Search found 142 matches

by Spine
Wed Sep 18, 2019 2:25 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

That would be awesome! Thank you.
by Spine
Wed Sep 11, 2019 4:40 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

mck1117 wrote:
Tue Sep 10, 2019 9:08 pm
I can certainly find/dump a stock 4.8 or 5.3 (or whatever) tune. Which cam is in each car? Stock GM truck?
5.3 from a 2001 GMC Yukon (drive by cable)
5.3 from a 2004 Chevy Silverado 2500 (drive by wire)
by Spine
Tue Sep 10, 2019 9:03 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

By the way, I have an HPTuners license (and interface), so I can at least read GM ECUs, and view tunes uploaded by others to the HPT website. So I can rip particular maps (VE, injector compensation, etc) out of factory tunes if you're interested. Yes, I would be interested - however I don't have a ...
by Spine
Tue Sep 10, 2019 8:59 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Jersey City, NJ?!? I go to MahWah, NJ often (at least 6-8 times a year) for work. Mildly amusing. Anyway, I'm going to put the drive-by-wire on my 1965 Impala and continue to run the stock ECM. However, on my 1985 TransAm, I'm going to put the drive-by-cable and eventually install the rusEFI system....
by Spine
Fri Sep 06, 2019 10:49 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Ok, So I've got two LS engines lined up. One for my Trans Am swap, and one for my Impala swap; both are complete and ready to run with harness, ECM, and accessories (alternator, water pump, etc.). One LS is drive-by-wire and the other is drive-by-cable. My question... 1.) Does rusEFI support drive-b...
by Spine
Thu Aug 01, 2019 8:04 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Not sure if anyone knows about this site, but there is a LOT of information on Chevy engines that were fuel injected. This page was built specifically for engine swaps. It has pinouts for the ECMs based on years, trouble shooting, etc.

http://www.chevythunder.com/
by Spine
Thu Aug 01, 2019 7:46 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

What year is the engine? Rather, which crank trigger wheel does it have? Late (post-2005 ish) engines use a 60-2 trigger wheel like tons of European engines, and are well supported. Early engines (pre-2005, like mine) use a 24x wheel which is supported in theory, but I don't think have ever actuall...
by Spine
Wed Jul 31, 2019 7:51 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Yes, as I already have the WBO2, I'll just use it in the crossover on my exhaust (when I get that part built). I have no idea why I was even asking about the other O2 sensor...just a dumb moment I guess... lol
by Spine
Wed Jul 31, 2019 4:56 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

What do you expect from NO2? Why would you use it?
I was hoping for a basic/rough AFR that can be used with TunerStudio's autotune to get a basic start. Then manually fine tune it from there.
by Spine
Mon Jul 29, 2019 11:25 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Is there an option for multiple O2 sensors (example: left bank and right bank)?
Does the firmware now support 1 wire (oem cheap crap) O2 sensors or only wide-band still?
by Spine
Mon Jul 29, 2019 5:36 am
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Ok, so I believe I figured it out... I used the wrong firmware; I used the "rusefi_bundle.zip" and it didn't work with TS. When I looked at all the firmware options, I tried "rusefi+bundle_frenkenso_na6.zip", and it worked great with TS. I also don't have the "disconnects&qu...
by Spine
Mon Jul 29, 2019 4:45 am
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Limited telepathic abilities - which of two communication channels are you using and why? I believe you can adjust baud rate setting in TS for USB/TTL and I prefer using microUSB based real USB anyway. On the stm32 card, I use the miniUSB for power, and use the "PROG" miniUSB on the Frank...
by Spine
Sun Jul 28, 2019 11:43 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Did something change to the connection with the new firmware? I just downloaded it, wiped the stm32, and installed the new firmware. It boots up like it usually does (can see the LCD like before), but I can't connect at 38400. I can connect at 115200, but it's very unstable. With TunerStudio, I can'...
by Spine
Sun Jul 28, 2019 4:07 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

I will definitely look into the wago style and test them to see how I like them for this application. As for standard butt connectors, I have a couple tools for them (and a ton of connectors) - the ratchet style crimp tool and the reverse hand crimp (crimp side on the same side of the hinge as your ...
by Spine
Sun Jul 28, 2019 6:49 am
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

I've been using the soldering butt connectors for a while with a good success rate. There are a few I'll have to redo - usually when I'm not paying attention, but overall they work as described. They use a lower temp solder, and as long as you use the heat gun properly, you won't overheat the shrink...
by Spine
Sat Jul 27, 2019 10:20 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

What dates? Let's discuss this on Slack. It sounds crazy but on same dates I would be available to help remotely. That would be awesome. This will be done in Aberdeen, WA. The actual dates are still to be determined. I'll have to get a different oil pan to get the engine to fit, I'll need the exhau...
by Spine
Sat Jul 27, 2019 9:09 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

At this time, I'm not sure what type of pickup it is. I'll be wiring rusEFI on the spot. I'll have all of my wiring equipment with me including "soldering butt connectors" (which are really cool - you strip the ends of the wire, slip them in and 'mesh' the wires together in the solder poin...
by Spine
Fri Jul 26, 2019 3:01 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Well, coolest thing - I just got a call from the guy I sold my 1965 Impala to. He wants to sell it back with an LS upgrade, and a 4speed. He said he doesn't have a wiring harness for the engine. I told him I've got this rusEFI that I could use, sent him links to the website. He was very interested i...
by Spine
Thu Jul 25, 2019 8:57 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Well, it's been a couple years (life just got too crazy). I still look at the car every time I go in the backyard. Part of me wants to finish it, and part of me wants to take the computer and the WBO2 out and put it all in my 86 IROC (but I believe I'd need a second WBO2). I just installed 42lb inje...
by Spine
Wed Apr 26, 2017 2:44 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Nice, I did not know that the micro-USB on the STM32 discovery board did not have a baud rate. So, hypothetically, we can bump that up to max and test then slowly drop till we get a stable connection at it's fastest.
by Spine
Tue Apr 25, 2017 3:30 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

I will definitely do that. We are not talking baud rate, but INI blockReadTimeout settings correct? After looking at the debug log, I think starting at 5000 may be a good spot (5seconds) then go from there (increasing by 250ms or decreasing by 250ms). But this will have to be in about 2 weeks when I...
by Spine
Tue Apr 25, 2017 3:18 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

It's the miniUSB on the Frankenso board (not discovery board). But it also happens when I use the microUSB on the discovery board.

When I get back, I'll definitely change INI file.
by Spine
Mon Apr 24, 2017 9:12 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Here is the only entry for today on the TunerStudio MS log file...
TunerStudioAppDebug.txt
(749.22 KiB) Downloaded 804 times
by Spine
Mon Apr 24, 2017 9:06 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

serial_com_error.jpg
serial_com_error.jpg (311.28 KiB) Viewed 22128 times
by Spine
Mon Apr 24, 2017 8:57 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

That does sound familiar. Give me a minute and I'll run outside and check real fast.

The firmware version is "snapshot_20170403_2148_rusefi"
by Spine
Mon Apr 24, 2017 8:26 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Yes I can do that, however it will be in about a week or so. I'm leaving right after work and won't be able to get to it today...unfortunately. So here's what I do... 1.) Turn on rusEFI (vehicle ignition) 2.) Connect USB to laptop (laptop dings stating it's connected it does not ding any other time,...
by Spine
Mon Apr 24, 2017 7:54 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Hahaha, what do ya know - right there...
TunerStudioAppDebug.txt
(346.8 KiB) Downloaded 833 times
by Spine
Mon Apr 24, 2017 7:30 pm
Forum: You and your build
Topic: 1990 Geo Storm GSI - Advice/Suggestions? #18
Replies: 272
Views: 188308

Re: 1990 Geo Storm GSI - Advice/Suggestions? #18

Ok, so I've pretty much got the noisy trigger figured out - I just took the trigger wires out, twisted them nice and tight, then reinstalled them and Poof!, it's fairly smooth now. As far as the disconnect issue goes when burning - I'll have to try and find an open sourced screen capture program so ...
by Spine
Mon Apr 24, 2017 7:12 pm
Forum: You and your build
Topic: BMW E36 rusEFI PnP #35 [Update 6/1-18]
Replies: 23
Views: 17910

Re: BMW E36 rusEFI PnP #35

Will this also be a direct drop-in for the E46 models? 1995-2001 323i E46 with the M52TUB25? (http://mywikimotors.com/m52b25/)

If so...I wouldn't mind alpha/beta testing!!! ;) ;)