Search found 110 matches
- Wed Jun 03, 2020 3:47 pm
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Re: Sparkle Green Supercharged 05 Miata
Before I threw the Board in my car. I wanted to double check the wiki, as I have a few mods on my car. I need to control/monitor the following things. VICS solenoid - requires a lowside driver capable of driving a solenoid. Oil temp- NTC IAT 2 - NTC: Used for monitoring Intercooler efficiency. Purel...
- Wed May 20, 2020 12:25 pm
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Re: Sparkle Green Supercharged 05 Miata
Looking at the boost level, I must be leaking, or slipping my belt. Feels good though.
Dual TBs ended up being the answer.
Dual TBs ended up being the answer.
- Tue May 19, 2020 7:21 pm
- Forum: You and your build
- Topic: red 2003 VVT test mule Miata NB2 #27
- Replies: 240
- Views: 388617
Re: red 2003 VVT test mule Miata NB2 #27
Ha, there is a crazy idea to actually drive that EGR solenoid since we have outputs! That would be low side pin 3D. What's the failure mode of the EGR solenoid? Closed? I have all the solenoids and other emission junk in one pile, so I've no idea which one is which anymore... My concern would be if...
- Sun May 17, 2020 10:53 pm
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Re: Sparkle Green Supercharged 05 Miata
Maybe someone can chime in here that has done this. Faux dual TBs. I’m going to have a “dummy” TB with no butterfly on the IM. The TB with the butterfly will be pre supercharger. The pre supercharger TB will also have the idle valve. From what I’m reading, the idle issues can be tuned out. However, ...
- Sun May 17, 2020 7:16 pm
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Re: Sparkle Green Supercharged 05 Miata
Nice setup. Do you have any VD pulls? There's a guy near me who keeps supercharging NA Miatas (and subsequently blowing them up) and the torque curves he gets are just hilarious. I appreciate the fact that you think it’s running! Unfortunately it’s still a couple days from completion. Still needs a...
- Sun May 17, 2020 1:48 am
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Re: Sparkle Green Supercharged 05 Miata
Feature request. Currently my MS3Pro has SD logging. It can be enabled by a software condition (rpm > 2000), always, or a hardware input. The way I have it set up, I have a switch between the ecu and ground. When it is pushed it toggles SD logging. In addition, I have an indicator light that’s drive...
- Sun May 17, 2020 1:39 am
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Re: Sparkle Green Supercharged 05 Miata
I want to ensure that I can keep some IO that my current ECU can do. I have the additional IAT, and oil temp. But also a switch to trigger on SD logging, and an output to drive an LED that indicates whether or not SD logging is active. I guess that’s asking for 2 more analogs, 1 digital in, and 1 lo...
- Sun May 17, 2020 1:32 am
- Forum: You and your build
- Topic: Sparkle Green Supercharged 05 Miata
- Replies: 7
- Views: 6293
Sparkle Green Supercharged 05 Miata
Second time running RusEFI. First time was a Frankenso with a 2000 Miata. Excited to be running the new PnP unit! Car is currently running a MS3Pro PnP. Car is being used for autocross. It’s getting an M45 supercharger from a Mini Cooper. There’s a decent amount of wiring IO I’ve done. I removed all...
- Thu Apr 18, 2019 5:30 pm
- Forum: You and your build
- Topic: 1990 Toyota Celica 4AFE
- Replies: 1
- Views: 3064
1990 Toyota Celica 4AFE
Hi everyone, I recently purchased a 90 Celica. It has no interior save for the seats and dash. Currently its running off a Speeduino ECU (UA4C board). I have a RusEFI lying around still (Miata has taken a different path unfortunately), and it's connector and case is perfect for the Celica. The Celic...
- Sun Nov 25, 2018 8:09 pm
- Forum: Dev: Software
- Topic: 20x4 LCD usefulness ideas?
- Replies: 15
- Views: 12250
Re: 20x4 LCD usefulness ideas?
Ever heard of the Nextion displays? They’re cheap touchscreen displays. Would add more usefulness!
- Mon Nov 12, 2018 7:33 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
Managed to get Bluetooth working. Simple as getting an Hc-05 module on Amazon, programming it as slave, 115200 baud, and it connected the first time through TS. I ran the cables out through one of the screw holes to the module which is velcro’d to the case.
- Sat Nov 10, 2018 6:50 pm
- Forum: Dev: Hardware
- Topic: GPS
- Replies: 1
- Views: 2384
GPS
How does GPS work? I have a Neo8m module that I use for my bike GPS (M5 Stack as MCU), it has serial output as well. What will happen if I hook up the appropriate serial pins? Will something in TS log my GPS speed? Or is it logged to the SD card only?
- Thu Nov 01, 2018 11:42 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
There was sort of a version of that on the wiki page here https://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenso_board However yours is much nicer to work with. I'm aware of that one. I just wanted something with colors and a more general description. Also it being in the format of Googl...
- Fri Oct 19, 2018 2:00 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
- Sun Oct 14, 2018 10:51 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
- Thu Oct 04, 2018 1:26 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
https://docs.google.com/drawings/d/1r4goeiJiMLPtiDx9DByHEvvtKY0L24yskllQM9WLbN0/edit?usp=sharing Btw when I meant by "default 64 pin connector pinout" I meant something like this. Displays the pins, their wxx, function and STM pin. I'll finish this up as the week goes on. Please give me yo...
- Tue Oct 02, 2018 11:08 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
So, in TS I burned a baud rate of 150000 because TS has it as an option...Now my RusEFI doesn't seem to connect anywhere. Any ideas? I re-burned the hex to the STM32. Let's see if that defaulted it. Worked. So basically changing any of the baud rates in TS bricks the RusEFI. So to change the TS baud...
- Tue Oct 02, 2018 5:06 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
Is all the info on the FSIO wiki page current? Trying to build FSIO for AC. Basically the ECU receives a digital input for the AC switch, ECU pulls AC fan and clutch relays to ground.
- Sun Sep 30, 2018 10:33 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
Is your Vehicle Speed Sensor (VSS) hall, VR, other? Also how is your CAM and CRANK signals obtained? Is CAM and CRANK hall, VR, or other? VSS is an AC generator which gets conditioned by the gauge cluster into a 5V signal from what I've read. Yeah it just a VR sensor. The cluster must do something ...
- Sun Sep 30, 2018 7:32 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
I think key guide lines for Bluetooth are -- A plastic case, as metal blocks RF -- You got it working with the USB FTDI first, such that you know it works -- Bluetooth capable laptop or an bluetooth capable andorid phone. -- Bluetooth on a PC, see this video for how the HC-0# shows up as a com port...
- Sat Sep 29, 2018 4:27 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
Your description of the fan, with one side of the fan connected to the + of the battery, with a switch on the low side, sounds about correct. However the fan usually draws quite allot of amps. The injector drivers can drive 1A with no problem, and could potentially drive more. However your fan may ...
- Thu Sep 27, 2018 2:47 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
The big thing is that as you can see in the below, it's designed such that you commonly have 0 ohm jumpers, like those little wires on the left of the picture. However you can reconfigure the pin out with some jumper wires similar to the little yellow wire. Notice the 0 ohm jumpers are not installe...
- Wed Sep 26, 2018 2:32 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
The entire point of the WXX jumpers like W1 to W22 is that you can remap the ECU's pin out. For example, IN6 is connected to W50. If you have an existing circuit or if you added a wire to say harness connector 3R, you would install a short jumper wire between the Harness side of W56, and the PCB si...
- Sun Sep 23, 2018 4:35 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
If you are trying to sense a switch, you would connect it to the input circuit, not the output circuit. See page 3 of the schematic. I don't know your existing wiring, but if you simply have the dry contacts of the switch, you could use input 8, which includes a 5V pull up resistor. Such that when ...
- Fri Sep 07, 2018 12:13 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
- Fri Sep 07, 2018 12:01 am
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
Awesome, I just wanted to make sure I wasn't making some grounds too noisy.
For the clutch switch, since its normally open, I should be using a high side driver?
Going off this
For the clutch switch, since its normally open, I should be using a high side driver?
Going off this
- Thu Sep 06, 2018 10:25 pm
- Forum: You and your build
- Topic: 2005 Nordic Fjord Pine Tree Green MIATA
- Replies: 60
- Views: 38286
Re: 2005 Nordic Fjord Pine Tree Green MIATA
Before I get ahead of myself I just want to confirm grounding.
W39 - injector ground
W40 - output ground/MAP sensor/Wideband ground
W41 - ECU ground
W42 - Sensor ground
W39 - injector ground
W40 - output ground/MAP sensor/Wideband ground
W41 - ECU ground
W42 - Sensor ground
- Tue Sep 04, 2018 11:18 pm
- Forum: Misc
- Topic: assistants for assembly PCB
- Replies: 5
- Views: 5036
Re: assistants for assembly PCB
Maybe I'll finally get around to putting my kit together now with this!
- Tue Sep 04, 2018 11:15 pm
- Forum: You and your build
- Topic: 2004 Mazda MX-5 1.8 VVT Frankenso project
- Replies: 32
- Views: 19004
Re: 2004 Mazda MX-5 1.8 VVT Frankenso project
Hi all ! Thank you for your replies :D I will reconsider the option of ordering the pre assembled board as soon as I will have my all my taxes paid ;) So you ordered a complete board with the 64 pin connector and made an adapter with the 72 pins boards and a Honda OBD 1 connector ? Your MAP sensor ...
- Mon Sep 03, 2018 10:32 pm
- Forum: You and your build
- Topic: 2004 Mazda MX-5 1.8 VVT Frankenso project
- Replies: 32
- Views: 19004
Re: 2004 Mazda MX-5 1.8 VVT Frankenso project
Dollar store glasses repair screwdriver is a great depinning tool. I just got a set of depinning tools. They look like keys, and come on a keyring. They were like 10$ on Amazon. https://www.ebay.com/itm/11pcs-CAR-Terminal-Removal-Tool-Kit-Wiring-Connector-Pin-Release-Extractor-Pulle/163214670046?ep...