Search found 136 matches

by spags
Tue May 31, 2016 2:45 pm
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Hi!

I've been a little out of touch. Hopefully i will be able to play with the board in the car some time this weekend. In the process of moving so free time is at a premium.

Very exited to see the new improvements!
by spags
Mon Apr 27, 2015 2:27 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

TS question. I'm in the process of cleaning up the config, specifically for the idle controller area. Running into the following issue. Going to rest for a bit, but this is the problem i'm having. Any pointers or ideas welcome. 2015-04-26 22_20: EngineState: firmware error: TS page size mismatch: 14...
by spags
Sun Apr 26, 2015 6:27 pm
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Ok, progress. Conformed fsio with a/c is working, as you said needs to be reset after assigning the pin. Persistent configuration struct. Have not tested yet but found the following size mismatches: console/binary/tunerstudio_configuration.h:#define PAGE_0_SIZE 15288 integration/rusefi.xml: <filesiz...
by spags
Sun Apr 26, 2015 3:07 pm
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Ok, update time. This weekend i carved out some time to play with rusefi. Bit of a frustrating weekend but some progress was made. What works: VE Analize: Works awesomely, got a tune that i can drive around. Soooo close to me being able to daily this! What don't work: A/C - Cannot get fsio to work, ...
by spags
Sun Apr 05, 2015 3:20 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

I have a simple 1.8 L honest engine, no cheats :D , no vvt (variable valve timing, rotates the intake camshaft to retard or advance the intake timing) and no vics (variable manifold cavity size to help with resonance). I might upgrade to a VVT head, they drop right in. Maybe someday.... Re: Tube len...
by spags
Sun Apr 05, 2015 2:14 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Another update: - MAP sensore is wired in the car. Burned the 3 bar one i had and had to go to the store and get a 1 bar (yay better resolution!). Don't put 5 volts into the Vout line of a GM style MAP sensor, it will ruin it. Ask me how i know :x - VE auto tune in ts does not work atm. It leans the...
by spags
Sat Apr 04, 2015 4:20 pm
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Ok some updates. AFR Sensor: - I have an Innovate LC-2, the output was either 0v or 5v. It would work right after turning on the engine and it would freak out as the engine warmed up. Re-calibrated the sensor and the problem went away. MAF: - The MAF curve I calculated is wrong. Runs way to lean wil...
by spags
Fri Apr 03, 2015 3:00 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Yeah, it didn't feel like it was using any accel enrichment. It did feel tighter than just the using the fuel map though (which is to be expected). PS: at the moment the guy with most miles on his rusEfi has like three times the width of your island! you would have to drive in circles :) This is awe...
by spags
Fri Apr 03, 2015 2:49 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

I'm back in black! IMAG0316.jpg After getting my car back from the paint shop and being bogged down from work for the last couple of weeks, I've finally had some time to work on rusefi! So first thing i do is recompile latest version in the repo and run it in my car. After checking that everything l...
by spags
Sun Mar 01, 2015 3:37 am
Forum: You and your build
Topic: Miata NA 1996, 1.8L stock (#7)
Replies: 101
Views: 89848

Re: Miata NA 1996, 1.8L stock (#7)

Awesome,

Mine requires about 10% more. I wonder if it's because of the temperature difference.

Are you running the solenoid frequency at 500? Wonder if that would have to do with variation.
by spags
Thu Feb 26, 2015 1:21 pm
Forum: You and your build
Topic: Miata NA 1996, 1.8L stock (#7)
Replies: 101
Views: 89848

Re: Miata NA 1996, 1.8L stock (#7)

Hi tomiata, good to have another miata running the board!

The code for set_idle_pwm was changed to make more sense at some point. Now it takes a value between 0-100 and it will ignore out of bounds values.
I found that 40 makes mi car idle at around 1200, 35 is more like stock.
by spags
Tue Feb 17, 2015 3:35 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Car specific update. Working on getting LM_REAL_MAF fueling working for the miata. Specific code for this is in https://github.com/jmt42/rusefi-code/tree/miata_maf The rusefi.ini TS file has a working mass air flow gauge. The miata maf data seems right and produces sane values (at least while cranki...
by spags
Tue Feb 17, 2015 3:04 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Here is a longer run. index,average,stdev 0,0.0,0.0 1,42.17,17.039548954459697 2,103.1875,41.69524596059227 3,185.885,75.1099363789981 4,197.9425,79.98203722443826 5,245.65375,99.26023343248508 6,260.48625,105.25347838670227 7,355.47375,143.6356152548624 8,416.485,168.28839905692507 9,498.65625,201....
by spags
Tue Feb 17, 2015 3:01 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Here ya go index,average,stdev 0,0.0,0.0 1,48.74,0.5515432893255079 2,118.835,1.039446968344224 3,212.885,1.4919953083036048 4,226.6,1.4990663761154839 5,280.245,2.255670631985085 6,296.515,2.4112341238461448 7,402.95,2.743574311003801 8,474.02,5.232590180780476 9,574.705,15.888689373261743 10,590.0...
by spags
Mon Feb 16, 2015 4:43 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

What's the expected kG/Hr at idle, and at full RPM? AKA what at the expected min and max you'll see on that chart? Those numbers are going to depend on the VE of the engine at that RPM and load value. I did a comparasion on this in this post http://rusefi.com/forum/viewtopic.php?f=5&t=825&s...
by spags
Mon Feb 16, 2015 2:37 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Ok, update. Progress - Run the function all the way to 5 volts. - Scaled from o2 mass to air mass (what the MAF actually sees). Errors be here. - Script now generates c code for pasting into a maf transfer function for the firmware. Remaining - Validation using known MAF logs. - Test this sucker on ...
by spags
Sun Feb 15, 2015 6:14 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Ok, more progress. - I modified the program to feed on many logs so I can fill in the blanks of the parts i'm missing. - I added a curve fitting function that exports the transfer function into a csv. - Documented and cleaned the code enough to be able to publish it. What remains to be done. - Extra...
by spags
Sun Feb 15, 2015 12:42 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

And looking at your latest images posted suggests there's inconsistencies right there, on the bench...? I don't have a bench and I don't want to build one right now. The source of this data is from the car running, those inconsistencies right there are the reason I stand by the "a bench is alw...
by spags
Sun Feb 15, 2015 5:17 am
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Ok, here is a data set I collected back in December. It's across a wider RPM range.

There are two filters applied. Green is AFR's between 14.4 and 15
Red is AFR's between 0 and 9.
good_bad_ugly.png
good_bad_ugly.png (40.83 KiB) Viewed 20104 times
I have to get a similar data-set at an even wider range to get a healthy curve.
by spags
Sun Feb 15, 2015 4:27 am
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Ok, 1st hack, this is what I have to show for it. Next up is getting cleaner data at a wider and more dense RPM range. EDIT: Horizontal is voltage, vertical is kg/h Red is calculated air mass as kg/h and blue is estimated air mass based on RPM, displacement and VE, using a fixed VE of .5, which is o...
by spags
Sat Feb 14, 2015 5:08 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Also, Habemus data! I ran the car at 3 rpm points, tuned to 14.5 AFR and ran if for a few seconds. Should be enough to get an idea if the approach works. Now comes the code, sifting through all that data, and getting how much fuel is in the engine per unit of time, finding out how much air should of...
by spags
Sat Feb 14, 2015 4:54 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Back on topic.... Point being you can't assume the values you might get on a test bench will transfer directly to, and be immediately applicable to your vehicle unless that test bench has your entire intake tract in place EXACTLY as it sits in your vehicle. Yes and no ;) Yes I agree that testing in...
by spags
Fri Feb 13, 2015 7:56 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

I am surprised no one has put that Miata MAF on an air flow bench - do not tuners use these and have these devices? If tuners use and have air flow benches that's what we need. Maybe the data is somewhere maybe it's worth asking a question on the Miata forums? Yeah, I've searched and asked, everybo...
by spags
Fri Feb 13, 2015 12:19 pm
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Thanks for the input. Does that apply to both types of MAF sensors... frequency and current? No idea, only seen hot wire analog signal transfer functions, but I understand the exponential nature of the output is due to the resistance/temperature curve on the hot wire material. Do you have any publis...
by spags
Fri Feb 13, 2015 3:39 am
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

Re: MAF transfer function from injectior duty and AFM.

Ok, I can read this statement two ways: - Just swap the MAF. Tickles my OCD the wrong way. No worky, not reliably anyways. MAF's are very sensitive to intake changes (the reason most tuners just go to SD and ditch the intake). Having mismatched diameters (miata maf's have two different diameters on ...
by spags
Fri Feb 13, 2015 2:23 am
Forum: Dev: Software
Topic: MAF transfer function from injectior duty and AFM.
Replies: 25
Views: 20752

MAF transfer function from injectior duty and AFM.

Hi everybody, I've been trying to reverse engineer the transfer function for the MAF in my car. I got some curves from a forum but these look wrong. I'm posting this here because it should benefit any car with a single MAF and I'm looking for feedback, would it work?, if not why not and how to fix i...
by spags
Tue Jan 27, 2015 2:13 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Ok, will test later. Could be the console. I didn't see anywhere in addConsole() anything that could come close to triggering this. If it's happening from within the console firmware it's some kind of bad freaky. I noticed that the new console code stores some sort of state between runs. Where is th...
by spags
Tue Jan 27, 2015 2:03 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Good to be back!

Any confirmation/fix for the testmil() bug?
by spags
Mon Jan 26, 2015 1:48 am
Forum: You and your build
Topic: 1994 USDM Mazda Miata #11
Replies: 172
Views: 115221

Re: 1994 USDM Mazda Miata #11

Ok, update. I finally got around to working on the milbench code and testing it. It would look like this in injector_central.cpp. extern OutputPin checkEnginePin; void milBench(void) { brainPin = boardConfiguration->malfunctionIndicatorPin; pinX = &checkEnginePin; delayMs = 0; onTime = 3000; off...
by spags
Sat Jan 10, 2015 8:32 pm
Forum: Misc
Topic: EFI+Machine Learning+Linux+Raspbery Pi = ?
Replies: 3
Views: 4260

Re: EFI+Machine Learning+Linux+Raspbery Pi = ?

Site used to be better, every once in a while little jewels like this pop up.

Detroit -> Michigan, they where using a GM engine. Hmm, makes sense.