What should be used?
Search found 174 matches
- Tue Jul 10, 2018 5:42 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
- Wed Jul 04, 2018 12:05 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Can be used normally, but there are problems warning TPS 2018-07-04 19_02: EngineState: WARNING: TPS too low: 0.03 2018-07-04 19_02: EngineState: WARNING: TPS too low: 0.15 2018-07-04 19_02: EngineState: WARNING: TPS too low: 0.03 2018-07-04 19_02: EngineState: WARNING: TPS too low: -0.03 tpsinfo 20...
- Fri Jun 22, 2018 6:13 pm
- Forum: Dev: Software
- Topic: CAN support
- Replies: 68
- Views: 63616
- Fri Jun 22, 2018 3:23 pm
- Forum: Dev: Software
- Topic: CAN support
- Replies: 68
- Views: 63616
Re: CAN support
uno r3 and mc2515 conect to fankenso canbus it can connect to 2515, ok. iso15765-4 i don't know bit and kband. http://blog.dimitarmk.com/wp-content/uploads/2016/12/wiringarduinomcp2515.png /************************************************************************************************* OBD-II_PIDs ...
- Fri Jun 22, 2018 3:12 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
new firmwaer ok no warningrussian wrote: ↑Tue Jun 12, 2018 9:46 amJust made a chance to make these warnings more detailed - please update to latest firmware and tell me the new message
https://github.com/rusefi/rusefi/commit/e3dfcc4df910e033788a3eb838db2b8754d737db
- Tue Jun 12, 2018 8:31 pm
- Forum: Dev: Software
- Topic: CAN support
- Replies: 68
- Views: 63616
Re: CAN support
What do I use to get value canbus?
- Tue Jun 12, 2018 9:22 am
- Forum: Dev: Software
- Topic: CAN support
- Replies: 68
- Views: 63616
Re: CAN support
i want to try MCP2515 CAN Bus Module Receiver SPI for arduino.
https://www.aliexpress.com/item/Smart-Electronics-MCP2515-CAN-Bus-Module-TJA1050-Receiver-SPI-Module-for-arduino-Diy-Kit/32709839532.html?spm=a2g0s.9042311.0.0.27424c4dOtI3UV
https://www.aliexpress.com/item/Smart-Electronics-MCP2515-CAN-Bus-Module-TJA1050-Receiver-SPI-Module-for-arduino-Diy-Kit/32709839532.html?spm=a2g0s.9042311.0.0.27424c4dOtI3UV
- Mon Jun 11, 2018 6:19 pm
- Forum: Dev: Hardware
- Topic: Prometheus - NEW compact ECU shield!
- Replies: 160
- Views: 189664
Re: Prometheus - NEW compact ECU shield!
very beautiful
- Mon Jun 11, 2018 5:05 pm
- Forum: Dev: Software
- Topic: CAN support
- Replies: 68
- Views: 63616
Re: CAN support
I want to test signal canbus for Frankenso. Do not know what's wrong? What should i use for the test, pls advise 2018-06-12 00_02: EngineState: CAN TX PB6 2018-06-12 00_02: EngineState: CAN RX PB12 2018-06-12 00_02: EngineState: type=3 canReadEnabled=Yes canWriteEnabled=Yes period=50 2018-06-12 00_0...
- Mon Jun 11, 2018 4:16 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
I don't know how did it happen WARNING 2018-06-11 23_04: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00 2018-06-11 23_04: EngineState: WARNING: interpolate: Same x1 and x2 in interpolate: 0.00/0.00 2018-06-11 23_05: EngineState: WARNING: interpolate: Same x1 and x2 in in...
- Sat Jun 09, 2018 4:09 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
I can start the engine with the value.
trigger type= miata NA
trigger angle offset =0
advance deg = 15
charge =70
it ok for mitsubishi
if connect afr LSU 4.2 need to use cj125 ?
trigger type= miata NA
trigger angle offset =0
advance deg = 15
charge =70
it ok for mitsubishi
if connect afr LSU 4.2 need to use cj125 ?
- Mon May 28, 2018 4:01 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
help me
The right values for first start engine.
what default standard for mitsubishi?
old config 2015
The right values for first start engine.
what default standard for mitsubishi?
old config 2015
- Sun May 27, 2018 8:19 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
The problem that from pb1 ่junp to ground.
- Fri May 25, 2018 8:57 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
- Wed May 23, 2018 5:08 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Did you update your discovery programming chips interface? See below for some instructions on how to update the discovery firmware. https://rusefi.com/wiki/index.php?title=Manual:Software:User/en#Load_firmware yes firmware new v2.J29.S0 https://i.imgur.com/dnzjtHL.jpg https://i.imgur.com/eOq2V46.jp...
- Wed May 23, 2018 6:43 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
step 1 erase chip step 2 program new firmware error ERROR: CRC header size EngineState: FATAL error: HW timer state 1 2018-05-23 13_15: CommandQueue: SerialIO started 2018-05-23 13_15: SerialManager: Opening port: COM5 2018-05-23 13_15: EngineState: WARNING: flash CRC failed 2018-05-23 13_15: Engine...
- Mon May 21, 2018 12:08 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
error after set_engine_type 16 2018-05-21 19_00: EngineState: confirmation_set_engine_type 16:18 2018-05-21 19_00: EngineState: unknown [set_engine_type 16] 2018-05-21 19_00: EngineState: 140 actions available 2018-05-21 19_00: EngineState: pins: 0 parameters 2018-05-21 19_00: EngineState: help: 0 p...
- Fri May 18, 2018 9:11 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
I don't know knock sensor freq override for mitsubish 4g93
firmware 20180401
set_engine_16 fatail error HW timer
firmware 20180401
set_engine_16 fatail error HW timer
- Thu May 17, 2018 6:46 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Hello.
I came back after long gone.
How far is the development?
can use old config?
I came back after long gone.
How far is the development?
can use old config?
- Sat Oct 10, 2015 1:48 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Sorry I have not hard-coded your config yet :( There are some comments on top of the source code files, Most comments are in https://svn.code.sf.net/p/rusefi/code/trunk/firmware/console/binary/tunerstudio_io.cpp also something in https://svn.code.sf.net/p/rusefi/code/trunk/firmware/console/binary/t...
- Sat Sep 26, 2015 1:24 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
I want to know if the protocal between TS with STM 32 to find out from where?
- Mon Aug 31, 2015 12:14 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Edited from the original.russian wrote:"change" or "new"?Tambralinga wrote:Pls change new config
Are we changing existing config or creating a new config so that there are two different Mitsubishi configs?
- Sun Aug 30, 2015 6:02 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
CLT GPIO PC3 Low temp 20 Resistor 2500 middel Temp 23.9 resistor 2080 Hi temp 80 resistor 300 IAT GPIO PA1 Low temp 8.9 Resistor 7000 middel Temp 30.6 resistor 1930 Hi temp 63 resistor 560 Crank coolant temp Coolant Correction -18 160 -7 150 4 135 16 125 27 116 38 108 54 102 71 100 TPS PC1 CLT PC3 ...
- Wed Jun 17, 2015 8:43 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Input speed sensor pull-up or pull-down? pull-up and op-amp in case of my hall sensor, yours could be different, My VSS hall sensor uses same exact circuit as your your shaft position hall sensor: pull-up, then op-amp, then op-amp output is traced to VSS rusEfi pin which is PA8 in my case. If my ha...
- Mon May 11, 2015 6:14 pm
- Forum: Dev: Software
- Topic: stepper motor logic
- Replies: 45
- Views: 36423
Re: stepper motor logic
http://www.stealth316.com/2-isc-iac.htm
ISC for mitsubishi all model
You are an example for the use on Rusefi ?
ISC for mitsubishi all model
You are an example for the use on Rusefi ?
- Mon May 11, 2015 5:58 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Input speed sensor pull-up or pull-down?
- Sat May 09, 2015 7:31 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
New firmware @8050 cann't set analog input mode in TS.
- Thu May 07, 2015 4:01 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
sorry ,Knock sensorrussian wrote:???Tambralinga wrote:Now can use Know sensor?
- Thu May 07, 2015 7:22 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Now can use Know sensor?
- Fri Apr 17, 2015 4:27 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244353
Re: Mitsubishi 4G63 and 4G92 (#6)
Ok
The problem now is to write data the TS.It will stop for 10 seconds if Brun program.
Dev console :can not edit table?
The problem now is to write data the TS.It will stop for 10 seconds if Brun program.
Dev console :can not edit table?