Search found 11296 matches

by AndreyB
Wed Apr 21, 2021 12:26 am
Forum: Dev: Hardware
Topic: Debugging MicroRusEFI, can't connect openocd
Replies: 7
Views: 66

Re: Debugging MicroRusEFI, can't connect openocd

Dashboard would only be transmitting if a specific dashboard is selected. It needs to know if you want to send BMW Mazda or VW. Did anyone configure which one it is?

While I hear that Honolulu is a bit weird I am assuming it's not so bad?
by AndreyB
Wed Apr 21, 2021 12:01 am
Forum: You and your build
Topic: Nissan on Frankenso #47
Replies: 190
Views: 38744

Re: Nissan on Frankenso #47

You could be the only person who uses that LCD :( And very few Frankenso are being actively used these days. I am not sure if I have any working Frankenso, I probably do but focused on something else :( Sorry

Can you stay on December version for now?
by AndreyB
Tue Apr 20, 2021 11:57 pm
Forum: Dev: Hardware
Topic: Debugging MicroRusEFI, can't connect openocd
Replies: 7
Views: 66

Re: Debugging MicroRusEFI, can't connect openocd

That's getting more and more interesting, what are trying to debug on microRusEFI what is the big picture?

Where are you from?

Not even a discovery board to borrow ST-Link from Discovery or Nucleo?
by AndreyB
Tue Apr 20, 2021 11:28 pm
Forum: Dev: Hardware
Topic: Debugging MicroRusEFI, can't connect openocd
Replies: 7
Views: 66

Re: Debugging MicroRusEFI, can't connect openocd

but whhhhhhhhyyyyyy?
by AndreyB
Tue Apr 20, 2021 3:27 am
Forum: Dev: Software
Topic: ECU high-level programming
Replies: 7
Views: 120

Re: ECU high-level programming

https://github.com/rusefi/funnyvm is the attempt to pile together a subset of a JVM in 5 minutes. So far it's a failed attempt - I do not speak Makefile enough :(
by AndreyB
Tue Apr 20, 2021 3:26 am
Forum: Dev: Software
Topic: ECU high-level programming
Replies: 7
Views: 120

ECU high-level programming

Since very early days of rusEFI I am curious about a toolchain for higher-level programming. I still do not have a great solution. FSIO is an approach where we build our own language - that's really a lot of effort, FSIO would never be making developers more efficient, only limited scope. Not really...
by AndreyB
Mon Apr 19, 2021 11:43 pm
Forum: Dev: Software
Topic: Transmission Control logic
Replies: 51
Views: 14378

Re: Transmission Control logic

Kudos David

by AndreyB
Mon Apr 19, 2021 11:03 pm
Forum: Dev: Hardware
Topic: Hellen 121 Nissan hellen121nissan
Replies: 5
Views: 508

Re: Hellen 121 Nissan hellen121nissan

Step 1: remove fluid bottle neck...
image.png
image.png (2.47 MiB) Viewed 44 times
by AndreyB
Mon Apr 19, 2021 10:54 pm
Forum: Dev: Hardware
Topic: SBC Single-board computers
Replies: 21
Views: 5099

Re: SBC Single-board computers

nanopi duo2 my new love http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo2#Dimensional_Diagram

smaller than rpi zero and no butt soldering to have USB comms with rusEFI
by AndreyB
Sun Apr 18, 2021 6:35 pm
Forum: Dev: Hardware
Topic: Renault special 60 -2 flywheel on microRusEFI
Replies: 26
Views: 498

Re: Renault special 60 -2 flywheel on microRusEFI

Angles from sync point.

If there are no sync points in sight it would be n/a
by AndreyB
Sun Apr 18, 2021 5:47 pm
Forum: Dev: Hardware
Topic: Renault special 60 -2 flywheel on microRusEFI
Replies: 26
Views: 498

Re: Renault special 60 -2 flywheel on microRusEFI

Realistically there are two people who can help here - Matt and myself.

I would not have time to thing about this until around April 30th. You best shot until April 30th is to chase Matt on Slack.
by AndreyB
Sun Apr 18, 2021 1:49 pm
Forum: Dev: Software
Topic: Does the new trigger need decoding? Kawasaki KX450F
Replies: 28
Views: 575

Re: Does the new trigger need decoding? Kawasaki KX450F

https://rusefi.com/forum/download/file.php?id=7328 is an example of what I expect to see with ""Display logic signals" to "true"" - instead of bars for signals I am hoping to see just the important lines. Can you please attempt "Display logic signals" to "...
by AndreyB
Sun Apr 18, 2021 2:00 am
Forum: Dev: Software
Topic: Does the new trigger need decoding? Kawasaki KX450F
Replies: 28
Views: 575

Re: Does the new trigger need decoding? Kawasaki KX450F

Please set "Display logic signals" to "true"

Please remove spark plugs, crank it long and post both engine sniffer image and "verbose trigger sync messages" text

At this point I have no idea what is wrong where.
by AndreyB
Sat Apr 17, 2021 1:49 pm
Forum: You and your build
Topic: Golf Mk2 Rust bucket with 1.8T 20V engine swap
Replies: 4
Views: 148

Re: Golf Mk2 Rust bucket with 1.8T 20V engine swap

1.8T?

That sounds like https://rusefi.com/forum/viewtopic.php?p=39606#p39606 we hope to have first prototypes in about 5 weeks.
by AndreyB
Fri Apr 16, 2021 1:32 pm
Forum: Dev: Hardware
Topic: Proteus - Waterproof, High-feature ECU!
Replies: 214
Views: 61315

Re: Proteus - Waterproof, High-feature ECU!

MrRobogoat wrote:
Fri Apr 16, 2021 8:54 am
Any tips?
Please be more specific. I believe that spelling out what you were able to order would help someone help you. Maybe pictures of your boards? Maybe "Hello World" thread? :)
by AndreyB
Fri Apr 16, 2021 2:22 am
Forum: Dev: Hardware
Topic: Renault special 60 -2 flywheel on microRusEFI
Replies: 26
Views: 498

Re: Renault special 60 -2 flywheel on microRusEFI

event index within cycle
by AndreyB
Thu Apr 15, 2021 11:35 pm
Forum: You and your build
Topic: red 2003 VVT test mule Miata NB2 #27
Replies: 212
Views: 90557

Re: red 2003 VVT test mule Miata NB2 #27

instantRpm was showing nice but value way 10% off! to be honest that's not how i was guessing it would show but at least it was wrong in this regard

nb2 decoder fixed by moving two points by 10 degrees

attached jimstim setup for nb2
by AndreyB
Thu Apr 15, 2021 3:44 pm
Forum: Dev: Hardware
Topic: Hellen One Platform
Replies: 22
Views: 3519

Re: Hellen One Platform

so the idea is to have the Hellen connector be the "native" mazda miata NA engine ECU connector? so the Hellen can just plug into the mazda engine wiring harness and Off-You-Go ? No wiring harness adapter needed? Hellen One Platform is convention for module reuse, like PC or PCI or USB. H...
by AndreyB
Thu Apr 15, 2021 1:50 am
Forum: Dev: Hardware
Topic: Hellen 72 - Miata NB2 up to 8 cylinders
Replies: 22
Views: 1342

Re: Hellen 72 - Miata NB2 up to 8 cylinders

Default tune sparks both coils now, apparently it's MUCH easier to start a cold car on 4 cylinders than on two cylinders.





Unable to properly upload logs due to https://github.com/rusefi/rusefi/issues/2554
by AndreyB
Wed Apr 14, 2021 11:42 pm
Forum: Misc
Topic: Powder Coating
Replies: 4
Views: 2608

Re: Powder Coating

a shop next to Nik made a few used cases look like $1m
by AndreyB
Wed Apr 14, 2021 10:11 pm
Forum: Dev: Hardware
Topic: Hellen 72 - Miata NB2 up to 8 cylinders
Replies: 22
Views: 1342

Re: Hellen 72 - Miata NB2 up to 8 cylinders

This USB connector is spaced a bit to clear the recommended case.
by AndreyB
Wed Apr 14, 2021 6:19 pm
Forum: Dev: Hardware
Topic: Hellen 72 - Miata NB2 up to 8 cylinders
Replies: 22
Views: 1342

Re: Hellen 72 - Miata NB2 up to 8 cylinders

So while I am fighting with NB2 trigger decoding we got things running on NA6 :)

by AndreyB
Wed Apr 14, 2021 12:06 am
Forum: Dev: Hardware
Topic: Renault special 60 -2 flywheel on microRusEFI
Replies: 26
Views: 498

Re: Renault special 60 -2 flywheel on microRusEFI

JPh wrote:
Mon Apr 12, 2021 4:24 pm
trigger detail messages.txt
Gap in range.

There is a complaint about "visual of the vw pattern picture : it looks like the renault pattern but is not because it's high long tooth only."

Are there any other complaints?
by AndreyB
Tue Apr 13, 2021 8:57 pm
Forum: You and your build
Topic: V12 M73 to Audi trans, with Proteus in Lamborghini Replicas
Replies: 97
Views: 8911

Re: V12 M73 to Audi trans, with Proteus in Lamborghini Replicas

"Miata Is Always The Answer" is very relevant for purposes of CLT sensor selection. Also VAG.
by AndreyB
Tue Apr 13, 2021 4:27 pm
Forum: Dev: Hardware
Topic: Proteus - Waterproof, High-feature ECU!
Replies: 214
Views: 61315

Re: Proteus - Waterproof, High-feature ECU!

Lambo97 wrote:
Tue Apr 13, 2021 3:11 am
Thanks for case, what about increasing the wall height to allow the rear USB to be cabled to the front on a plug? Just a thought.
https://www.ebay.com/itm/333958050504 is an alternative case bundled with a relevant connector
by AndreyB
Tue Apr 13, 2021 5:07 am
Forum: Dev: Software
Topic: Does the new trigger need decoding? Kawasaki KX450F
Replies: 28
Views: 575

Re: Does the new trigger need decoding? Kawasaki KX450F

I am really sorry but I really need the tune not attached but uploaded to https://rusefi.com/online

flipping VR wires probably maybe changes gap messages, I guess we will see once I can comfortably see your tune online.
by AndreyB
Tue Apr 13, 2021 4:25 am
Forum: Dev: Software
Topic: Does the new trigger need decoding? Kawasaki KX450F
Replies: 28
Views: 575

Re: Does the new trigger need decoding? Kawasaki KX450F

Just changed it a bit to "from 1.71 to 2.85" but that would not change anything for you, your values are way off what I expect. I could be wrong in my expectations.
by AndreyB
Tue Apr 13, 2021 4:15 am
Forum: Dev: Software
Topic: Does the new trigger need decoding? Kawasaki KX450F
Replies: 28
Views: 575

Re: Does the new trigger need decoding? Kawasaki KX450F

My trigger decoder expect a higher magic gap once in a while - closer to 2.28 Maybe you need to flip your VR sensor wires or change the software settings to start responding to other front? Please post your tune on rusEFI online Have you figured our the "does not save settings" issue? inde...
by AndreyB
Tue Apr 13, 2021 3:56 am
Forum: You and your build
Topic: V12 M73 to Audi trans, with Proteus in Lamborghini Replicas
Replies: 97
Views: 8911

Re: V12 M73 to Audi trans, with Proteus in Lamborghini Replicas

Lambo97 wrote:
Tue Apr 13, 2021 3:46 am
the other to close when key turned off
As of right now ECU shuts down when you turn the key off. While we are flirting with delayed ECU shutdown as of today there are major code defects there and it's disabled.