Search found 8 matches
- Sat Jan 18, 2014 3:16 pm
- Forum: Misc
- Topic: What chip is inside ford eec*?
- Replies: 28
- Views: 49485
Re: What chip is inside ford eec*?
@russian I am not very familiar with the PPC variants. I'd open up my one PPC based eec-V for a look but Ford likes to put random part numbers on things instead of industry PNs.
- Sat Jan 18, 2014 1:27 am
- Forum: Misc
- Topic: What chip is inside ford eec*?
- Replies: 28
- Views: 49485
Re: What chip is inside ford eec*?
The chips were designed by Ford's Microelectronics group in Colorado with support from Motorola and Intel and were cross sourced from several manufacturers. From the pocket reference "This reference guide is intended for use by engineers and programmers who design, develop, and program 8061 and...
- Sat Jan 18, 2014 1:13 am
- Forum: Misc
- Topic: What chip is inside ford eec*?
- Replies: 28
- Views: 49485
Re: What chip is inside ford eec*?
If you want a moderately accurate description of the systems in the Ford EEC-IV / EEC-V look for ( google ) documents titled similar to: Technical notes on the EEC-IV EEC-Tech-Notes EECTechnical EECIV Inner Workings EEC-EV Pocket Reference The "holy grail" of docs is a Ford pub titled: EEC...
- Sat Jan 18, 2014 12:55 am
- Forum: Misc
- Topic: What chip is inside ford eec*?
- Replies: 28
- Views: 49485
Re: What chip is inside ford eec*?
The Ford EEC-V runs a chip that is somewhat similar to an 8096 from an instruction perspective that includes substantial analog and time base circuits to support ECU duties. The family number is 8065 ( 8061 was in EEC-IV ) and they have bank switched RAM/ROM address space for a 256MB logical space a...
- Mon Jan 06, 2014 5:31 am
- Forum: Dev: Hardware
- Topic: How about other dev boards?
- Replies: 6
- Views: 7197
Re: How about other dev boards?
The F3 has floating point also/ Key Features STM32F303VC Core: ARM®Cortex™-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM) /1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access, DSP instruction and MPU (memory protection unit)...
- Mon Jan 06, 2014 5:24 am
- Forum: Dev: Hardware
- Topic: Interfacing with a LCD/tablet dash
- Replies: 14
- Views: 12875
Re: Interfacing with a LCD/tablet dash
If you can deal with a small dash there is an ST unit wirh LCD
https://my.st.com/st-extranet-web-active/active/en/catalog/tools/PF259090
https://my.st.com/st-extranet-web-active/active/en/catalog/tools/PF259090
- Fri Jan 03, 2014 10:00 pm
- Forum: Dev: Hardware
- Topic: VR + knock module
- Replies: 69
- Views: 172560
Re: VR + knock module
With the VR inputs ( and hall inputs also ) you need to be wary of catching the correct crossing point or the missing tooth will be off by almost 1 tooth. MS manual ref: http://www.msextra.com/doc/ms1extra/MS_Extra_Hardware_Manual_files/missingtoothwaveform_incorrect_682.jpg Maybe a comparator with ...
- Fri Jan 03, 2014 9:43 pm
- Forum: Dev: Hardware
- Topic: How about other dev boards?
- Replies: 6
- Views: 7197
Re: How about other dev boards?
It also seems that in several instances the STM32F3 series is better suited for automotive ( mixed signal ) use than the F4. I know the power of the F4 is tempting but it sure looks like there are more useable features on the F3 and the discovery board is even cheaper. http://www.st.com/web/en/catal...