Search found 336 matches

by 960
Fri Jul 26, 2019 1:00 pm
Forum: Dev: Hardware
Topic: microRusEFI
Replies: 388
Views: 516498

Re: microRusEfi

Can you find resistor for pin Key and measure? I am in car without diagram. But this means gate voltage for prereg missing?

Also measure the other resistors at 8888 that shows 12v in diagram
by 960
Fri Jul 26, 2019 11:32 am
Forum: Dev: Hardware
Topic: microRusEFI
Replies: 388
Views: 516498

Re: microRusEfi

As above, measuring those things are first step. However, the 8888 and the power supply components are REALLY hard to kill. I dont know how this is soldered and checked? Did you have it under a good microscope? Also, measure both sides of resistors at Key pin And, does the prereg or 8888 produce any...
by 960
Fri Jul 19, 2019 9:31 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

And I made it for the sensors :-)

[The extension ini has been deactivated and can no longer be displayed.]

[The extension ini has been deactivated and can no longer be displayed.]

EKWwx5IrWH.png
EKWwx5IrWH.png (304.7 KiB) Viewed 14045 times
by 960
Fri Jul 19, 2019 7:50 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

I would also like to add presets for ETB's, so the part-numbers/type can be in a drop down. If someone could make a initial preset would be great. (I dont know how) I would also like to add presets for injectors and sensors, as I have pages of values for anything possible. If someone could show me, ...
by 960
Fri Jul 19, 2019 7:42 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

Abricos wrote:
Fri Jul 19, 2019 5:09 pm
Yes it's really cool EBT calibration set up ...
Thanks!

Trying to simplify a little, it can be confusing :-)

Have you tried the .ini file?
by 960
Fri Jul 19, 2019 6:11 pm
Forum: Dev: Hardware
Topic: DEAD DESIGN rusEfi own wide band controller board add-on using CJ125
Replies: 364
Views: 329286

Re: rusEfi own wide band controller board add-on using CJ125

I can do that next time I test it in car.

This is the gauges showing something at bench(No sensor connected).
javaw_DbRXHfQ8RF.png
javaw_DbRXHfQ8RF.png (550.11 KiB) Viewed 29894 times
by 960
Fri Jul 19, 2019 4:02 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

A little more cleanup and changes. Scaled the factoring to be % for corrections. (% Of normal fueling) When connecting to board with this .ini, choose "use controller settings". (Actually % of cranking base fuel pulse width for some of them, dont know how to change) Started some rearrangin...
by 960
Thu Jul 11, 2019 11:41 am
Forum: Dev: Software
Topic: VVT support for mote than one trigger tooth?
Replies: 9
Views: 7758

Re: VVT support for mote than one trigger tooth?

This should be the right values I think
chrome_wN8HLcZjOF.png
chrome_wN8HLcZjOF.png (410.65 KiB) Viewed 7692 times
http://files.s4wiki.com/docs/Audi_R4-5V_T_132kW_ME7.pdf

Page 798.

Searched: Nockenwellen
by 960
Thu Jul 11, 2019 11:20 am
Forum: Dev: Software
Topic: VVT support for mote than one trigger tooth?
Replies: 9
Views: 7758

Re: VVT support for mote than one trigger tooth?

It's hall.

It shows the same signal, I think the bottom one are another cam position?
by 960
Thu Jul 11, 2019 3:09 am
Forum: Dev: Software
Topic: electronic throttle body control ETB
Replies: 290
Views: 351422

Re: electronic throttle body control ETB

You need to connect Dir1 and dir2 to MCU.

Select pins in TS, and use the settings in menu

Set Dis pin Low with resistor, En pin high with resistor.


You can find my schematic for it in microrusefi folder
by 960
Thu Jul 11, 2019 2:38 am
Forum: Dev: Software
Topic: launch control
Replies: 100
Views: 98463

Re: launch control

The most "important" part are to generate boost.

If you can implement ALS as well would be great.

Now with E-Throttle we dont need bypass-solenoid anymore.


One of my old air bypass setups :-)
DSC_0018.JPG
DSC_0018.JPG (2.1 MiB) Viewed 27660 times
by 960
Thu Jul 11, 2019 1:33 am
Forum: Dev: Software
Topic: electronic throttle body control ETB
Replies: 290
Views: 351422

Re: electronic throttle body control ETB

Abricos wrote:
Thu Jul 11, 2019 1:22 am
so where we stopped gentlemens ?
which chip or PCB need to use ?
TLE7209 or VNH2SP30 ?
It actually works quite good now.

I use TLE7209, but I think there are support for others like TLE9201SG.
by 960
Thu Jul 11, 2019 1:30 am
Forum: Dev: Software
Topic: VVT support for mote than one trigger tooth?
Replies: 9
Views: 7758

Re: VVT support for mote than one trigger tooth?

I have VVT at the intake only.

I'll see if I find a image.

It should generate something like this:
AcroRd32_E6GE0ovEvd.png
AcroRd32_E6GE0ovEvd.png (360.25 KiB) Viewed 7705 times
by 960
Wed Jul 10, 2019 10:16 pm
Forum: Dev: Software
Topic: VVT support for mote than one trigger tooth?
Replies: 9
Views: 7758

VVT support for mote than one trigger tooth?

I have a cam trigger wheel with 4 teeth. 2 short and two long.

Do you have any support for it?

I have all the data/angles etc. I think.
by 960
Wed Jul 10, 2019 6:58 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

Today we also got support for 1d arrays in TS.

This is very useful when tuning cold start, and work with several arrays at the same time.
8PTmFUZsAk.png
8PTmFUZsAk.png (376.45 KiB) Viewed 14114 times
by 960
Wed Jul 10, 2019 1:44 pm
Forum: Dev: Hardware
Topic: DEAD DESIGN rusEfi own wide band controller board add-on using CJ125
Replies: 364
Views: 329286

Re: rusEfi own wide band controller board add-on using CJ125

Ok, didnt know. Haven't had any reaction at that gauge yet.

I'll have another look.
by 960
Tue Jul 09, 2019 11:55 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

A new .ini with a little more fixes and more added. (Accel Enrichments + Spark Edge) EDIT: I have been uploading the file with Pin-mapping. This would be the right ones: rusefi.ini rusefi_frankenso.ini Can someone change the ignition pin mode to Falling and Rising in firmware? (Instead of default, d...
by 960
Tue Jul 09, 2019 10:40 pm
Forum: Dev: Hardware
Topic: DEAD DESIGN rusEfi own wide band controller board add-on using CJ125
Replies: 364
Views: 329286

Re: rusEfi own wide band controller board add-on using CJ125

Are there any gauge in TS to show AFR from CJ125, or how do you do that?

I have a CJ125 up and running, but no way to show it at a gauge.

Btw, I spotted this today while making a tuningfile for a Ford Focus.
It has a lot of CJ125 settings.

ols_32on32_x0UjFkZUgJ.png
ols_32on32_x0UjFkZUgJ.png (437.08 KiB) Viewed 30004 times
by 960
Tue Jul 09, 2019 3:06 am
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

and how to use it ??? need instruction how to used where to add this file (rusefi_refactored.ini) ??? when to add this is a file ??? Just go to File, Vehicle Projects, Project properties and select the .ini file. Or you can create new project, and load this ini instead of the .ini you normally use....
by 960
Mon Jul 08, 2019 3:39 pm
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

I have also made some different dashboard layouts I will post here.

I am currently trying to add presets for all the most common sensors + injectors.


Here are a typical dash for tuning
Tuning.zip
(263.85 KiB) Downloaded 452 times
javaw_pcSR8mYyvI.png
javaw_pcSR8mYyvI.png (713.54 KiB) Viewed 14189 times
uO04MrwTqe.png
uO04MrwTqe.png (622.2 KiB) Viewed 14189 times
by 960
Mon Jul 08, 2019 5:17 am
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Re: Tunerstudio Refactoring

Good!

Gp-pwm maps are among the most needed additions for this to be complete.

I have a new .ini file with more added and fully working.

Also waiting for TS to add the 1d array support to replace the curves.

[The extension ini has been deactivated and can no longer be displayed.]

by 960
Sat Jul 06, 2019 11:27 am
Forum: Dev: Software
Topic: Tunerstudio Refactoring
Replies: 16
Views: 14325

Tunerstudio Refactoring

I am working at a TS refactoring, and have a .ini file here if anyone will try it out. It's far from finished, as some firmware additions/changes are required Any feedback welcome. 1.07 rusefi.ini rusefi_frankenso.ini All menus are cleaned up and grouped more rational javaw_sgQoXMie6m.png javaw_h5vu...
by 960
Sun May 26, 2019 9:38 pm
Forum: Dev: Hardware
Topic: Manhattan: TLE8888 breakout board
Replies: 34
Views: 25463

Re: TLE8888 breakout board

Great!! :-)

Have you tested them?
by 960
Sat May 25, 2019 1:54 pm
Forum: Dev: Hardware
Topic: analog inputs: op-amp + divider - Russian - now MCP6004
Replies: 124
Views: 134709

Re: analog inputs: op-amp + divider - Russian - now MCP6004

I am updating the module with the right symbols now. This is just another example of what issues the hated rusefi lib does. I even used a micro usb symbol with d+ and d- switched. It's at the uart on the boards you got from me. It took me a long time to figure out.. So please follow my advice to mak...
by 960
Sat May 25, 2019 1:34 pm
Forum: Dev: Hardware
Topic: analog inputs: op-amp + divider - Russian - now MCP6004
Replies: 124
Views: 134709

Re: analog inputs: op-amp + divider - Russian - now MCP6004

Please note all diodes needs to be soldered different. I used the frankeso symbol that has wrong pinout :-(
by 960
Sun May 19, 2019 3:03 am
Forum: Dev: Hardware
Topic: microRusEFI
Replies: 388
Views: 516498

Re: microRusEfi

MicroRusefi.jpg
MicroRusefi.jpg (101.68 KiB) Viewed 30221 times
by 960
Wed May 08, 2019 4:25 pm
Forum: Dev: Hardware
Topic: microRusEFI
Replies: 388
Views: 516498

Re: microRusEfi

I think this is close to the shape ?

(No components are placed or routed)

MicroRusefi.jpg
MicroRusefi.jpg (102.24 KiB) Viewed 30381 times
by 960
Wed May 08, 2019 3:43 pm
Forum: Dev: Hardware
Topic: Common Rail MC33816/PT2001 dev board - 4 injectors GDI
Replies: 137
Views: 166948

Re: Common Rail MC33816 dev board - 4 injectors

Bom from the original board shows SRP1245A-100M, so that sounds close enough
by 960
Wed May 08, 2019 3:18 pm
Forum: Dev: Hardware
Topic: GDI: injector control options
Replies: 19
Views: 22695

Re: GDI: injector control options

That's what I consider the same.

I see no reason to waste time at the MC33816, as the PT2000 are both newer and better with 6 cylinders.

I am also sure the MC33816 are soon to die out anyway.