Search found 21 matches

by NormanAlphaspeed
Fri Feb 15, 2019 2:50 am
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

russian wrote:
Fri Feb 15, 2019 1:57 am
git clone has created a new 'rusefi' folder. You should be somewhere inside the folder to invoke orher git command including git aubmodjlez

cd rusefi
Well that was quite stupid of me lol
Color me burned out.
It is finally working, thanks everyone.

Compiled fine, finally. Thanks everyone!
by NormanAlphaspeed
Fri Feb 15, 2019 1:53 am
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

Nothing yet.
errorrusefi.PNG
errorrusefi.PNG (18.89 KiB) Viewed 1711 times
BTW, there is a . git inside the "rusefi" folder
by NormanAlphaspeed
Thu Feb 14, 2019 3:23 pm
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

Same error
eror3.PNG
eror3.PNG (31.91 KiB) Viewed 1733 times
BTW I haven't deleted any folder or anything. :?:
by NormanAlphaspeed
Thu Feb 14, 2019 7:26 am
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

The link to ChibiOS on your Github takes me to the ChibiOS fork... on your Github, I downloaded that and put it in ChibiOS (and downloaded Contrib and put it there too) and apaprently I'm missing stm32_gpio. This does not sound like the way you are supposed to be using github. I would recommend aga...
by NormanAlphaspeed
Thu Feb 14, 2019 5:49 am
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

**EDIT 2 ** The fix allowed me to start compiling, but I keep failing to compile since I apparently don't have "stm32_gpio.h", which is supposed to be included in the GCC toolchain I think? No, stm32_gpio.h is not part of compiler - I suspect your older? updated? folder has mismatched version of Ch...
by NormanAlphaspeed
Tue Feb 12, 2019 3:45 pm
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

the git submodule update --init does nothing for me, I only get C:\Users\User\Downloads\rusefi-master\firmware>make Invoking "git submodule update --init" Invoked "git submodule update --init" rusefi.mk:7: *** Please run 'make' again. Stop. Over and over. I tried running the command manually and it...
by NormanAlphaspeed
Tue Feb 12, 2019 10:00 am
Forum: Software
Topic: How to compile the firmware
Replies: 86
Views: 27746

Re: How to compile the firmware

the git submodule update --init does nothing for me, I only get C:\Users\User\Downloads\rusefi-master\firmware>make Invoking "git submodule update --init" Invoked "git submodule update --init" rusefi.mk:7: *** Please run 'make' again. Stop. Over and over. I tried running the command manually and it ...
by NormanAlphaspeed
Mon Dec 17, 2018 8:09 am
Forum: Your car & your engine
Topic: 2.0T VW FSI potential test mules.
Replies: 83
Views: 4580

Re: 2.0T VW FSI potential test mules.

Is there any in/output you need more information on? At the moment we are still learning how to collaborate. Can you please start a new thread specifically for _your_ vehicle for us to know _exactly_ what is your test mule? I suspect that for the next few weeks you are soldering Frankenso :) I also...
by NormanAlphaspeed
Wed Dec 12, 2018 7:28 am
Forum: Your car & your engine
Topic: 2.0T VW FSI potential test mules.
Replies: 83
Views: 4580

Re: 2.0T VW FSI potential test mules.

c'mon, rusefiis light years behind bosch interms of models and features. Not even funny to compare. Time to research is more important than money probably. Dp you have time? Get a frankenso and start wiring and evaluating whats missing. I have a Frankenso and I never got around to build it hehe, on...
by NormanAlphaspeed
Tue Dec 11, 2018 8:00 pm
Forum: Your car & your engine
Topic: 2.0T VW FSI potential test mules.
Replies: 83
Views: 4580

Re: 2.0T VW FSI potential test mules.

Hey guys, all the mods I made are in my Github repository, https://github.com/ElDominio

All code that I added to the Speeduino firmware is in alphaMods.h (fan control mostly)
CAN code is in the CAN ME7.5 directory, hope it all helps!
by NormanAlphaspeed
Tue Dec 11, 2018 7:01 am
Forum: Your car & your engine
Topic: 2.0T VW FSI potential test mules.
Replies: 83
Views: 4580

Re: 2.0T VW FSI potential test mules.

I made a PnP Speeduino for an Audi A4 1.8T, I can help with fan control (the Audi used one, idk if other VAG did), CANBUS messages (I am only missing A/C confirmation message), and well VVT is two-stage as far as I know, on and off. If I can help let me know!
by NormanAlphaspeed
Wed Nov 28, 2018 8:25 am
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

heyo, I'm still here hahaha I dwelved a bit deeper, and I'm finally starting to use STM micros in my (our) projects! I'm starting to get my feet wet in STVD, and we're gonna try to make a meth controller that runs on STM8S hehehe I ended up making an ETC controller using an Arduino Nano, works prett...
by NormanAlphaspeed
Mon Feb 06, 2017 9:26 am
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

Heh, I meant a Facebook group like this: https://puu.sh/tQDuh/6d00634e06.png Since we're finished (me and my friend) with getting the SPeeduino to work (which was totally on us, we were stumped with a 3 wire VR sensor on the Accent), we're now going to head into the "make the Pololu work with an Ard...
by NormanAlphaspeed
Fri Feb 03, 2017 3:16 pm
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

russian, if I were to send you a throttle pedal, throttle body and a Pololu driver, would it help development of at least some experimental code? I can find those easily. We finally got our Speeduino running so now the next step is to get the Frankenso board up and running, so we can start to experi...
by NormanAlphaspeed
Tue Jan 24, 2017 7:16 am
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

There must we a way to use Haltech just as ETB to begin with :) Hm, I'd have to make a patch loom for that... I only bought a male connector ahahahaha I already have a Pololu DC Motor Controller (Pololu G2 High-Power Motor Driver 18v17) which should work for this, I was thinking about implementing ...
by NormanAlphaspeed
Tue Jan 24, 2017 2:47 am
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

But what about the ETB? Well, you found your test platform hahaahaha Seriously though, unless I dive in hard into this, I'll forget it. My car runs on a Haltech PNP right now, so I would be swapping between them both as this gets afloat. I'm not a master (not even a medium) programmer, but I hope I...
by NormanAlphaspeed
Mon Jan 23, 2017 3:33 pm
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

@russian, I've decided to use rusEFI on my Genesis Coupe instead of the Accent, so I'll be making a PnP harness for that instead and screwing around with a much newer (and more interesting) car. I've already started reverse engineering the CAN messages for this, and well yeah, it's a test bed for a ...
by NormanAlphaspeed
Sun Jan 15, 2017 12:00 am
Forum: Software
Topic: electronic throttle body control ETB
Replies: 263
Views: 22512

Re: electronic throttle body control ETB

Here come my not-very-heavy 2 cents: have aHyundai Genesis Coupe with an EThrottle from the factory, where I'm running a certain afterrmarket company's PnP product for it. From my personal experience, the best way to get things working at last somewhat is implementing it, and basically every car has...
by NormanAlphaspeed
Sat Jan 14, 2017 4:30 am
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

Did you say you are starting with a 95 Hyundai Accent? Do you know if position sensors are VR or Hall? Do you know anything about trigger pattern shape? Pretty sure it is dual VR, 60-2, half tooth on cam. I'm starting with the Accent, but I'm sure this processor can handle more advanced cars like m...
by NormanAlphaspeed
Fri Jan 13, 2017 4:18 pm
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Re: Hello from Puerto Rico! Hope to do some good!

We have this test bench with the external PSU, but we'll get working on it whn we get it!!! heehehehe
by NormanAlphaspeed
Fri Jan 13, 2017 7:31 am
Forum: Hello World
Topic: Hello from Puerto Rico! Hope to do some good!
Replies: 16
Views: 2199

Hello from Puerto Rico! Hope to do some good!

Hey guys! I'm Norman from PR, I currently run my own "business" of tuning cars locally and abroad. I'm also currently studying Computer Engineering at a local university, and I'm developing a version of the Speeduino with a friend. I saw this project and saw how more more capable the ST microprocess...