rusefi.com

https://rusefi.com/online/view.php?msq=41 shows gppwm1_pin NONE same 2 3 4, that's good. Something is using PA0 already so you have a pin conflict. Please tell something not to use PA0 In your tune I see auxVoltage1:PA0 auxVoltage2:PA0 place change those to NONE Thank you. I'm going to change that....

In TunerStudio when I trying to change from MAP to MAF and assign pin PA0 to MAF the ecu reboots with a critical error.

Something to the effect of gp pwn needs to use PA0

AndreyB wrote: ↑

Fri Jul 03, 2020 1:53 am

It's the miracle of continuity!!!

Considering the state of instructions circa 2017 and even now I consider it a miracle the board didnt burst into flames along with my car.

mck1117 wrote: ↑

Fri Jul 03, 2020 12:57 am

snip.PNG

Yup didnt have one. Just added them and...

AndreyB wrote: ↑

Fri Jul 03, 2020 12:37 am

Do you have continuity between MAX9926 output and stm32 inputs pins PA5 PC6?

No sir I do not. Excellent deduction. No continuity from that jumper to the pins.

Now why I do not is another question.

AndreyB wrote: ↑

Fri Jul 03, 2020 12:15 am

REO is broken now Please paste tune as .zip attachment here.

In rusEFI console there is "sensor live data" tag with event counters. Do these counters go up?

Sadly no. Those counters never go up. Zero values.

mck1117 wrote: ↑

Thu Jul 02, 2020 11:52 pm

sleepingAwake wrote: ↑

Thu Jul 02, 2020 11:52 pm

mck1117 wrote: ↑

Thu Jul 02, 2020 11:49 pm

sleepingAwake wrote: ↑

Thu Jul 02, 2020 11:47 pm

Just posted it.

oh boy your firmware is ancient

Shoot I thought I updated that.

oh

I read wrong, it's actually quite recent

LOL and guess who just updated firmware again? Oh well. Didnt hurt but didnt help.

mck1117 wrote: ↑

Thu Jul 02, 2020 11:49 pm

sleepingAwake wrote: ↑

Thu Jul 02, 2020 11:47 pm

Just posted it.

oh boy your firmware is ancient

Shoot I thought I updated that.

Your hardware seems to work. All the remaining answers are in your settings in my opinion. A video of the board running would not help troubleshoot your settings. If you are looking for any help from here please upload your incomplete tune to rusEFI online. Just posted it. https://rusefi.com/online...

It looks like hardware senses the signals which is great news and the most challenging part! Now you need to get into software. You need to be looking either at Engine Sniffer in rusEFI console or Composite Logger in TunerStudio. And please publish your tune at rusEFI online. Since the harness is i...

Here's a little video of the engine cranking over and the LED pattern. Reminder still no trigger input seen in RUSEFI console.
Shouldnt the Orange LED on the ST board flash with crank signal as well? I seem to remember reading that.

I had not but just looked through your thread. Pretty neat stuff. The talk of Mode B vs mode A2 is especially interesting and I wonder if that pertains to my board. It may take me some time to get my older Frankenso kit going. That being said testing for a crank and cam pickup pattern is on my to d...

Well I had some free time. Now I still havent actually wired the harness for MAF, TPS, IAC, INJ, IGN, but I have wired in the Crank and Cam sensors. I would think I would have seen some kind of trigger pattern in RUSEFI console and it said it was connected, flashed the MIL when tested (I wired that ...

Did you notice https://rusefi.com/forum/viewtopic.php?p=35502#p35502 ? I had not but just looked through your thread. Pretty neat stuff. The talk of Mode B vs mode A2 is especially interesting and I wonder if that pertains to my board. It may take me some time to get my older Frankenso kit going. T...

mck1117 wrote: ↑

Wed Jul 01, 2020 5:27 pm

Yup, default output settings should then work okay. And if you do blow up the unobtanium SVX ignitor, you can always splice in the ultra common Bosch ignitors.

Good point. Or go with a newer COP setup.

Yup block of transistors.

What kind of special are you thinking? So far I am not aware of anything special in similar circumstances. Special in that SVX igniters are as easy to purchase as Rooster Teeth and I'm being overly cautious. I think the igniter is just a block of transistors but I dont know if its inverted, open co...

I'm not dead. Hurt my knee last year and its slowed everything down. I've converted the SVX to a manual transmission since I last posted here. No more TCU to talk too. Going through the process of updating and re-configuring the Frankenso ECU as it needed an update from its last firmware image( circ...

boo

Excellent work!!! It runs very smooth.

I'm bored at work and currently playing around with TunerStudio and the discovery board.

Why do I get the error "Burn page 0 failed"? whenever I make a change and hit "Burn" in Tunerstudio.

More stuff and things happened today.

At some point maybe I could help with editing the instructions on software setup located in the wiki.
Currently they are a little confusing and some of the screenshots could use an update.

But they were good enough for me

Current status update.
Still need to order some more parts. But it lights up and I haven't lost any magic smoke.

The size is ok but the font is not crisp. There are many misprints (portions of characters missing).

I'd have to compare it to an inkjet printer running low on ink and having some clogged nozzles.

As long as the silkscreening is legible any color is fine.
The silkscreening on the frankenso 0.4 board isnt the easiest to read.

white or blue

argh. my bad! I thought it was 0805. Soldering 1206 instead of 0805 is a pain, at least on Frankenstein and at least for certain 1206s with smaller (narrower?) connectors. Ok i thought as much. How about this http://www.digikey.com/product-detail/en/taiyo-yuden/TMK212BBJ106KGHT/587-4334-1-ND/540090...

puff wrote:

10uf 25v cap TMK316BJ106KL-T qty 10

Well i sure hope that was the right one. Its listed as such in the Frankenso 0.4 BOM but i just looked at the spec sheet and its a 1206 package.
Perhaps kb1gtt can comment.

Ive ordered a few parts that were either missing from the diy kit or optional. 4.7uf 50v cap CGA4J3X5R1H475K125AB qty 10 Blue led LTST-C170TBKT qty 5 Red led LTST-C171KRKT qty 10 Green led LTST-C171GKT qty 10 Connector 178780-1 qty 1 10uf 25v cap TMK316BJ106KL-T qty 10 4.99k resistor RK73H2ATTD4991F...

puff wrote:

C354 is close to FDTI
C358 is close to SD card
C472 is close to CAN
C501 is close to HIP9011

Снимок экрана 2017-01-23 в 23.23.13.png

Isn't this a symbol for electrolytic capacitor?

I noticed the same thing.
In addition C354 and C358 are electrolytic in the schematic.