rusefi.com

are we talking about this connector? http://my.rs-online.com/web/p/pcb-connector-housings/7200976/?searchTerm=178764-1&relevancy-data=636F3D3126696E3D4931384E4B6E6F776E41734D504E266C753D656E266D6D3D6D61746368616C6C7061727469616C26706D3D5E285C642B5B2D5C2E5C732F5D292B285C642B293F247C5E5C642B242670...

The relay you have installed is the correct relay for your application. You just need to wire it the way I described in the earlier post. Don't change to a 5V relay! It's not the proper tool for the application. On your 12V 40A relay connect the yellow wire to permanent 12V source. Connect the grey...

are 360 slot is add to firmware? i can test the code by this week.
planning to use oem maf sensor, it like something nissan hotwire i guest.

10% to go..

Yes. I am populate frankenstein 0.11. Got 2-3 part not in my hand yet. So iam using frankenso for testing only. Once it ready, it will be frankenstien on sr20ve.

I wonder, this 4 slot will act like 4/1 slot?

russian wrote:

matt wrote:now its start!! trigger offset is 630.

And runs? Video?

yes running smooth at idle. i can rev up to 3000rpm. not going to rev more because now is 12am. my neighbour probably mad at me.

i can make video by tomorrow morning.

now its start!! trigger offset is 630.

ok. got rpm sync, ignition led blink and injector led blink.
from where should i start a trigger offset? 0, 180 or 360? just give me a number, i will try increase or decrease.


p/s: where the hell is my timing light? arghhhh

got it. just now i check at build server it still 21/3/2017 firmware. now is 22/3/2017

i'am not familar with github. where i can download rusefi_release.hex?

Dont know i am right or wrong. So which one is widest slot?

looks like no rpm sync with spark plug on engine.

ok, will provide log with spark plug by tomorrow. i will try to crank it for 20 second.
do i need to use 2017-03-21 08:00 8.4M firmware to log?

in TS i did't see rpm sync, but in console yes. its around 160-170rpm.
this log i take out spark plug to make engine rotate smoothly. maybe it not sync at slow rotation?

i have order my timing gun, but not in my hand yet. dont know where it stuck.

it start with 4/0 at 0 degree offset, but just a few second and engine not stable.
with nissan trigger no rpm sync at all.

p/s: no timing gun yet

i'am also logging for 360 slot if this is needed.

4 slot with enable trigger_details & writeconfig commands.

russian wrote:Next time try enable trigger_details & writeconfig commands in console or "print sync details to console" option in TS. This would produce some helpful messages with synchronization progress details.

can i do this while cranking?

today progress.

with nissan trigger setup in TS, no rpm sync.
with custom tooth setup it start for a 5 second, and engine stop if throtle if press.

i can start engine with standard ecu and log a trigger in console if its needed.

i'am not so understand on issue #314 'faster cranking with battery-backed RAM'.
meaning on my stm32 disc got battery or i must put a battery at the back of my frankenso rev0.2?

just curious, is this trigger event?

and it start only once, not for 2nd time.. i try with custom tooth wheel rpm show correct, but with nissan looks like not stable and sometime remain 0 rpm. gonna work on it tomorrow.

and YESSS!! its start..

yes. iam using snapshot_20170318_2151_rusefi

in TS it should be nissan trigger or custom tooth wheel? i test both is sync. i'am gonna to re-wired my cas now. hopefully it will start tonight.

russian wrote:
What year/donor is your sr20ve? Want to name this trigger properly.

not sure, but i believe it come from primera p11 year 1995-2002.

i'am also logging for a 360 slot. in case if you need that.
custom tooth wheel is set to 36.

4 slot

sorry, i don't know any about trigger calculation.
so i need to log with only 4 slot?
i can provide this 4 slot in evening or tomorrow.