Search found 102 matches

by atntpt
Tue Sep 10, 2019 8:57 pm
Forum: Dev: Hardware
Topic: Frankenso - ECU shield compatible with OEM case / official
Replies: 552
Views: 560813

Re: Frankenso - ECU shield compatible with OEM case / official

Testing on bench , I noticed if I power it via discovery usb the 5v line also varies .
by atntpt
Tue Sep 10, 2019 7:11 pm
Forum: Dev: Hardware
Topic: Frankenso - ECU shield compatible with OEM case / official
Replies: 552
Views: 560813

Re: Frankenso - ECU shield compatible with OEM case / official

Can anyone help me understand why do i have this noise on analog inputs ?
The frequency of the noise seams to sync with some kind of led blink or something
by atntpt
Mon Aug 05, 2019 7:40 pm
Forum: Dev: Hardware
Topic: Low side driver.
Replies: 3
Views: 3708

Re: Low side driver.

i was thinking relays and stuff
by atntpt
Sun Aug 04, 2019 1:25 pm
Forum: Dev: Hardware
Topic: Low side driver.
Replies: 3
Views: 3708

Low side driver.

Have MCZ33999 been considered ? It's relatively cheap and available ..
by atntpt
Fri May 10, 2019 6:33 pm
Forum: Dev: Software
Topic: aux temp
Replies: 5
Views: 4893

Re: aux temp

oh great tks! but it seems now with full pinout 1/2 and 2/2 that aux temp sensor input setting is missing
by atntpt
Thu May 09, 2019 9:46 pm
Forum: Dev: Software
Topic: aux temp
Replies: 5
Views: 4893

Re: aux temp

Is it very dificult to do? It's only TS display part or is firmware related ? I guess it should be similar to iat and clt . Anyone willing to help ? I wanted to deploy a fan depending on oil temp
by atntpt
Thu May 09, 2019 5:28 pm
Forum: Dev: Software
Topic: aux temp
Replies: 5
Views: 4893

aux temp

there is anyway i can display aux temp on tunerstudio?
by atntpt
Wed Apr 24, 2019 5:08 pm
Forum: Dev: Software
Topic: serial comunication problem
Replies: 3
Views: 3341

Re: serial comunication problem

Also with lower baudarates fails less often
by atntpt
Wed Apr 24, 2019 10:06 am
Forum: Dev: Software
Topic: serial comunication problem
Replies: 3
Views: 3341

Re: serial comunication problem

the thing is i have done some burns a couple days ago and TS never disconected now is always disconecting. is it random? also if hc05 is soldered usb stops working tryed a diode on BT module TX but still unable to use usb ..
by atntpt
Sat Apr 20, 2019 7:55 am
Forum: Dev: Software
Topic: serial comunication problem
Replies: 3
Views: 3341

serial comunication problem

tunerstudio disconect after burn anything console give me this 2019-04-20 08_49: EngineState: confirmation_writeconfig:11 2019-04-20 08_49: EngineState: !!!!!!!!!!!!!!!!!!!! BE SURE NOT WRITE WITH IGNITION ON !!!!!!!!!!!!!!!!!!!! 2019-04-20 08_49: EngineState: flash compatible with 10001 2019-04-20 ...
by atntpt
Sat Apr 20, 2019 7:36 am
Forum: Dev: Software
Topic: Closed loop boost control / map sw
Replies: 16
Views: 18328

Re: Closed loop boost control / map sw

anyone?
by atntpt
Fri Apr 12, 2019 5:02 am
Forum: Dev: Software
Topic: Closed loop boost control / map sw
Replies: 16
Views: 18328

Re: Closed loop boost control / map sw

I can't really understand FISO sintax but, a simple way to do it is to have only one table of boost target x axis " Request " from zero to 201 ( keep with me ) the y the RPM range . And then some expressions that Like: if switch on: request = TPS + 101 Else : request : TPS ( Target boost i...
by atntpt
Thu Apr 11, 2019 9:47 pm
Forum: Dev: Software
Topic: Closed loop boost control / map sw
Replies: 16
Views: 18328

Re: Closed loop boost control / map sw

I'm sorry, so from the beginning turbos have a Westgate, basically a bypass valve. This value is vacuum /pressure controlled but inline with that there is a solenoid that allows to control how much we want the value to Open. Therefore a boost pressure target can be controlled this mean different pow...
by atntpt
Thu Apr 11, 2019 9:13 pm
Forum: Dev: Software
Topic: Closed loop boost control / map sw
Replies: 16
Views: 18328

Re: Closed loop boost control / map sw

The idea is to have 2 driving modes , one more agressive than the other. 2 different ve and ign maps I know is not possible so I thought in having the same maps just switching between boost target and reach higher loads where the map can be less conservative.
by atntpt
Thu Apr 11, 2019 1:58 pm
Forum: Dev: Software
Topic: Closed loop boost control / map sw
Replies: 16
Views: 18328

Closed loop boost control / map sw

I guess it could be achived with FISO (the idea behind map sw is just a switch that increases the max boost levels and allow higher map cels not another map ,dispite that would be even better)
Can anyone help me with the fórmulas , I've tried to understand how to but some help is very welcome !
by atntpt
Thu Apr 11, 2019 1:52 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

Sooo , after back long Time I got the board to work , I mean Andreika did :) many thanks to him who spend his time to take a look at my board ! The problem was firmware compilation . Plus some bad soldering he found! :) After receiving the board I noticed that setting wasn't saving so, again thanks ...
by atntpt
Sun Apr 07, 2019 11:42 pm
Forum: Dev: Hardware
Topic: microRusEFI
Replies: 388
Views: 515600

Re: microRusEfi

I was planning to use mega and speeduino but already made some changes and replaced for stm. Very early stages !
by atntpt
Sun Mar 24, 2019 10:51 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

Just a couple more photos :)
by atntpt
Sat Mar 23, 2019 7:44 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

great thats working!! :D
about launch anything i can do?
by atntpt
Fri Mar 22, 2019 7:52 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

Baro sensor setting wasn't TS available, thank to Andreika direction I was able to add couple line to ini and it's now configurable
by atntpt
Fri Mar 22, 2019 6:46 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

I think something like map=(map/baro)*100
I have some cars I can use as test mules :) launch isn't I think I find useful ether but people seams to love pops and bangs for no reason ahahahhaha .
by atntpt
Fri Mar 22, 2019 12:41 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

the equation is very simple (MAP/Baro)*100 = % Load i guess the implementation not that much but it would be great to have it
by atntpt
Fri Mar 22, 2019 12:34 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

oh :( okay there is any way to put a bounty on some features? like baro and launch?
by atntpt
Fri Mar 22, 2019 12:23 pm
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

TKANKS!
about baro correction, i only was able to find the table on console not on TS plus i cant set sensor specs, can you help with that?
EDIT: ok found the table why is it only active on Speed desity? plus still unable to set sensor values
by atntpt
Fri Mar 22, 2019 1:40 am
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

Crank offset is already defined , I was really asking about Camshaft "sync" signal to run sequencial. Original trigger uses something similar to Nissan CAS but was removed . So crank is defined with correct offset and working the question was if there is any rule to CAM sync signal in degr...
by atntpt
Wed Mar 20, 2019 2:38 am
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Re: Fiat Coupé 16v Turbo

This one is like new !
by atntpt
Wed Mar 20, 2019 2:05 am
Forum: You and your build
Topic: Fiat Coupé 16v Turbo
Replies: 18
Views: 12131

Fiat Coupé 16v Turbo

This boy will be soon running on DIY frankenso :) Fully rebuilt engine as well as everything else in the car.
Simple question, I'm using 60-2 with 1 tooth sync cam , can that cam tooth be anywhere on the engine phase or has to be in a specific place ?
by atntpt
Fri Mar 08, 2019 12:59 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

bluetooth module was configured previosly. but i was hopping that a ftdi adapter on tx and rx pads of BT might connect because i was afraid of cp2101 . tried to connect a osciloscope to tx and rx but comunication stops serial stops showing that stuff So it seems that Prometheus is constantly sendin...
by atntpt
Fri Mar 08, 2019 12:30 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

https://youtu.be/mF3qs0HnfM8 video trying to explain bluetooth module was configured previosly. but i was hopping that a ftdi adapter on tx and rx pads of BT might connect because i was afraid of cp2101 . tried to connect a osciloscope to tx and rx but comunication stops serial stops showing that st...
by atntpt
Thu Mar 07, 2019 10:52 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

firmware was compiled by rusian! https://rusefi.com/build_server_prometheus/ this link i guess its okay.
i can obseve some wierd stuff going on on serial monitor.. i thout might be related to cp2101 so solderd some wires to tx rx pads on BT module to a ~ftdi adapter and the resut was the same