Search found 8 matches
- Sat Oct 28, 2023 3:09 pm
- Forum: Dev: Software
- Topic: SD card support with SDIO
- Replies: 4
- Views: 13636
Re: SD card support with SDIO
Just want to jump into this relatively old discussion since I didn't found and details regarding: 1) Which kind of SD card size / type (SDHC/SDXC) is accepted by rusEFI? and 2) Which file systems (FAT/FAT32/NTFS) are compatible with rusEFI? Background: I tried with an 8GB (micro) SD card, which work...
- Mon Jun 26, 2023 12:55 pm
- Forum: Dev: Software
- Topic: Malfunction Indicator Light (MIL)
- Replies: 1
- Views: 3013
Malfunction Indicator Light (MIL)
I'm just wondering, is the MIL actively used in the software showing any issues? I would like to see any abnormal engine conditions but looking at the code I see that setError() in malfunction_central.cpp is not really used anywhere?! Or am I looking on the wrong spot? What would be nice is the abil...
- Wed May 31, 2023 1:08 pm
- Forum: Dev: Hardware
- Topic: Eidothea 56pin ECU (based on Proteus v0.7)
- Replies: 1
- Views: 1601
Eidothea 56pin ECU (based on Proteus v0.7)
I designed a new board called Eidothea which is initially based on Proteus v0.7 and designed to be SW compatible! 4.jpeg The board fits directly into a cheaply available ECU housing . All sources available at github: https://github.com/tobsec/eidothea The BOM is designed to be completely assembled w...
- Wed May 24, 2023 9:57 pm
- Forum: Tuning Support: Making it Run
- Topic: Trigger Pattern Configuration for GM Vortec 5.7L L31
- Replies: 6
- Views: 8776
Re: Trigger Pattern Configuration for GM Vortec 5.7L L31
Similar thing just 36/0 image.png Tested today on the engine with more or less this config. I just used "second half" as cam signal is inverted and 4/0. Now it runs already pretty good after I had setup the position offset correctly. Uploaded my current tune . Now need to get idle air via...
- Tue May 23, 2023 9:58 pm
- Forum: Tuning Support: Making it Run
- Topic: Trigger Pattern Configuration for GM Vortec 5.7L L31
- Replies: 6
- Views: 8776
Re: Trigger Pattern Configuration for GM Vortec 5.7L L31
Ok clear, thanks a lot! I just quickly setup some test bench by generating the exact pulse pattern I’m expecting from the engine by an Arduino and fed it into an f4-discovery. Actual results looks pretty decent. Looking forward to test this config on the engine hopefully tomorrow. https://uploads.ta...
- Tue May 23, 2023 7:44 pm
- Forum: Tuning Support: Making it Run
- Topic: Trigger Pattern Configuration for GM Vortec 5.7L L31
- Replies: 6
- Views: 8776
Trigger Pattern Configuration for GM Vortec 5.7L L31
Thank you, I though the „advanced trigger“ options may only apply for VVT stuff according to the descriptions. But if it will help synchronize the 4x crank to be able to run full sequential it would be the perfect fit. I found the option „require cam/VVT sync for ignition“, I guess you meant to enab...
- Mon May 22, 2023 8:46 pm
- Forum: Tuning Support: Making it Run
- Topic: Trigger Pattern Configuration for GM Vortec 5.7L L31
- Replies: 6
- Views: 8776
Trigger Pattern Configuration for GM Vortec 5.7L L31
I‘m trying to get my 5.7L Vortec L31 engine running with the stock triggers. It has a 4x crank and 1x cam which is something I didn’t find any support for in the TunerStudio configuration options. The closest option I see is a Dodge RAM 8x crank / 1x cam which I already checked out in the source cod...
- Thu Feb 02, 2023 10:32 am
- Forum: Dev: Hardware
- Topic: Wideband Controller: Fully Custom, no ASIC!
- Replies: 211
- Views: 648684
Re: Wideband Controller: Fully Custom, no ASIC!
Hi guys, I found very little info documented about the differences of the multiple versions and revisions of the wideband controller which exists right now. Especially I see that progress is going on with the wideband-F103 which is now at rev5 and the wideband board_module . Also not sure if it is s...