Search found 14292 matches
- Wed Mar 12, 2014 6:07 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
VR chip alone costs something $8. VR chip is requited for VR sensors. VR chip can handle Hall and Optical, but it's cheaper to use plain op-amp analog input circuit. But that's only true if it does work - it works for me on my Aspire and it's the only installation, the red Festiva with a 323 here is...
- Wed Mar 12, 2014 5:59 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
Do you have a printer? Because if you, you can print Schematic.pdf and look at it page by page... Please tell me your wiki login (separate registration required) and I would give you Write permission, you would be able to improve the Frankenstein assembly page. PS: can I move this thread into 'your ...
- Wed Mar 12, 2014 5:05 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
BTW there is also a 'compact' version - same data, just aggregated with qties https://svn.code.sf.net/p/rusefi/code/trunk/hardware/frankenstein/digikey_parts_compact.csv
- Wed Mar 12, 2014 4:28 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
There are more then two resistors in the BOM. Current version - https://svn.code.sf.net/p/rusefi/code/trunk/hardware/frankenstein/digikey_parts_full.csv - has a the full list. If you want to cherry-pick, the Frankenstein wiki - http://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenstein_boar...
- Wed Mar 12, 2014 3:59 pm
- Forum: Dev: Hardware
- Topic: universal ECU connector?
- Replies: 66
- Views: 54601
Re: universal ECU connector?
I think that's a harness-to-harness connector, like from wires to wires. Which should work if you solder some wires to the PCBsketchman wrote:22 pin bulkhead connector kit
- Wed Mar 12, 2014 3:57 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
Delphi Packard Bulkhead connector Kit - this looks like a harness-to-harness connector?
I use www.ebay.com/itm/121122884285 and we have a board for this connector - we have a board for it http://rusefi.com/forum/viewtopic.php?uid=2&f=4&t=507
I use www.ebay.com/itm/121122884285 and we have a board for this connector - we have a board for it http://rusefi.com/forum/viewtopic.php?uid=2&f=4&t=507
- Wed Mar 12, 2014 3:56 pm
- Forum: Dev: Hardware
- Topic: 64 pin 176122 ECU connector board
- Replies: 32
- Views: 41122
64 pin 176122 ECU connector board
I've realized that we do not have a thread for the 176122-6 connector board - this board was finished before the forum was created. https://github.com/rusefi/rusefi/tree/master/hardware/Breakout_64pin_176122-6-Connector 176122-6-connector.zip Also available at our store http://rusefi.com/hardwave/17...
- Wed Mar 12, 2014 2:27 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
AFAIK there is a difference between VAF/MAF and MAP logics. Air flow meter you just take analog value, but for MAP it's more complicated - you need multiple readings withing a particular windows of camshaft angles and then you average these values. So, there is some extra code which I've kinda start...
- Wed Mar 12, 2014 1:56 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
This case you would be a MAP trailblazer. But yes, same bare essentials - sensors are just analog input channels. That's to the best of my knowledge.
- Wed Mar 12, 2014 1:53 pm
- Forum: You and your build
- Topic: '92 Festiva with 1.6L SOHC
- Replies: 48
- Views: 43671
Re: '92 Festiva with 1.6L SOHC
PS: skeeters_keeper , need your help with something. I need the log file of that noisy run - I want to look at the numbers & see if software filtering is an option. The logs are in you 'out' folder, the file name is the time of log start. Worst case you would need to re-create that situation :)
- Wed Mar 12, 2014 1:39 pm
- Forum: Dev: Hardware
- Topic: Parts Req - Ford Festiva - Stock Engine
- Replies: 17
- Views: 12160
Re: Parts Req - Ford Festiva - Stock Engine
You would need some boards - you have to decide if you want to go with individual 'modules' - small analog PCB & small injector PCB (this one can drive ignition, too), or you want to to use the http://rusefi.com/forum/viewtopic.php?f=4&t=359 board, or you want to make your own board out of s...
- Wed Mar 12, 2014 12:41 pm
- Forum: You and your build
- Topic: '92 Festiva with 1.6L SOHC
- Replies: 48
- Views: 43671
Re: '92 Festiva with 1.6L SOHC
I like these pictures :) That button with the plus on it is zoom in, can you please hit it next time you try that? So that we see say 6 to 12 waves. Just to see the lack of noise. Now a separate question how we will apply the comparator approach to the existing boards? So, do we need to adjust the b...
- Wed Mar 12, 2014 9:53 am
- Forum: Другое
- Topic: Всякие глупые вопросы, терзающие меня
- Replies: 1158
- Views: 801782
Re: Всякие глупые вопросы, терзающие меня
HIP9011 часть выделилась в http://rusefi.com/forum/viewtopic.php?f=9&t=505
- Wed Mar 12, 2014 9:44 am
- Forum: Прошивка
- Topic: Про программирование HIP9011
- Replies: 82
- Views: 66349
Re: Всякие глупые вопросы, терзающие меня
Это значит ему придётся выделить целый SPI, чтоб данные от него не пропустить? HIP просто публикует в SPI когда что-то ловит, или он всё-таки отвечает на постоянные запросы МК?Maxi wrote:данные в цифре можно снимать по SPI. это сильно меняет дело вообще...
- Tue Mar 11, 2014 8:44 pm
- Forum: Прошивка
- Topic: Про программирование HIP9011
- Replies: 82
- Views: 66349
Re: Всякие глупые вопросы, терзающие меня
я тут осознал что у http://rusefi.com/forum/viewtopic.php?t=357 был плохой заголовок и его не было в списке тем по железу - добавил в список русских тем.
- Tue Mar 11, 2014 6:47 pm
- Forum: You and your build
- Topic: My fleet - they say they are Fords, but they are Mazdas
- Replies: 30
- Views: 31273
Re: My fleet - they say they are Fords, but they are Mazdas
I guess I should get it once there are five engines running rusEfi?
- Tue Mar 11, 2014 4:08 pm
- Forum: Железо
- Topic: Про экранчики
- Replies: 66
- Views: 46565
Re: Про экранчики
Кстати да, драйвер DMA не будет доступен в момент краша rtos. А прямо прямое управление пинами 20x4 никуда не денется. @, спасибо за напоминание!puff wrote:будет ли в этом случае доступен DMA?
- Tue Mar 11, 2014 4:04 pm
- Forum: Железо
- Topic: Про экранчики
- Replies: 66
- Views: 46565
Re: Про экранчики
Пожалуйста, присылай патч Идей много, работников - полтора.
- Tue Mar 11, 2014 3:19 pm
- Forum: Железо
- Topic: Про экранчики
- Replies: 66
- Views: 46565
Re: Про экранчики
Да? Тогда наверное тоже вариант. Просто лучшее - враг хорошего 20x4 уже есть.
- Tue Mar 11, 2014 1:26 pm
- Forum: Железо
- Topic: Про экранчики
- Replies: 66
- Views: 46565
Re: Франкенштейн - ЭБУ в виде платы расширения discovery
мне кажется использование lcd-шки от сотофона(например от нокии какой нить) было бы интересней да и прост он в использовании они все жутко мелкие, что мы там можем такое жутко мелкое полезное вывести? по-моему, тут или нужно 7 дюймов - ну хоть 4 - а всё остальное слишком мелко для графики. А если б...
- Tue Mar 11, 2014 12:03 pm
- Forum: You and your build
- Topic: Hello there.
- Replies: 2
- Views: 3300
Re: Hello there.
Welcome
It's never to late... to touch an EFI.
It's never to late... to touch an EFI.
- Tue Mar 11, 2014 1:30 am
- Forum: Прошивка
- Topic: Про программирование HIP9011
- Replies: 82
- Views: 66349
Re: Всякие глупые вопросы, терзающие меня
Есть вот такой - http://rusefi.com/forum/viewtopic.php?f=8&t=388 - там может что-то быть
- Mon Mar 10, 2014 10:09 pm
- Forum: Dev: Hardware
- Topic: HIP9011 module
- Replies: 34
- Views: 31679
Re: HIP9011 module
If something does not fit, use the hammer. Problem solved.
Please PM me your address I will mail you a board.
Please PM me your address I will mail you a board.
- Mon Mar 10, 2014 9:54 pm
- Forum: Dev: Hardware
- Topic: HIP9011 module
- Replies: 34
- Views: 31679
Re: HIP9011 module
Please let me know what size of hammer I should mail you to make this happenpuff wrote:... and a small hammer
http://oshpark.com/shared_projects/bYitHt3p
- Mon Mar 10, 2014 9:12 pm
- Forum: Dev: Hardware
- Topic: HIP9011 module
- Replies: 34
- Views: 31679
Re: HIP9011 module
Most of the above. Soldering should take 20 minutes, but I do not have the time to write the firmware integration - and, most importantly, I do not have time to figure out how to test it (real signal or fake signal or recorded signal). The whole effort is on the scale of days and I do not have that ...
- Mon Mar 10, 2014 8:39 pm
- Forum: Dev: Hardware
- Topic: HIP9011 module
- Replies: 34
- Views: 31679
Re: HIP9011 module
It has been two months since the board has arrived but I am failing to find time to play with it
- Mon Mar 10, 2014 6:38 pm
- Forum: Другое
- Topic: тихий ужас на cxem.net :(
- Replies: 28
- Views: 26658
Re: тихий ужас на cxem.net :(
Супер, спасибо за ссылку!
Значит стёрли вопрос тупо от страха
Значит стёрли вопрос тупо от страха
- Mon Mar 10, 2014 5:08 pm
- Forum: Другое
- Topic: тихий ужас на cxem.net :(
- Replies: 28
- Views: 26658
Re: тихий ужас на cxem.net :(
А где люди сейчас берут исходники MSAVR и что написато в той лицензии? Если та версия чистая и открытая - чего боится модератор на cxem.net - или он просто истерит?
- Mon Mar 10, 2014 3:55 pm
- Forum: Другое
- Topic: тихий ужас на cxem.net :(
- Replies: 28
- Views: 26658
Re: тихий ужас на cxem.net :(
Тем временем вопрос про правомочность использования megasquirtavr там тоже стёрли, это наводит на подозрения. По http://megasquirtavr.sourceforge.net/ я понял что MSAVR никак не связан с MS и является предком VEMS? Какая там ситуация - MSAVR был более открытым, но теперь авторы его как могут прячут,...
- Mon Mar 10, 2014 3:08 pm
- Forum: You and your build
- Topic: 1995 Ford E-150
- Replies: 350
- Views: 234985
Re: 1995 Ford E-150
Yes, you absolutely need to have java 7 to run the console. You should backup the .ini file if that's valuable, but I just to not see what could happen to an .ini file with a JRE update. Worst case scenario you would un-install java 7 and re-install java 6. I run TS with the same java 7 I use for th...