Search found 109 matches

by theflyingdutchp
Wed Mar 17, 2021 4:56 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Wow I thought I updated this! :oops:

1. Wiring damage isolated and repaired or removed
2. Car runs - tuning is hard :lol:
3. Smoke screen - activated by engine braking :?
by theflyingdutchp
Tue Oct 06, 2020 7:30 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Thankfully the symptom of mine was that it just popped the fuse, so no other damage done (and that fuse was only for the heater fan, so it didn't take anything else out with it). I just had to take the dash partially apart, find the wire and offending clip, tape over the tiny hole in the wire, and ...
by theflyingdutchp
Mon Oct 05, 2020 2:52 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Oh no! That's never fun. There must be something in the air, because I was just chasing a short in the wiring harness too. Volvo thought it was a good idea to route a single wire (no looming!) next to a sharp metal clip, that eventually wore a hole in the insulation and shorted it to ground. Ugh! Y...
by theflyingdutchp
Sat Oct 03, 2020 10:56 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Well I've isolated all the damage but I have no idea what happened. That circuit doesn't interact with the EFI at all...
Anyway, disabled that circuit - car still starts, idles, runs enough for me to move it around.

More news in a few weeks hopefully.
by theflyingdutchp
Thu Sep 10, 2020 2:09 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Well I'm still around - had some pretty serious issues on the first test drive including letting the smoke out of the harness :oops: There is some serious damage to some parts the harness. I think I had a bad fuse, the body of it melted but it didn't pop. It seems all isolated to one circuit but I n...
by theflyingdutchp
Sun Aug 23, 2020 4:20 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

This is now https://github.com/rusefi/rusefi/issues/1719 "Unclear report asking to rename tables" Please focus on just this issue. Please describe the problem from the beginning. What is this about? What is expected behavior? What is actual behavior? Why do you care? Hey Andrey, thanks fo...
by theflyingdutchp
Sat Aug 22, 2020 11:08 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Got the tables working in MegaLogViewer HD https://i.imgur.com/xR7BLLw.png To get it working, add two pages to the .msq. The advance table and the ignition table should be copied into the first page and renamed "veTable" and "advanceTable". Copy your RPM and load bins (ignition_ ...
by theflyingdutchp
Thu Aug 20, 2020 4:12 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Can I upload to rusEfi youtube? So uhh, I did a thing :D https://i.imgur.com/hf0aaYr.jpg https://i.imgur.com/UzlFHCs.png I want to say thanks again for all the support previously. I could not have done it without you Andrey, or kb1gtt, and probably many other people I'm unfortunately forgetting. Tu...
by theflyingdutchp
Wed Mar 25, 2020 6:55 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

AndreyB wrote:
Wed Mar 25, 2020 6:33 pm
Can I upload to rusEfi youtube?
I don't know if it's that interesting, but sure, go for it
by theflyingdutchp
Wed Mar 25, 2020 6:15 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Not pictured: the James Bond smoke screen I'm laying and the friendly looks from all my neighbors. Yes that is an intercooler where my hood should be - this has been low buck since day one :D Should anybody want to convert a 3SFE in the future, some quick notes: * 4T wheel inside the distributor wor...
by theflyingdutchp
Fri Mar 20, 2020 4:24 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Well, it drives. I had started on this project to control fuel/timing to support the addition of a turbocharger. Well, I installed the turbo, finished the exhaust fabrication, did a million other little things... And the turbo needs a rebuild badly. So does the engine (I've known that one for a whil...
by theflyingdutchp
Tue Mar 03, 2020 9:39 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Refreshed the grounds on that side of the motor (cleaned contacts and fasteners) and added a new one - fixed the issue for the most part. Still not 100% perfect but way better. It runs! (Badly :D) It was misfiring like crazy at first, but I was able to get a decent very-low throttle idle after some ...
by theflyingdutchp
Tue Feb 18, 2020 2:32 am
Forum: You and your build
Topic: 86 Toyota MR2 AW11 + 4A-GE small port [Frankenso]
Replies: 46
Views: 39532

Re: 86 Toyota MR2 AW11 + 4A-GE small port

Looking great! Is that a TVIS manifold? I thought the small port didn't have it?
by theflyingdutchp
Tue Feb 18, 2020 2:06 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

AndreyB wrote:
Tue Feb 18, 2020 1:55 am
...In my case part of the remedy was a jumper cable between cylinder head and battery negative terminal.

When I had vehicles with VR quite often it was helpful to have RB01 0R, i.e. grounding one of the VR wires...
I'll see about reducing resistance to ground and try again, thanks for the tip!
by theflyingdutchp
Tue Feb 18, 2020 1:46 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Still having issues. Sync is super stable with ignition disabled, but with it enabled I think some noise is getting into the VR circuit. The EWD suggests that the wiring is shielded.. I'm considering installing resistors R111 and R112 - thoughts? kb1gtt - you seem like the hardware guru? Logs attach...
by theflyingdutchp
Tue Feb 11, 2020 1:15 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

From looking at the logs it seems that when the coil fires there is some cross talk with the crank position. I've changed the setting to use a fixed timing which is not simultaneous with TDC. Testing to follow in the next few days. This appears to have fixed it. I actually ended up using a nonzero ...
by theflyingdutchp
Mon Feb 10, 2020 5:20 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Did some more testing today. Disconnected all the wires for the 24T wheel (at the pickup and ECU), plus removed the appropriate jumper wire on the ECU board, and removed the jumper wire I had connecting the grounds for my weird setup. No change. From looking at the logs it seems that when the coil f...
by theflyingdutchp
Sun Feb 09, 2020 1:10 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

So, I'm back at it again. Trigger seems to sync pretty good when I just use the 4 tooth wheel. I get some errors when I use both (4+24). However, when I enable ignition and shut off the starter motor (so the motor is stopped) the RPM will jump around for a few seconds before settling to zero. Is thi...
by theflyingdutchp
Sun Apr 28, 2019 10:21 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Using 4 stroke w/ cam made no change. However, selecting 'use only rising edge' did... :oops: Tried to fire it up, wouldn't catch. Breaking to eat and get some homework done, then gonna try again tonight. Going to switch over to custom toothed wheel and try to trigger on just the 4 toothed wheel - i...
by theflyingdutchp
Sun Apr 28, 2019 4:34 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

It's definitely not ready for prime time and I am not sure what is the migration plan. At the moment my transition plan is to make everything a https://rusefi.com/s shortcut and some of them go to github already Gotcha. Busy quarter at school for me, as always. Just getting some serious time in the...
by theflyingdutchp
Mon Apr 08, 2019 11:45 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

It has to be on github, wiki has to die one day. So, see https://github.com/rusefi/rusefi_documentation/blob/master/FAQ/HOWTO_Help_rusEfi.md see https://github.com/rusefi/rusefi_documentation/tree/master/Frankenso Copy that. Maybe that could be put in big bright letters at the top of the wiki? :D D...
by theflyingdutchp
Mon Apr 08, 2019 11:25 pm
Forum: You and your build
Topic: Nissan on Frankenso #47
Replies: 192
Views: 137035

Re: Nissan on Frankenso #47

It looks to me like your fuel injection calculator is maybe wrong. .... Am I wrong here? Yes, you never applied the VE %. I believe the formula is there to tell me what the value of the fuel injection should be for a certain settings of the VE table so If I am wrong I can correct it. Why do I have ...
by theflyingdutchp
Mon Apr 08, 2019 7:21 pm
Forum: You and your build
Topic: Nissan on Frankenso #47
Replies: 192
Views: 137035

Re: Nissan on Frankenso #47

filip5 wrote:
Mon Apr 08, 2019 5:59 pm
It looks to me like your fuel injection calculator is maybe wrong.

....

Am I wrong here?
Yes, you never applied the VE %.
by theflyingdutchp
Wed Apr 03, 2019 5:50 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Sorry missed that one, here you are: https://github.com/rusefi/rusefi/commit/969b553d42c6a0c7db9c069e5421685fed84fd23 Thank you! I'm going to try to start it up tonight, I've got a friend coming over to help keep an eye on things. Fingers crossed, failure is expected :lol: I get the feeling that th...
by theflyingdutchp
Mon Apr 01, 2019 6:42 pm
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

russian wrote:
Mon Apr 01, 2019 7:43 am
True. It's a long story :)
Added a comment to reduce confusion at least a bit https://github.com/rusefi/rusefi/commit/5d26b6fdae6baff77a7a8b91dce4ad3d87a5357b
:D Sounds good!

Can you advise on the batched fuel injector software configuration?
by theflyingdutchp
Mon Apr 01, 2019 7:10 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Abricos wrote:
Mon Apr 01, 2019 2:04 am
Do you calibrated TPS in tunerstudio ?
Found it thanks! I must say, its strange that its been put in a different place then all the other similar configs.
by theflyingdutchp
Mon Apr 01, 2019 12:45 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

0. Contribute to RusEFI (does a tiny bit of documentation count for now? :? ) 1. MAP Wiring 2. Get and install TPS 3. First Start 3. a. Injector configuration For the TPS, where do I set the full throttle and idle voltages? I get 88.9% throttle at foot to the floor. 3. b. TPS configuration For batch...
by theflyingdutchp
Thu Mar 21, 2019 2:35 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

How about some fire-breathing snails? And don't forget to add: 0. Contribute to RusEFI Got spark, it hops around a bit but I assume that is due to sync not being perfect while cranking. I'll check again when I've got it running - hopefully it sits nice and stable then. Its going to be at least a wee...
by theflyingdutchp
Wed Mar 20, 2019 3:12 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

...some errors are OK while syncing trigger during cranking, but these are expected to stop appearing once you run.. Good to know thankyou! Do you have a timing gun to confirm your TDC is where red line is? As long as you are confident about timing it's time to crank with fuel and spark :) I do hav...
by theflyingdutchp
Tue Mar 19, 2019 5:45 am
Forum: You and your build
Topic: 88 Toyota Camry 2.0 (3SFE)
Replies: 141
Views: 112636

Re: 88 Toyota Camry 2.0 (3SFE)

Appears to be getting better - still not perfect. 2019-03-18 22_36: EngineState: error: synchronizationPoint @ index 30452 expected 4/24/0 got 4/15223/0 2019-03-18 22_36: EngineState: error: synchronizationPoint @ index 68 expected 4/24/0 got 4/31/0 2019-03-18 22_36: EngineState: error: synchronizat...