rusefi.com

Hi! Replied in Slack to continue discussion...

Hm. Ok. We are going with 72V then. So only thing to sort is I need 6 injectors. I need to check again when I get home, but I think I saw one injector channel is currently a spare in the original board (Gate 5? Don't remember now). And I think I can drop the pump control circuit since I only need a ...

Right! After some attempts I think I got it working ok (by ok I mean no symbols show the "?" and no errors come up when saving or opening at least the MC33816 schematic and PCB): - Downloaded .zip from https://github.com/rusefi/kicad-libraries into user/Documents/KiCAD - Follow this tutori...

So, I'd be looking to order the board any time. The thing is I'd like to take the best possible first attempt with regards to my project, so, I'm thinking a 100V peak compatible board (not sure what is the rating of the parts on your board at the moment...) plus the 2 * 3 inj/bank thing... Bear with...

I'm sorry work has been crazy as we have an important build to deliver, I haven't had much time for anything else! Yes I would be interested in building the dev board which I can hopefully do it at home using my "electronics oven". I've built a few boards before and they turned out ok so I...

Right, I think I see my chance to actually contribute with something for the project! What if I get 6x this (I've seen this cheaper somewhere else...): http://www.starsdiesel.net/common-rail-injector-solenoid-valve-assembly-f00vc30318_p12899.html and your PT2000 "dev" board? With this be a...

Right, from what I've read so far, we are not expecting voltages as high as 300V for a solenoid type injector (piezo injector is more likely). At least I hope not! I finally had some time to read the OEM driver datasheet as well as the PT2000 datasheet. It seems the OEM setup would be something simi...

So here is the progress regarding the injectors: - Mercedes PN: A 613 070 05 87: http://mbepc.net/1/m/om613/65c/613960/0/07/105 - Bosch PN: 0 986 435 063 - OEM driver chip is Bosch 30421, or CY220: http://www1.futureelectronics.com/doc/BOSCH/0272230421.pdf I am struggling to find a voltage rating......

Hi again and thanks all for the replies! Here: Welcome to the candy shop ... viewtopic.php?f=2&t=1393&hilit=Noxz&start=180 Yes that's the thread I mean to follow. It seems to be the one who's getting injectors clicking sooner! :) Probably too early for diesel section since so little dies...

Hi all! Project is: buggyPhoto.jpg Built from scratch by my friend in his garage... This is a Mercedes OM613 engine, which is a straight-six, common rail, solenoid injector diesel: https://en.wikipedia.org/wiki/Mercedes-Benz_OM613_engine It is currently running of the original ECU (Bosch EDC15) with...