As practice has shown, I wasn't far from the destination point
This topic will probably be never updated, so, go here to keep in touch
https://rusefi.com/forum/viewtopic.php?f=18&t=1584&start=30
Search found 66 matches
- Sun Feb 13, 2022 1:45 am
- Forum: Dev: Software
- Topic: Kickstart mode
- Replies: 1
- Views: 2969
- Sun Feb 13, 2022 1:42 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hello everyone! I've benn riding my motorcycle for one year with RusEFI. A lot of things which are now able with EFI and ETB's made my riding more enjoyable. But the most important thing was a really weak point: starting/cranking. Due to the RusEFI scheduler's architecture and kicktart cranking feat...
- Wed Nov 24, 2021 10:04 pm
- Forum: Dev: Software
- Topic: Kickstart mode
- Replies: 1
- Views: 2969
Kickstart mode
Hello everybody! Since Slack channels are not the best way to discuss some new things as I've been thinking for a long time, I decided to try the Forum... My engine runs on the RusEFI and feels good. Check this: https://rusefi.com/forum/viewtopic.php?f=18&t=1584 Everything works properly except ...
- Thu Jul 22, 2021 11:56 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hello everyone! My Ural has already passed about 350 kilometers with RusEFI! I'm playing with settings, coils, sensors and other stuff, but today I installed very rare exhaust pipe which I've been trying to found for about six years! I'm waiting for your advices about cranking settings and other thi...
- Sun Jun 06, 2021 1:19 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hi everyone! Today I had my first EFI riding!!!! https://youtu.be/ncTaY0Eyqc0 2 ETBs 2 WBOs A hall sensor as a CAM position sensor But not everything was so good and after a half of an hour riding I had to push my motorcycle back to the garage (thankfully, it wasn't far away) I was riding with an au...
- Mon May 17, 2021 10:44 pm
- Forum: Misc
- Topic: Arduino help wanted !!!
- Replies: 5
- Views: 6601
Re: Arduino help wanted !!!
I rewrote the code and made it like-multitask. Now you can just change the x, y, z values in the end of the Setup function and you'll have what you need. If you need a really hard timing, just put the x, y, z values little less than you need (because data transfering also requires some time). Also n...
- Mon May 17, 2021 4:47 pm
- Forum: Misc
- Topic: Arduino help wanted !!!
- Replies: 5
- Views: 6601
Re: Arduino help wanted !!!
Also I added one function which I didn't finished and just commented. This function decides which delay it needs to use in each case. Now if you need a hard time operation, you will not have it. For example, if you put delays like this: 100, 100, 120, your controller will send the first message, sle...
- Mon May 17, 2021 4:42 pm
- Forum: Misc
- Topic: Arduino help wanted !!!
- Replies: 5
- Views: 6601
Re: Arduino help wanted !!!
Hello! As I understood, you can use this: #include <SPI.h> #include <mcp2515.h> struct can_frame canMsg1; struct can_frame canMsg2; MCP2515 mcp2515(10); volatile bool but1, but2, but3; volatile int x, y, z; void setup() { canMsg1.can_id = 0x167; canMsg1.can_dlc = 8; canMsg1.data[0] = 0x81; canMsg1.d...
- Fri May 14, 2021 1:21 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Good news! Today I managed to start my engine!!! TWO ETBs. TWO WBOs and it works!!!!! My problem was in a bad battery, which was falling down to 5.5 volts when I started the engine even though it had 12 volts when ignition was turned off I connected another battery and engine started WITH EFI!! WITH...
- Tue May 04, 2021 7:30 pm
- Forum: Tuning Support: Making it Run
- Topic: RusEFI wideband controller. Making it run
- Replies: 1
- Views: 3533
Re: RusEFI wideband controller. Making it run
I made it work
Just was needed to put "true" in Enable AEM X-Series CANbus
Just was needed to put "true" in Enable AEM X-Series CANbus
- Tue May 04, 2021 5:52 pm
- Forum: Tuning Support: Making it Run
- Topic: RusEFI wideband controller. Making it run
- Replies: 1
- Views: 3533
RusEFI wideband controller. Making it run
Hi! I ordered RusEFI WBO controllers on JLCPCB, programed them, connected one of them to an LSU 4.9.,to +12v and to my Frankenso. Everything was great, sensor was pre-heated by the controller and green LED showed me that everything is OK by slow blinking. But my AFR gauge in the TS shows 0... As I k...
- Sun May 02, 2021 12:50 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
My butterfly didn't handle dependability tests... It collapsed on a highway in 35 kilometers far from home... The butterfly's mileage at the moment of the collapse was 140 km... The engine stopped at the one moment and I found out that I was on the highway at 11 PM alone... Thanks a lot to one guy w...
- Sat May 01, 2021 11:58 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Thank you!
I tried the latest nightly version of the software today
Works great!
I tried the latest nightly version of the software today
Works great!
- Sat May 01, 2021 11:57 pm
- Forum: Dev: Hardware
- Topic: Possible option for generating VR sensor signals
- Replies: 24
- Views: 23004
Re: Possible option for generating VR sensor signals
I play with an MCP4922 just for fun. If we just put one gate of a DAC to transformer, the gate will be shorted to GND and we'll se nothing on the secondary coil of transformer. But if we put a capacitor between the transformer and the DAC, everything will great (we'll receive a signal on the seconda...
- Sat May 01, 2021 12:49 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
The TS already gives me this (check the video)
Isn't it enough?
Isn't it enough?
- Sat May 01, 2021 12:46 am
- Forum: Universal Boards
- Topic: What does startup pin state error mean
- Replies: 4
- Views: 4761
Re: What does XXX error mean
Ok, thank you!
But why don't I have this message with previous versions of the software?
For example, posted in December, 18, 2021?
And how to fix this error?
But why don't I have this message with previous versions of the software?
For example, posted in December, 18, 2021?
And how to fix this error?
- Sat May 01, 2021 12:42 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Today I did some "endurance" tests. First, I used the software version released on March, 10, 2021. I had big troubles with engine start (if my engine didn't start after the second kick, the red LED on my Frankenso turned on and the Frankenso didn't do sparks at all 'till I restart the CPU...
- Sat May 01, 2021 12:37 am
- Forum: Universal Boards
- Topic: What does startup pin state error mean
- Replies: 4
- Views: 4761
What does startup pin state error mean
Hello, guys!
Please, tell me, what it means?
What's wrong?
Here is the tune:
https://rusefi.com/online/view.php?msq=496
I have this error with versions of the software released after mach, 10, 2021
Please, tell me, what it means?
What's wrong?
Here is the tune:
https://rusefi.com/online/view.php?msq=496
I have this error with versions of the software released after mach, 10, 2021
- Tue Apr 20, 2021 10:06 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Thank you!)
I posted the tune https://rusefi.com/online/view.php?msq=492
The wheel is set up on a camshaft and has two teeth. Each tooth is 90 degrees. With a hall sensor it starts and works good.
I posted the tune https://rusefi.com/online/view.php?msq=492
The wheel is set up on a camshaft and has two teeth. Each tooth is 90 degrees. With a hall sensor it starts and works good.
- Sat Apr 10, 2021 10:51 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hi guys!
I finally can start my engine by the Frankenso!
It starts after the first or second kick
If it doesn't, my chances decrease after each kick, so I just restart the ignition and start kicking again.
Check the video
I finally can start my engine by the Frankenso!
It starts after the first or second kick
If it doesn't, my chances decrease after each kick, so I just restart the ignition and start kicking again.
Check the video
- Mon Mar 22, 2021 9:31 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
My attempts with the VR sensor and the 4-1 wheel:
- Mon Mar 22, 2021 9:31 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
My attempts with the VR sensor and the 2-0 wheel:
- Mon Mar 22, 2021 9:30 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
2-0 with the hall sensor after I connected the signal wire to the analog input and managed to control the engine:
- Mon Mar 22, 2021 9:29 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Also here are my logs and tunes:
2-0 with hall sensor before I connected the signal wire to the analog input pin
2-0 with hall sensor before I connected the signal wire to the analog input pin
- Mon Mar 22, 2021 9:27 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hello guys! Today I did: A stroboscope based on LED Managed to set the trigger angle advance allowed me to control the engine. The system works very bad but the engine can work at least Managed to did the same with the VR sensor Remember the rocks on the RPM sniffer? I was right, I had noises on the...
- Thu Mar 18, 2021 8:28 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hello! I've used settings you suggested. It didn't help. Matthew suggested put "double 9-1" trigger wheel on the camshaft and set "4 stroke without cam" and put 9-1 wheel in settings. I did it. I've just posted my current tune, you can check. And today's log is also here. But yes...
- Fri Sep 25, 2020 4:09 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hello! Yesterday I added second channels to both ETBs and here is my actual problem in the video....
Also, here is my little progress with ignition system
Also, here is my little progress with ignition system
- Mon Sep 14, 2020 12:02 am
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
- Fri Sep 11, 2020 3:21 pm
- Forum: Dev: Hardware
- Topic: DEAD DESIGN rusEfi own wide band controller board add-on using CJ125
- Replies: 364
- Views: 339733
Re: rusEfi own wide band controller board add-on using CJ125
Hello everyone! I've got some issues with my CJ125 board with square chip: The fist one, which I noticed is when i attach +5v to +5v pin, LEDs on +5v and +12 lines do light. If I connect +12v to +12 pin, i can see, that just +12V led is lighting. I checked PCB for short circuit and didn't find it. W...
- Fri Sep 11, 2020 3:11 pm
- Forum: Universal Boards
- Topic: Old Russian motorcycle fuel injection
- Replies: 57
- Views: 71546
Re: Old Russian motorcycle fuel injection
Hi everyone!
So, today my progress is:
1. I casted aluminium injection channels, they're waiting for machining now
2. I've got two working ETB's
3. Still have problems with CJ125&LSU 4.9.... I'll make a post in the CJ125's thread
So, today my progress is:
1. I casted aluminium injection channels, they're waiting for machining now
2. I've got two working ETB's
3. Still have problems with CJ125&LSU 4.9.... I'll make a post in the CJ125's thread