Search found 27 matches

by tigeryan
Sun Feb 21, 2021 7:46 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Need to migrate to fresh firmware maybe one day but right now attached is in the car.

Code: Select all

this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sat Feb 02 20:30:30 EST 2019
by tigeryan
Wed Jul 15, 2020 3:07 am
Forum: You and your build
Topic: 88 Ford Mustang - 302 V8
Replies: 4
Views: 3924

88 Ford Mustang - 302 V8

Starting a new project with rusEFI to power a Ford Mustang V8 using the microRusEFI....will be adding details and such as things get underway... The reason for the swap from the stock A9L is I have been dealing with a No Spark condition with the card over the last two years, spend a good chunk of mo...
by tigeryan
Thu Aug 17, 2017 12:53 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

I posted over there, looks like there might be a few questions for you to answer....
by tigeryan
Sat Dec 03, 2016 4:06 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

That is an awesome article...

Starting to assemble all our race videos here too

http://www.lemonswiki.com/team.cfm/1/
by tigeryan
Sat Nov 05, 2016 2:13 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Rear facing camera...

[video][/video]

[video][/video]
by tigeryan
Fri Nov 04, 2016 3:11 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Drew is still processing the front facing cameras and I need to do the same with the rear facing camera...
by tigeryan
Fri Nov 04, 2016 2:33 am
Forum: Misc
Topic: Raspberry Pi Zero
Replies: 14
Views: 10504

Re: Raspberry Pi Zero

How about a logging system for acceleration, deceleration, G-force and GPS tracking?
by tigeryan
Fri Nov 04, 2016 2:30 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

PS. 649.6 race miles on the car @ New Hampshire...
by tigeryan
Fri Nov 04, 2016 2:29 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

So we got thru the New Hampshire race with some minor issues: Broke a clutch cable --- 20 minute fix lost 2 bolts on a motor mount, which caused us to eat a v-belt, ended our day an hour early... A car no fire on our first pitstop, car came in fine, fueled it and it wouldn't stay running, would star...
by tigeryan
Mon Aug 01, 2016 11:59 am
Forum: Dev: Hardware
Topic: frankenso ->stm32f4 overcurrent?
Replies: 23
Views: 17399

Re: frankenso ->stm32f4 overcurrent?

Not sure if Drew mentioned it to you or not but we confirmed startup of the Festiva with the newer firmware on Friday night...We need to get the right tune into the board as the car was running really, really, really fat...
by tigeryan
Tue May 24, 2016 1:13 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

I thought we had seen the car weighing in at 1600, could be 1800lbs...
by tigeryan
Tue May 24, 2016 1:07 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Car weighs about 1600lbs, drivers were probably in the 200-250 range, probably use 225 as a safe number....car holds 10 gallons of fuel as well...
by tigeryan
Thu Feb 18, 2016 4:01 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Ok folks, this Saturday is the big day...We are taking the car to the dyno! We have done a bunch of learning driving up and down the driveway and made a ton of progress and learned a lot to this point...Including making sure the upper intake gasket is sealed properly (set us back two weeks)... So, w...
by tigeryan
Wed Dec 09, 2015 1:50 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Quick update...we have the new motor in the car and running on both stock computer and rusEFI, we need to button up a few things under the hood before we start tuning, however we have added a couple of gauges to make tuning easier, one of which is a wideband O2 sensor...dyno session after the new ye...
by tigeryan
Wed Mar 04, 2015 1:50 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Well, I wouldn't say prolonged running, but we did 20+ pulls on the dyno on the Saturday without any issues and the system was running the entire time....Now it was about 50-60 degrees in the shop so it wasn't like it was race conditions in May @ NJMP...
by tigeryan
Thu Feb 26, 2015 3:09 am
Forum: Dev: Software
Topic: Firmware developent status
Replies: 498
Views: 662444

Re: Firmware developent status

What type of specs would you like to have? I might have access to some hardware that is certainly better then that box....
by tigeryan
Tue Feb 24, 2015 3:05 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Also, don't we have an engine cover somewhere in the spare parts that we can get the reference marks off of?
by tigeryan
Tue Feb 24, 2015 3:03 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

I found this Mazda Miata ignition timing table on another forum...
by tigeryan
Tue Feb 24, 2015 2:32 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Yeah, we did a pull on the OEM ECU and video recorded the timing gun on the car, then did the same with rusEFI and used that to see that we needed more timing on the upper end of the pull...after the adjustments we were really close to what the OEM was doing regarding timing advance... The idea that...
by tigeryan
Sun Feb 22, 2015 9:43 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

Not 100% sure yet, we tried throwing additional fuel and additional timing at the motor and it improved some with fuel, no real measurable improvement with additional timing. We have a few other things we are looking at to get the horsepower back into to car at the top end of the RPM range...we are ...
by tigeryan
Sun Feb 15, 2015 7:03 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

[video][/video]

Got the sensor issue fixed and the running on all four cylinders next up dyno day
by tigeryan
Sun Feb 15, 2015 7:01 pm
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

[video][/video]

First video of the car running with us troubleshooting a sensor issue
by tigeryan
Thu Feb 12, 2015 4:19 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Re: Ford Festiva / Protege / Miata motor (#3)

I will post pictures Saturday of the case...Waiting for one part to finish it off...And will remember to take video on Saturday when we fire it up...

We are hoping to take it to the dyno the weekend after next to see what it does with the stock computer and then with the rusEFI...
by tigeryan
Wed Feb 11, 2015 12:00 am
Forum: You and your build
Topic: Ford Festiva / Protege / Miata motor (#3)
Replies: 94
Views: 65718

Ford Festiva / Protege / Miata motor (#3)

Starting a new thread for us to discus what we are doing with the rusEFI with the 24hoursoflemons 93 Ford Festiva... We have had the car running on the rusEFI, fixed some sensor wires, adding another vacuum sensor and made a trick case cover... Hopefully this coming weekend we get to rev the motor a...
by tigeryan
Tue Feb 10, 2015 11:55 pm
Forum: You and your build
Topic: 1993 Mazda Protege (#3)
Replies: 12
Views: 17630

Re: 1993 Mazda Protege (#3)

How big do you want them? I can go up to 11" tall, unlimited long :)
by tigeryan
Mon Feb 09, 2015 1:00 am
Forum: You and your build
Topic: 1993 Mazda Protege (#3)
Replies: 12
Views: 17630

Re: 1993 Mazda Protege (#3)

I have a few of those decals for you...and can make other sizes if you need them :)