Search found 14328 matches
- Fri Oct 10, 2014 4:20 am
- Forum: Dev: Software
- Topic: Firmware developent status
- Replies: 498
- Views: 684240
Re: Firmware developent status
What's the reason for the expression to not be in order like "time_since_boot < 4 OR rpm > 0". RPN is super-easy thus efficient when it's time to evaluate the expression. there are always no brackets and you do not have to look forward, just a one-pass algorithm taking and putting stuff o...
- Fri Oct 10, 2014 4:16 am
- Forum: Прошивка
- Topic: Текущий прогресс по прошивке.
- Replies: 365
- Views: 359893
Re: Текущий прогресс по прошивке.
Ну значит сделаю онлайн конверт из нормальной в ОПН и обратно https://sourceforge.net/p/rusefi/tickets/104/
Бонус этой нотации - её просто обрабатывать и она быстро считается.
Бонус этой нотации - её просто обрабатывать и она быстро считается.
- Thu Oct 09, 2014 7:50 pm
- Forum: You and your build
- Topic: 1990 Mazda Miata NA with COPs - Project Aborted
- Replies: 18
- Views: 14285
Re: 1990 Mazda Miata NA with COPs
Sound like I should not be using the same disk for steel. Anyway back to the Miata - here is a picture of the board set for a 1994. The wiring is 98% the same (maf vs vaf but use the same wiring, batched injection vs sequential injection). Please note that on this picture the high-side driver is set...
- Thu Oct 09, 2014 7:39 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 243437
Re: Mitsubishi 4G63 and 4G92 (#6)
PS: can you please email me your mitsubishi.cpp if you made any changes, and post or email your 'showconfig' output?
- Thu Oct 09, 2014 7:36 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 243437
Re: Mitsubishi 4G63 and 4G92 (#6)
The yellow one - do we want more fuel or less fuel? Anyway please try http://rusefi.com/wiki/index.php?title=Manual:Software:Fuel_Control#Fuel_control_during_cranking Green - spark - this one is more strange. I wonder if your spark signal is inverted from normal? Can you check voltage on the spark w...
- Thu Oct 09, 2014 6:43 pm
- Forum: You and your build
- Topic: 1990 Mazda Miata NA with COPs - Project Aborted
- Replies: 18
- Views: 14285
Re: 1990 Mazda Miata NA with COPs
Oh... But I was just mildly touching, and I try not to be on the plane with the wheel. Note taken anyway!
- Thu Oct 09, 2014 11:24 am
- Forum: You and your build
- Topic: 1990 Mazda Miata NA with COPs - Project Aborted
- Replies: 18
- Views: 14285
Re: 1990 Mazda Miata NA with COPs
why?puff wrote:it's dangerous!
- Thu Oct 09, 2014 11:23 am
- Forum: Прошивка
- Topic: Текущий прогресс по прошивке.
- Replies: 365
- Views: 359893
Re: Текущий прогресс по прошивке.
ведь этот дефайн определяется не во время сборки? Ты забегаешь вперёд... Документацию... Эх, однажды :( Блин. Именно бензонасос - его логика задаётся сейчас да, во время сборки - но потом эта строчка парсится и выражение считается уже тем же механизмом, который будет парсить и считать и пользовател...
- Thu Oct 09, 2014 7:14 am
- Forum: Прошивка
- Topic: Текущий прогресс по прошивке.
- Replies: 365
- Views: 359893
Re: Текущий прогресс по прошивке.
Реле бензонасоса теперь частный случай гибкой логики управления выводами:
Это приближает нас к гибко настраиваемым выводам, которыми можно будет управлять соленоидами систем изменения фаз и так далее.
Code: Select all
#define FUEL_PUMP_LOGIC "time_since_boot 4 < rpm 0 > OR"
- Thu Oct 09, 2014 7:12 am
- Forum: Dev: Software
- Topic: Firmware developent status
- Replies: 498
- Views: 684240
Re: Firmware developent status
fuel pump relay is now implemented as a hard-coded flexible logic general purpose output:
This gets us closer to being able to specify expressions like that one for user-defined outputs, like variable timing or whatever.
Code: Select all
#define FUEL_PUMP_LOGIC "time_since_boot 4 < rpm 0 > OR"
- Thu Oct 09, 2014 7:06 am
- Forum: You and your build
- Topic: 1990 Mazda Miata NA with COPs - Project Aborted
- Replies: 18
- Views: 14285
Re: 1990 Mazda Miata NA with COPs
Frankenso does look bigger than I remember the stock ECU looked when I had it out about a year ago. the dimensions are actually the same - it's just the connector which is wider thus it does not work with 48 pin case. Once I am back home I'll check if it would be possible to massage the 48 case to ...
- Wed Oct 08, 2014 7:05 pm
- Forum: You and your build
- Topic: 1990 Mazda Miata NA with COPs - Project Aborted
- Replies: 18
- Views: 14285
Re: 1990 Mazda Miata NA with COPs
Probably not, sorry. See http://rusefi.com/wiki/index.php?title=Manual:Hardware:Mazda_PnPImA4Wheelr wrote: [*]ECU Box - Used one already in the car
- Wed Oct 08, 2014 6:39 pm
- Forum: You and your build
- Topic: 1990 Mazda Miata NA with COPs - Project Aborted
- Replies: 18
- Views: 14285
Re: 1990 Mazda Miata NA with COPs
Wow, this is looking to be an amazing thread! If you want to want to solder some outputs now, look into board testing mode feature once you have them - that would be straight forward. https://docs.google.com/spreadsheets/d/1LTvS7I-128Hft9uXHG1JrBxetVjGJDSBkySgVDQ6MGk would be pretty useful for analo...
- Wed Oct 08, 2014 1:39 pm
- Forum: You and your build
- Topic: Miata NA 1996, 1.8L stock (#7)
- Replies: 101
- Views: 90816
Re: Miata NA 1996, 1.8L stock (#7)
How hard would it be to reach the connector on the actual IAC? I am curious how the OEM IAC would look like with IAC disconnected and some 10k resistor pulling the IAC line to +12. Jared please approve this test
This would tell us if the orm ECU outputs plain 0/12v PWM or more like 8/12v PWM
This would tell us if the orm ECU outputs plain 0/12v PWM or more like 8/12v PWM
- Wed Oct 08, 2014 9:43 am
- Forum: You and your build
- Topic: Miata NA 1996, 1.8L stock (#7)
- Replies: 101
- Views: 90816
Re: Miata NA 1996, 1.8L stock (#7)
Just to confirm:
stock ECU idling IMG_20141004_113036.jpg
rusEfi without diode, igniton on IMG_20141006_203216.jpg
Is that right? This case we need rusEfi with diode picture just to have the full set.
stock ECU idling IMG_20141004_113036.jpg
rusEfi without diode, igniton on IMG_20141006_203216.jpg
Is that right? This case we need rusEfi with diode picture just to have the full set.
- Tue Oct 07, 2014 5:46 am
- Forum: You and your build
- Topic: Miata NA 1996, 1.8L stock (#7)
- Replies: 101
- Views: 90816
Re: Miata NA 1996, 1.8L stock (#7)
There is something about clamping in the VNS14NV04 datasheet but Jared should comment. Injectors are also solenoids so they might show something similar, but injectors are usually running at lower frequency. http://i.imgur.com/MuhGEFj.png How does the car react to IAC pwm changes? Can you post the s...
- Mon Oct 06, 2014 12:59 pm
- Forum: You and your build
- Topic: Ford 2.3 Lima
- Replies: 22
- Views: 19097
Re: Ford 2.3 Lima
Is that the side attached to the PCB or the side attached to the wires? Any logos?jengeltx wrote:E4LB-13A359-B
- Mon Oct 06, 2014 4:32 am
- Forum: You and your build
- Topic: frankenso vs frankenstein
- Replies: 15
- Views: 12026
Re: frankenso vs frankenstein
you should be fine up to a v8
- Sun Oct 05, 2014 7:25 pm
- Forum: You and your build
- Topic: frankenso vs frankenstein
- Replies: 15
- Views: 12026
Re: frankenso vs frankenstein
both boards have the same number of channels
- Sun Oct 05, 2014 7:01 pm
- Forum: You and your build
- Topic: frankenso vs frankenstein
- Replies: 15
- Views: 12026
Re: frankenso vs frankenstein
the boards stays the same regardless of who assemble it. Frankenso SD is not functional, same with Frankenso Bluetooth - it's not functional, again - the traces on the board are not going where they should be going. yes SD is only for logging. configuration is kept inside the main chip flash memory,...
- Sun Oct 05, 2014 4:36 pm
- Forum: You and your build
- Topic: frankenso vs frankenstein
- Replies: 15
- Views: 12026
Re: frankenso vs frankenstein
http://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenso_board has the link to https://svn.code.sf.net/p/rusefi/code/trunk/hardware/frankenso/known_issues.txt and http://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenstein_board now has a link to https://svn.code.sf.net/p/rusefi/cod...
- Sun Oct 05, 2014 1:04 pm
- Forum: Dev: Software
- Topic: rusEfi simulator
- Replies: 26
- Views: 86651
Re: rusEfi simulator
Nope - I simply do not have onejfive wrote:Have you tried the jim stim with one of the units yet?
this topic is about a simulator, not a stimulator. The simulator is a piece of windows software which you use without any hardware whatsoever.
- Sun Oct 05, 2014 6:49 am
- Forum: You and your build
- Topic: frankenso vs frankenstein
- Replies: 15
- Views: 12026
Re: frankenso vs frankenstein
The boards are pretty close, Frankenso is a newer more integrated design with some tracing issues in rev 0.1 - see http://rusefi.com/wiki/index.php?title=Hardware:For_Sale for brief a comparison on top of the page. Both boards can input analog narrow-band or wide-band, the AFR would be shown on a ga...
- Sat Oct 04, 2014 6:56 pm
- Forum: Dev: Software
- Topic: FSIO: GPIO implementation
- Replies: 37
- Views: 30605
Re: GPIO implementation
My point was that spending the time to do the calcs and then later changing the GPIO status to match is a waste of time I cannot agree with this point. Premature optimization is evil , at this point I'd rather focus on usability and flexibility, we should only talk performance when and if it would ...
- Sat Oct 04, 2014 6:13 pm
- Forum: Dev: Software
- Topic: FSIO: GPIO implementation
- Replies: 37
- Views: 30605
Re: GPIO implementation
Sure, at the end of the day the outputs are toggled thus the registers are involved somehowabecedarian wrote:High-level functions that influence low-level GPIO, and thus hardware registers, no?
- Sat Oct 04, 2014 3:17 pm
- Forum: You and your build
- Topic: 2003 Dodge Neon (#9)
- Replies: 109
- Views: 100930
Re: 2003 Dodge Neon
2 hours of VM&P Naphtha bath
tooth brush cleanup
2 hours of fresh VM&P Naphtha bath
tooth brush cleanup & warm soapy water
success
tooth brush cleanup
2 hours of fresh VM&P Naphtha bath
tooth brush cleanup & warm soapy water
success
- Sat Oct 04, 2014 2:30 pm
- Forum: Железо
- Topic: Модуль зажигания
- Replies: 31
- Views: 29457
Re: Модуль зажигания
Никого нет Хочу схему и платку.Sergey89 wrote:Посмотрю какие аналоги есть доступные и нарисую схему. Плату могу попробовать тоже нарисовать или кто-нибудь другой может захочет.
- Sat Oct 04, 2014 1:25 pm
- Forum: Прошивка
- Topic: Текущий прогресс по прошивке.
- Replies: 365
- Views: 359893
Re: Текущий прогресс по прошивке.
Должен завтра приземлиться в Питере, надеюсь кого-нить в Питере увидеть
- Sat Oct 04, 2014 1:24 pm
- Forum: Dev: Software
- Topic: Firmware developent status
- Replies: 498
- Views: 684240
Re: Firmware developent status
I am going to be in Russia for the next two weeks, so I should be in bed about 3pm CST and back online around midnight in the US.
- Sat Oct 04, 2014 1:22 pm
- Forum: Dev: Software
- Topic: FSIO: GPIO implementation
- Replies: 37
- Views: 30605
Re: GPIO implementation
FAN and COOLANT tokens would be higher-level functions, not really related to actual hardware registers.