rusefi.com

Maybe, the same as 60/2 vs. VW60/2 ...
as we discussed before ..
it is the same "hardware" wheel .. but readings with HALL vs. VR is different

Previous was 20220126...

now I have 20220422 ..
..
it is customer car and I can use stable release ...

Thanks ....

Ok ..
it's just a warning message... (LED is ON)

It's problem for the future or not ..?

Where is SPI and CS dialog in latest MRE 20220422 release ..??

I need it ... and same peoples also ...

SO ... tune and log are online ... I have some problem with trigger ... and it is not "mechanical" problem ... (checked many times) CAM is single tooth on HALL CRANK is RENIX with original renault VR Sensor. All signals looks good on scope. VR polarity change has no affect ... (..it has .....

I have no google account ..

runnig engine:
http://89.173.96.22/dohc/Renault8/VID_20220517_191807-0-28x.mp4

OT:
some dialogues for other steering pumps is welcome ..

I have pump from Mercedes A klasse - it need 12V signal ..
and another TRW pump form any OPEL .. for testing ..

So, we can test it ...

..and some photos ....

"CAM Sensor" INTAKE ...

Piatok 13tého
http://89.173.96.22/dohc/Renault8/DSCN5863.AVI

Can I ask ...
Renix trigger + CAM sensor ... will it run on full seq ..??

EDITED:
The answer is: YES

FCM32F046 was soldered, programed, but, LEDs blinks different ...

..not tested with sensor yet ..

look at VWAG EGT sensors for DPF filters ...
or other marks ...
they have "stock" connectors ...

and inaccuracy is about 5-7 degC

(sensor have aprox. 2-3 degC itself)

how accuracy we need for thermocouple ..?

5 or 10degC ,, ??

it is FCM32F042C6T6 ... for testing ...
for 25$ ...

chinese MCU are here ...

..maybe ... use the same type of Molex connector for the future ... due to use the same pins as MRE have .. (24 or 32 pin) 2 AUX outs per one WBO2 controller is enough ... (I think) https://www.aliexpress.com/item/4000043947422.html?spm=a2g0o.store_pc_groupList.8148356.10.4a29135b2kCSW3 https://www....

2 per one controller / sensor ..??

(is enough pins on MCU .. ??)

BTW:
This WBO2 controller might be bigger then MRE ...

another 2 analog outputs for "display" .. ??
Lambda1 = 1Volt .. ??

https://rusefi.com/forum/viewtopic.php?p=44963#p44963

..mm.. some update .. this car is mess, everything is wrong ... wrong pipes, wrong gaskets, wrong gearbox mechanism .. wrong clutch mechanism, all hoses and pipes touch together .. I have some "new" connectors, prepared wiring loom ... and fabricated bracket for CKP sensor ... (and it works)

waintig for FCM32F042 ...

..and MCP6L04T is used as opamp ...

1A is not high curent ...
look at my addon board ..

It will be better for users .. have wire order one-to-one ...

EDITED:
it have 4 layers ..? (pcb)

maybe it's too late, I have no idea how many pcbs you ordered ... but is possible to modify PIN ORDER on main connector to match the pin order on LSU sensor .. ?? somethink like: 1*-LSU IP - LSU Vm -*7 2*-Heat- - Heat+ -*8 3*-LSU Rt - LSU Un-*9 4*-Vout1 - Vout2-*10 5*-CanL - CanH-*11 6*-GND - 12Raw-...

...is able to make backup via K-line .. when you have 45-80 min. time ...

WOW ... GD32F ....

NO ... from TME ..

MCP6004 is out of stock ...

what kind of OP Amp can be used ..?? LM2902PT or TL084IPT

EDITED:
maybe MCP6L04T ..

I have some PCBs for LQFP48 ...

EDITED:
10 pieces ordered ...