rusefi.com

My girlfriend drives a Nissan Versa. By that, I mean that I take apart her Versa for fun.

It has a 1.8 liter MR18DE. Double overhead cam, single...

Hello

I have a bmw 325is that I am working to convert from the speeduino OS on its stm32 board to rusefi

created by user:

Car is...

First universal board in Hellen One family source code & user documentation

I have a BMW M50B20
60/2 crank trigger
1 cam trigger
Injection set in Tuner Studio and wired as Sequential
Coils set in Tuner Studio wired as...

Central thread for IsoTp ISO 15765-2 in rusEFI

On the one hand we have 15765-2 implementation in firmware and ELM327/15765-2 console TS proxy, on...

Hello,
I'm planning to start my early production (December 1987) M70 with the magnificent Proteus, but unlike the 134 pin connector from the M73, my...

As the title states, my TPS ADC value when the throttle is closed changes everytime I start the car after having it sit for a few hours. The...

Hello, i have weird trigger issue, i can start engine but after one second engine stalls trigger error and RPM shows as 0 when still cranking, but...

Ed has a 99 NA daily and a 2001 turbo.

I am pretty sure that Ed would allow me to touch his 99 NA daily.

Do we know _anything_ about 99 NA ECU? Do...

I will be borrowing a white miata just to go visit a dyno and show off.

has pointed me at and we shall figure out the official part number of both...

Since we have Hellen121VAG sounds like next step would be to make some VAG gearboxes happy via CAN?

This is an introduction as well as a request for help. I have a supercharged 95 (four pin coils) Miata with a lightweight flywheel that was using a...

Hey people,
It's nice joining this team. Looking forward to a fine experience.

Regards,
Sigrid.

Just bought a pnp kit from Beermoney. So, I guess its time to be a member and such.
The car is nearly a street car and a clean slate for anything...

I used rusefi plate throttle with stepper motor on the motorcycle, and set the stepper motor function Dan on the debugging software. The motor can...

I wanted a gauge on my car that had several parameters on it and interfaced directly to the ECU. The easiest way I thought to achieve this was to buy...

My secret projects. Maybe will work with Ford 5.0 hellen?

ECU pinout

image.png

Hello fellow car enthusiasts. This is my 91' Mercedes Benz 2.3 auto, and this is my 3rd attempt at finishing this specific project for the first...