rusefi.com

I am thinking the synchronized (ioLock) stop the incomingdata thread from inserting new data in the buffer. you can easily see when the dropPending is removed, first byte arrive, then second time around the loop 3 bytes arrive. I agree the extra sleep(100) should never get used. I will checkout your...

Loaded IntelliJ IDEA.. and ventured into JAVA for he first time.. having fun.. and learning. what I have found is the Switch to Binary implementation "~ '\n" seems a little unreliable. The snap shot below, seems to work on on my machine. but still not great.. what I have changed: a. commen...

is 115200 the correct baud rate.. I noticed TS can change the baud rate ? just a thought..

logs.. // from Console..

last one first.. and seems to be the largest.. 78K

I am currently doing an SVN update from "https://svn.code.sf.net/p/rusefi/code/trunk"

If it helps..

is this the correct version.. Download IntelliJ IDEA..

https://www.jetbrains.com/idea/download/#section=windows

?

okay sounds like . I will all three first.. and get back to you.

you said "install Jetbrains IDEA, Java JDK and let me in via teamviewer to see if I can debug this?"

It may have to be tomorrow afternoon...

and then send you a teamviewer invite..

O/C = PB1 to GND = open circuit (no jumper) I am using windows 10. Java 1.8.0_66. tried the Microsoft and ST virtual serial port driver both work with TS. neither work with the Java Console. with the jumper PB1 connected (PB1 to GND). both USB ports connected. Blue LED flashing at the slower rate. S...

still no comms with Console. but it works with mitty a terminal emulator at 115200. sounds like a Java problem or is the console setup for 115200 ? output from mitty on Com3. using MicroUSB and PB1 O/C. line:916:time,127.238,rpm,0,ENGINE_LOAD,41.82,MAP,41.82,afr,10.01,ks,0.00,kv,0.0 0,TP,0.00,CLT,47...

If it helps.. TS always works regardless of PB1 open or short to GND - on the micro USB port. I am thinking it may need a pullup on PB1 or weak pullup enabling in the ST32 micro.?? To switch the port. I am using the ST4 discovery board right out the box, nothing connected. I am going to look at the ...

Hi, My steps as follows. using http://rusefi.com/wiki/index.php?title=Manual:Software:User/en the instructions. downloaded the tools,including the ST virtual Com port Driver. programmed the ST F4 board using ST Link. with rusefi_release.bin. binary. blue light flashing. I am using ..\snapshot_201602...

Hi, I cannot seem to get the Micro\USB port to switch to the Rusefi_DevConsole. I tried connecting PB1 to GND to swap the ports but still the Tunerstudio is connected to the MICRO/ USB. ????


Update: PB1 no longer needed as of 2019

Hi, looking forward to getting started.

Engine. Ford Twin Cam & racing kent FF1600 engine. 4 cylinder
Custom trigger wheel on crank, twin coil, wasted spark, TBs 40 choke..


Bye for now..