fuel and oil pressure and the launch control/ flat foot shifting, if you can grab it from the speeduino code it would make your product nearly complete