Hello, you managed to make the successful connection of the bluetooth module, I am trying to make it in microrusefi 0.6.0 but I have not been able to
In advance I thank those who help me for their time.
Search found 9 matches
- Mon Nov 13, 2023 7:06 pm
- Forum: User Support
- Topic: STM32F407VGT6 Bluetooth PC10/PC11 Problem
- Replies: 10
- Views: 10798
- Tue Nov 07, 2023 5:41 pm
- Forum: Dev: Hardware
- Topic: microRusEFI IGN error
- Replies: 1
- Views: 9014
microRusEFI IGN error
very good afternoon, I am opening this topic so that you can guide me regarding a microRusEFI 0.6.0 board that I assembled I am already doing tests on an engine, I have a problem with the ign outputs or coil outputs, since they do not turn on, I have tried with a multimeter and placed the outputs, i...
- Tue Oct 24, 2023 6:22 pm
- Forum: Dev: Hardware
- Topic: obd1 honda/gm daughterboard. 27sf512 EEPROM emulator
- Replies: 19
- Views: 30286
Re: obd1 honda/gm daughterboard. 27sf512 EEPROM emulator
Hello to all, I have been lurking and following for a few years. This will be my first post. I would like to say rusefi open source platform has been great for the diy tuning efi community. I have considered spinning rusefi board with pnp connector for obd1 honda. However most folks seem to be perf...
- Mon Oct 16, 2023 2:10 pm
- Forum: User Support
- Topic: microrusefi 0.6.0 wrong battery voltage
- Replies: 12
- Views: 13712
Re: microrusefi 0.6.0 wrong battery voltage
..as I see on first photo ... (probably) all OP-Amps has bad soldered pins .. some other IC also ... few resistors not looks so good.... ..probably too many problems on it.... :roll: solved, friends, it was actually a cold welding on a vbat resistance, the repair with the cautín and problem solved,...
- Sun Oct 15, 2023 2:29 pm
- Forum: User Support
- Topic: microrusefi 0.6.0 wrong battery voltage
- Replies: 12
- Views: 13712
Re: microrusefi 0.6.0 wrong battery voltage
I tested the exits and entrances using ardustim, 100% assembled by my hands
Enviado desde mi Redmi Note 8T mediante Tapatalk
- Sun Oct 15, 2023 1:55 pm
- Forum: User Support
- Topic: microrusefi 0.6.0 wrong battery voltage
- Replies: 12
- Views: 13712
Re: microrusefi 0.6.0 wrong battery voltage
I manufactured it, I ordered the board from jlpcb and the components from digikey, I am an enthusiast of the motor world, I come from speeduino and now I want to know rusefi, I have already tested the functionality of this ecu and everything is fine except the voltage reading
- Sun Oct 15, 2023 12:11 pm
- Forum: User Support
- Topic: microrusefi 0.6.0 wrong battery voltage
- Replies: 12
- Views: 13712
Re: microrusefi 0.6.0 wrong battery voltage
Yes, I have tested 3.3v and 5v and it is fine, the only anomaly is the 12v voltage reading.
- Sun Oct 15, 2023 4:36 am
- Forum: User Support
- Topic: microrusefi 0.6.0 wrong battery voltage
- Replies: 12
- Views: 13712
Re: microrusefi 0.6.0 wrong battery voltage
Hello, I assembled the microRusEFI myself, I attach a photo of the place where I connected the 12v
- Thu Oct 12, 2023 2:45 am
- Forum: User Support
- Topic: microrusefi 0.6.0 wrong battery voltage
- Replies: 12
- Views: 13712
microrusefi 0.6.0 wrong battery voltage
https://www.facebook.com/607657938/videos/199147859743018/ Hello, good afternoon everyone, I have a problem with my microRusEFI R6.0, when connecting 12v to the tunnerstudio the indicator gives 21.4v, which may be generating this fault. I listen to suggestions and I tried to look for the menu Base ...