rusefi.com

2)... DOH, I forgot I didn't put the LED's on the low side, LOL :roll: I also realised that In "Injector #1" in the console is NOT INJ-01_2 on the Frankenso board. :? (I noticed the console Triggering PB9 in the console window and started tracing the schematics to INJ-09 on the Schematics)...

Ok so I got some time to spend with the board. I have two questions. 1) I tried the injector test with the console.... should the indicator LEDs light up or is there a 5V jumper I am missing? 2) How is the Joy stick mapped out? I see this after moving the Joy stick in all 4 directions + center. 2019...

If this has the Toyota VAST ignition (with the two wheels in the distributor) it might work with that. I've been meaning to see if I can get synchronization but life is getting in the way. Otherwise, the RusEFI wiki supports a "Global Trigger Angle Offset" mentioned here: https://rusefi.c...

Got some better Photos of the trigger wheel. The trigger wheel is from a 7A/4A-FE Engine from a '96 Corolla tw2.jpg tw1.jpg I haven't welded the Trigger wheel to the Timing gear so If any one has advice on how to Clock them it would be appreciated. What I have in the pictures is it clocked the same ...

Things are too clean and too assembled :) Trigger looks like 36/2 or 36/3 or something similar? Is there a cam sensor anywhere? Do you have JP04 and JP05 between MAx9926 and stm32? When do you plan to crank the engine with this ECU? :) Yes Nissan instills 5S in the work place some of it carries ove...

Evening from Mississippi! My 86 MR2 Has been an on going project for the past 8 or so years. It's now time to get rid of the 1980s ECU and step up to something more modern :D Goals for this project are: 1) Learn 2) Update the ECM / Wiring harness 3) Make the car / Engine electrical more manageable a...

pk386 = 39157