rusefi.com

Just some labeling need swapping in the schematic.

Some issues with the Frankenso schematic pins of inputs and outputs. The board is not effected, just the wiring diagram. If anyone sees anything wrong with this
please advise.

I see that they are spares but I plan to use them.2 outputs are for radiator fans and one output for the idle valve. Radiator fans can start without a reason
but idle valve is critical.

Pins PD8 PD9 are also floating , if that helps.

Pins PE14 and pins PE12 are floating and the outputs are coming on falsely and that is problematic. These are so far 2 pins that I have seen because they have LED on output and that can be seen. I will advise if I see more. I do not know if the inputs have problems or if they are pulled down. All in...

Some pins are floating from what I noticed. They are working but when this unit is placed in a car the I/O pins should be grounded with a high value resistor so no false activity happens. This is my opinion though. I will do this in my board.

Is there any restriction which of the pins can be configured as input and which can be configured as output?

Okay thanks . Seem to work fine.

Hello there, I need to configure an output for the radiator fan( possibly 2 fans independently of each other) and output for the idle valve and an output for the fuel pump. I would also need another temperature sensor input for the intake air. Can someone advise how to configure these thru Rusefi co...

what is the command for make? I have the folder called stuff under C drive as well.

I can still not compile rusefi using arm GCC compiler.

it shows this: DI Main@DIMain-PC ~ $ arm-none-eabi-gcc -v Using built-in specs. COLLECT_GCC=C:\Program Files\GNU Tools ARM Embedded\6 2017-q1-update\bin\arm-none-eabi-gcc.exe COLLECT_LTO_WRAPPER=c:/program\ files/gnu\ tools\ arm\ embedded/6\ 2017-q1-update/bin/../lib/gcc/arm-none-eabi/6.3.1/lto-wrap...

Hi there,
I am trying to get this project going in Eclipse environment. I can not get it to run due to an error 127.
Thanks for the help.

It's okay. I am not sure what happened but I loaded the hex again and seem to work fine. The Tuners Studio does the test 3 times in 3 sec increments and one needs to wait as opposed to Rusefi that does it one time. The only issue I see is that there are no LEDs for the Ignition 3(PE10) and ignition ...

Hello there. I am new here so I have this question. Does anybody know if the outputs of Frankenso board of the ignition (spark) test and injection test match the displayed outputs on the Rusefi console? It does not seem to match. Also the Tuner Studio does not seem to activate on its test bench what...