Search found 14292 matches

by AndreyB
Thu Sep 18, 2014 3:51 pm
Forum: Другое
Topic: Всякие глупые вопросы, терзающие меня
Replies: 1158
Views: 803854

Re: Всякие глупые вопросы, терзающие меня

puff wrote:для pull-down обьяснений не нашел :-(
детекция отсутствия датчика
by AndreyB
Thu Sep 18, 2014 2:22 pm
Forum: You and your build
Topic: Mitsubishi 4G63 and 4G92 (#6)
Replies: 328
Views: 240919

Re: Mitsubishi 4G63 and 4G92 (#6)

Sure, let's get you http://en.wikipedia.org/wiki/MIVEC Do you know if your engine is an earlier two-profiler system or something continues? http://en.wikipedia.org/wiki/Variable_valve_timing#Continuous_versus_discrete ? You would need to figure out electronic characteristics of the control mechanism...
by AndreyB
Wed Sep 17, 2014 7:28 pm
Forum: Dev: Hardware
Topic: 2013: Frankenstein - cheaper ECU shield / official / legacy
Replies: 88
Views: 136276

Re: Project Frankenstein - full ECU shield

I was wondering how this would work for a V8 engine. I'm assuming the engine it was tested on was a V6. And are there any final cost projections. I intend to do the DIY thing with this project. And was trying to get a ball park estimate on cost. thank you for the warm words :) So far all the engine...
by AndreyB
Wed Sep 17, 2014 6:59 pm
Forum: Dev: Hardware
Topic: Thermocouple input?
Replies: 54
Views: 42055

Re: Thermocouple input?

http://www.ebay.com/itm/Accurate-Probe-K-Type-2m-Wire-Earth-Thermocouple-For-Temprature-Meter-Controller-/360944722123?pt=LH_DefaultDomain_0&hash=item5409fb60cb Can operate it ? The link says "Temperature: 0-800°C" while it looks like we have closer to 900C-1000C temperatures. On the ...
by AndreyB
Wed Sep 17, 2014 6:29 pm
Forum: Другое
Topic: Всякие глупые вопросы, терзающие меня
Replies: 1158
Views: 803854

Re: Всякие глупые вопросы, терзающие меня

puff wrote: я правильно понимаю, что для датчиков верхнее плечо делителя должно быть снаружи платы?
нет конечно же - всё есть на плате http://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenstein_board#step_3:_Analog_Inputs
by AndreyB
Wed Sep 17, 2014 1:43 am
Forum: Другое
Topic: Всякие глупые вопросы, терзающие меня
Replies: 1158
Views: 803854

Re: Всякие глупые вопросы, терзающие меня

ЗЫ: а что ты уже спаял? ты пытаешься всё разом спаять-собрать-только потом поставить? есть ли шанс инкрементально собирать - типа сначала только форсунки?
by AndreyB
Wed Sep 17, 2014 1:41 am
Forum: Другое
Topic: Всякие глупые вопросы, терзающие меня
Replies: 1158
Views: 803854

Re: Всякие глупые вопросы, терзающие меня

по факту мои реле управлялись минусом, но у нас есть и транзисторы для управления плюсом - вот те, которых три штуки. разница версий франкенштейна - в размере корпуса тразисторов. 0.1 транзистор msop, 0.11 soic ОЖ... обычно это термистр на землю, значит надо делать резистор на +5 вольт. блин этот мо...
by AndreyB
Tue Sep 16, 2014 8:51 pm
Forum: Прошивка
Topic: Текущий прогресс по прошивке.
Replies: 365
Views: 343020

Re: Текущий прогресс по прошивке.

Sergey89 wrote:http://en.wikipedia.org/wiki/Integral_windup надо учесть наверное?
Добавил. Вот еще бы кто-нить тест бы написал и патч бы прислал... Эх :)
by AndreyB
Tue Sep 16, 2014 7:28 pm
Forum: You and your build
Topic: 2-stroke 3 cyl snowmobile.
Replies: 7
Views: 7089

Re: Sv: 2-stroke 3 cyl snowmobile.

what would be required from me in this project? Time mostly. Buing hardware, would like to buy as much turn key as possible. Connect hardware to snowmobile. Test software and report problems/bugs. Yes :) see http://rusefi.com/wiki/index.php?title=Manual:Current_Status Would be really good get this ...
by AndreyB
Tue Sep 16, 2014 1:05 pm
Forum: You and your build
Topic: 2-stroke 3 cyl snowmobile.
Replies: 7
Views: 7089

Re: 2-stroke 3 cyl snowmobile.

We have not yet got our hands on a vehicle with a turbo so no wastegate or launch control yet - but once there is someone ready to try/test/provide feedback, I have the time to implement whatever would be needed. If the Frankenstein would not be enough in terms of I/O channels we can add an extra 6 ...
by AndreyB
Mon Sep 15, 2014 10:45 pm
Forum: You and your build
Topic: 2-stroke support
Replies: 3
Views: 3850

Re: 2-stroke support

Please elaborate what exactly are you looking to control?

Anyway, if something is missing yet possible I will make it happen on the firmware side. We need people to use these :)
by AndreyB
Mon Sep 15, 2014 4:14 pm
Forum: Прошивка
Topic: Про программирование HIP9011
Replies: 82
Views: 66393

Re: Про программирование HIP9011

acab wrote:Обновился тестовый код кстати.

https://github.com/spillymon/TPIC/blob/master/TPIC8101_V1_5A
Интересная ссылка, спасибо. Написал человеку про наш проектик :)
by AndreyB
Sun Sep 14, 2014 8:32 pm
Forum: Dev: Software
Topic: Case Study: I do not like this jitter (solved)
Replies: 3
Views: 4221

Re: Case Study: I do not like this jitter

Made some good progress: version #4718 set_engine_type 3 rpm 24000 enable self_stimulation - a number of improvements to SingleTimerExecutor. note how ON times are not ~2.42ms but back to ~2.5ms where they should be - fast ADC is now disabled by default if it's not needed for the particular engine c...
by AndreyB
Sun Sep 14, 2014 5:24 pm
Forum: You and your build
Topic: 1994 MX5/Miata/Eunos 1.8 NA (Japanese Import)
Replies: 72
Views: 59069

Re: 1994 MX5/Miata/Eunos 1.8 NA (Japanese Import)

I've realized there is a mistake on the board. http://i.imgur.com/zM493tR.png In the bottom-left corner there is a piece of wire connecting one of the P602 pins with one of the P604 pins. This wire should be cut or unsoldered. Once the wire is removed, the better option is to solder a piece of wire ...
by AndreyB
Sun Sep 14, 2014 5:02 pm
Forum: You and your build
Topic: Mazda MX5 1.8 1999 AE (#4)
Replies: 38
Views: 45173

Re: Mazda MX5 1.8 1999 AE (#4)

As far as I know all 89 to 2006 cars (and possibly later?) were like this. Yep, that seems to be true. I am an idiot - I've realized that I had this picture all that time and I did not notice that it is +12v, not 5v: http://i.imgur.com/1N8Gh0Y.png Funny thing that discovery input pins seem to be su...
by AndreyB
Sat Sep 13, 2014 11:33 pm
Forum: Misc
Topic: What to do about bad drama?
Replies: 15
Views: 13257

Re: What to do about bad drama?

abecedarian wrote:I'd also like to commend Andrey (one day I'll spell it right, no? :D)...
Yes. See https://svn.code.sf.net/p/rusefi/code/trunk/firmware/rusefi.cpp
by AndreyB
Sat Sep 13, 2014 9:43 pm
Forum: Dev: Software
Topic: Firmware developent status
Replies: 498
Views: 662710

Re: Firmware developent status

dev console now has some keyboard shortcuts & text attributes in message area - that should make it a bit more user-friendly. Thank you @ for both ideas!
by AndreyB
Sat Sep 13, 2014 8:31 pm
Forum: Железо
Topic: Блок управления ГБО
Replies: 29
Views: 25621

Re: Блок управления ГБО

Эх, еще бы перевести кого-то на rusefi... А то не хватает людей с руками.
by AndreyB
Sat Sep 13, 2014 6:22 pm
Forum: You and your build
Topic: Subaru Impreza 98 --> 2002-ish
Replies: 19
Views: 18357

Re: Subaru Impreza 98 --> 2002-ish

A small step for a suby a giant leap for rusEfi.
by AndreyB
Sat Sep 13, 2014 6:19 pm
Forum: You and your build
Topic: Mazda MX5 1.8 1999 AE (#4)
Replies: 38
Views: 45173

Re: Mazda MX5 1.8 1999 AE

http://i.imgur.com/aTi5T62.png Have a question about your ignition control. I see you are using the "high/low" side chips for that, where is your VP line connected? Is it connected to +5, is it connected to +12 or is it left unconnected? See http://rusefi.com/images/Frankenstein/Frankenst...
by AndreyB
Sat Sep 13, 2014 1:10 pm
Forum: You and your build
Topic: Where to start & how to get involved?
Replies: 9
Views: 58186

Re: Where to start & how to get involved?

Update: I am answering the "What about Megasquirt" question too often here, the "Newton vs iPhone" picture is the gist of my answer - see http://rusefi.com/forum/viewtopic.php?f=2&t=239&p=1009#p1009 Does anyone have a Newton? I am looking for a picture of "Newton vs ...
by AndreyB
Sat Sep 13, 2014 10:39 am
Forum: Другое
Topic: тихий ужас на cxem.net :(
Replies: 28
Views: 26682

Re: тихий ужас на cxem.net :(

Пацанчики были резкие очень - пацанчики должны страдать. Формально бла бла бла бла.

Про tunerstudio ты ошибаешься, но если какие-то сомнения - ты всегда можешь прояснить этот вопрос с правообладателем.
by AndreyB
Fri Sep 12, 2014 10:22 pm
Forum: Другое
Topic: тихий ужас на cxem.net :(
Replies: 28
Views: 26682

Re: тихий ужас на cxem.net :(

Да, ты прав - всё так и было. Видишь ли, в чём дело: ребята утверждали, что ничего не нарушают. Потом там было что-то про "у нас русских свои понятия". Вот только Вангул живёт кстати в ЕС, а не в СНГ, и сайт его кстати был не на русском языке. Ну, а раз ребята ничего не нарушали - значит н...
by AndreyB
Fri Sep 12, 2014 9:33 pm
Forum: Другое
Topic: тихий ужас на cxem.net :(
Replies: 28
Views: 26682

Re: тихий ужас на cxem.net :(

acab wrote:андрей, благодаря тебе создатели мегасквирта, прикрыли недорогую лавочку почти халявных мегасквиртов...
Как это прикрыли? Почему? За что? Кто дал им такое право - вот так взять и прикрыть?
by AndreyB
Fri Sep 12, 2014 4:36 pm
Forum: Другое
Topic: Еще раз о терзающих вопросах
Replies: 122
Views: 80010

Re: Еще раз о терзающих вопросах

meXanicus wrote:Обновлю репо, собиру прошивку, создам заново проект в ТС, удалю лог из ТС и попробую воспроизвести. Так?
да :)
by AndreyB
Fri Sep 12, 2014 4:23 pm
Forum: Другое
Topic: Еще раз о терзающих вопросах
Replies: 122
Views: 80010

Re: Еще раз о терзающих вопросах

и проект TS свежий? Там в TS есть галочка "communication->debug log comm". Закрой плиз TS, сотри лог старый, запусти и поставь debug log comm галочку? Я бы на этот лог посмотрел бы.
by AndreyB
Fri Sep 12, 2014 4:16 pm
Forum: Другое
Topic: Еще раз о терзающих вопросах
Replies: 122
Views: 80010

Re: Еще раз о терзающих вопросах

meXanicus wrote:Показания tps отображаются в Консоли, а ТС нет.
Странно. А мы уверены, что ТС вообще работает?
Полезные команды - tpsinfo и tsinfo
by AndreyB
Fri Sep 12, 2014 3:45 pm
Forum: Dev: Software
Topic: Let's find bugs in Dev Console?
Replies: 6
Views: 5704

Re: Let's find bugs in Dev Console?

from v 3916 (july, 7) to 4662 got these errors in dev console after just clicking on 'main' tab: exception occurred Java.lang.IllegalArgumentException: Width (0) and height (0) cannot be <= 0 at java.awt.image.DirectColorModel.createCompatibleWritableRaster(DirectColorModel.java:1016) at java.awt.i...