rusefi.com

I found a source for inductor´s.
Is it ok?
http://www.sky-macau.com/Products/Inductors-C70/SMD-Chip-Surface-Mount-Power-Inductor-RoHS-33uH-330-12x12x7mm-P3817361683.html

Best regards , Hasse.

request sent to:
http://www.sunsoartech.com/
http://yhpcb.en.alibaba.com/
http://sky-macau.com/
http://pcb.hqew.net/
If they have additional questions i will ask here.
Hasse.

Ha ha ha .
You asked for it....
I will do my best.
Best regards , Hasse.

Done that.X2
X3
X4

Could this be something?
http://www.alibaba.com/product-gs/359248463/FR4_PCB_service_including_make_samples.html

How verry nice

//Hasse

How to make stencils:

Chip only ~10$
http://www.aliexpress.com/item/5PCS-STM32F407VGT6-STM32F407-ST-LQFP-100-ORIGINAL/1594588589.html

//Hasse

No i just got the mini usb connected and have sucessfully managed to flash the board. But now i cant get connected to the board when opening up Tunerstudio. Do i have to have a microusb to "talk" to the board? Problem solved: Mini USB is for power , MicroUSB is for "talking" so e...

Yes i`ve tried but i can´t connect.
When i go to taskmanager it doesn´t show
amongst ports as in your picture it
shows up as STMicroelectronics STLink dongle
With the other USB.

I had do do it the other way around. First download the drivers for STM. Then connect and flash the board. It worked! I don´t know if it´s a mix up or i´m just plain stupid.(Dont answer that :D ) I´m onboard now. But still no Rock´n Roll i cant get to the STM. It flashed alright but now i cant conne...

Damn you have been working.........
Looks impressive.

Best regards , Hasse.

I wonder if SHE knows that you have found her recipebox
I wouldn´t dare......mine

For ~1$ you get a 10cell 13x7x2.2 cm box incl shipping. http://www.ebay.com/itm/6-10-12-Cells-3-Layer-Wheel-Jewelry-Pill-Nail-Art-Drug-Storage-Ring-Case-Box-/261265503621?pt=AU_Housekeeping&var=&hash=item3cd4a33585
Always good to have things organized!

I suggest you get a cheap logic analyzer and record your signal while the engine is running at constant speed. There is a real chance that the widths of these four signals is different and by noticing the difference you would know which cylinder is which. Or this one , half the price: http://www.ba...

I will do a testrig first.
Aircooled????

Just for comparison:
My DD 8bit 256kb ?Mhz
Arduino 8bit 16Mhz
Vems 8bit 16Mhz
MS-1 8bit 8Mhz
MS-2 16bit 24Mhz
FreeEMS XDP512 16 bit 40Mhz
MS-3 16bit 50Mhz (100Mhz on second core XGATE)
STM 32bit 168mhz

It´s a fast bugger.......

No rotating thingies they are called holes , simple i know. :D If you think about it a distributor doesn´t have more points. What it does have is a gear with a couple degrees of backlash and you could not alter the curve easily. Yeah i know maybe it wont work but if it does it´s a 3$ sensor. Absolut...

C230 and D230 what is that.
Yes i know they are capacitor and some sort of diod.
But links pliiiiiiiiiiis.
As you can se down here
I
I
I
I
\/

Ok , i thought that Jared was up to some new construction. I have the resistors but where do i get hold of the op-amps. Like this? http://www.aliexpress.com/item/Free-shipping-VNS14NV04-40V-12A-8-SOIC-VNS14NV0-14NV-VNS14N-14NV0-VNS14-14NV04/1570042497.html I think i will have to do a step by step fo...

So now i have ordered version 2.
Maybe i should have waited......

//Hasse.

I do have these can we make them work? If that's a VR sensor - we have a VR board for this job Product Name: Inductive Proximity Switch DC 3 Wire Type (Black, Brown, Blue) Inductive Sensor Output Type: PNP NO (Normal Open) Diameter of Head: 12mm Detecting Distance: 4mm Supply Voltage DC 6-36V Curre...

Beware even with holes in them they are running.
They are all cast iron , virtually indestructable.
Obviously you could kill them , but they are hard to kill.

That´s not from my engine. My plan is to make a bracket for two sensors behind the pulley , not on the side like the picture I have not decided on any specific trigger sensor. I do have these can we make them work? http://www.ebay.com/itm/LJ12A3-4-Z-BY-Inductive-Proximity-Sensor-Detection-Switch-PNP...

Yes 1 (one) 500cc injector will give you roughly 100hp Yes 2 (two) 330cc injectors will give you 100+hp (330cc x 2 = 660cc) Yes 4 (four) 280cc injectors will give you 100+hp (280cc x 4 = 1120cc) Not to be smarty pants but if you´ve got 1 ,2 or 4 injectors actually make a difference. :) So is pressur...

My goal is to get a non injected pushrod engine working with as few components possible. The ignition sequense is 1 3 4 2. 1280px-Volvo_B20_M40.jpg What i´m thinking is wasted spark ignition.(simple) Batch fire of two plus two injectors , certainly it´s got some fancy name when doing so.(semi sequen...

Could we squeeze everyting in something like this: Could look realy good.

//Hasse.

Maybe you know a English site where this is on.
I give to you , the Nomogram. Ta da
http://www.docentdecibel.se/faq/beraekna-kabel-area/info_7.html

I think you all can handle some Swedish.
Best regards ., Hasse.

This is more what i had in mind. No habla ingles!!!