rusefi.com

This is not "my" board .. it will be purple or "UA" blue-yellow board ... I have two "UA" bards, and it works fine, without OpenBLT ... 1st is in the MINI - https://rusefi.com/forum/viewtopic.php?f=2&t=2249 2nd "in my car" or "on my desk" ... ..a...

actual stable build w/o openblt - http://89.173.96.22/dohc/rusEFI/rusefi.bin.mre.noopenblt.20230204

Two new OPAmps are used for VBatt sense ..??

(and now you have one opamp unused, it can be used for Analog-Out ..? )
(but F072 is required)

...the world's first dualcore MRE in ALU case...

..working on a new version of this board....

...it's there ..

two boards waiting for F427VGT6 mcu ...
To mck1117:
Can I ask for any test results .?

"My" Proteus with "KORean" mcu has the same problem as MRE with "MYS" one

updated gitub content ...

https://github.com/JRDMcLAREN/hw_microRusEfi

Only 3 boards with "suspected" MCU are out of me... in the world... stayros32001 and M.Matousek have these boards. But it looks, that all F407VGT6 MCUs from MYS (Malaysia) have problem with Openblt. @stayros32001 - would you check mcu on your's boards .?? old - burned one ... and working o...

Board revision is on the back but at least I see microUSB and that says old board :) I have already disassembled all microUSB for spare parts. Here is a random 0.5.2 which works fine. Until https://github.com/rusefi/rusefi/issues/4847 I was sure that all chips are the same. Well, https://github.com...

SAME SAME .... , BUT DIFFERENT .... I suspect that the problem is in different MCU revisions - country of origin ... I can put this board on the plane to EU on Dec 23rd. OK, you need my address ..?? BTW: Original STM32F407-DISC1 with F407VGT6 "MYS" has problem aprox. 4y old, bought from TM...

Would you can flash this "your old official board" please ... ?? if you have one .. (or somebody else - mck1117 .. ?? :?: ) https://rusefi.com/forum/download/file.php?id=7891 https://rusefi.com/forum/viewtopic.php?p=41521#p41521 it has "MYS 99" mcu - the same as my. one dot on le...

I have to be blunt and harsh: you have my permission to do anything with the firmware within license. maybe another question ... Is stm bootloader in source code .. or not ..?? I'm never compiled custom firmware before.... At the moment I see clear correlation between custom microRusEFI hardware an...

as we discuss here: https://rusefi.com/forum/viewtopic.php?p=46765#p46765 some MCUs / MREs have problem to start after fw upgrade, due to OpenBLT. last working version is 20220703 - without OpenBLT I'm try to flash "all my boards" with STM32F407VGTx as I can.. I have boards with MCU from M...

...YES ...

TLE8888-QK vs. TLE8888-2QK ... maybe ..

I have the same series on my boards ...
AndreyB probably too ...

stayros32001 both boards have the same MCU series .. ?? (from Malaysia) ..

EDITED:
hmm AndreyB's old one has the same MCU rev.
https://rusefi.com/forum/viewtopic.php?p=41521#p41521

stayros32001 would you can make photo of "both" MCU ..??
if you still have "old burned" board ... and actual one ..

(old one may have "pre-covid" MCU, bought from TME)
(try to flash it ... )

AndreyB you have "my UA" version ...
and stayros32001 you have "purple" ..??

it have TLE8888QK from Digikey
STM32F407 VGT6 from Mouser - desoldered MCU from Mikroe EasyMx Pro v7 board

20220422 works
20220703 works
20220812 not - tested twice
20220914 not - tested twice


programed via STLINK ...

last release ended with RED FATAL, no serial port...

..OK .. I'm here ...

Now I have two boards ..and I can test FW update ...

..wait ...

MRE has no hardware for knock sensor ...

..but it will be good idea, to do it on this ....
https://rusefi.com/forum/viewtopic.php?f=4&t=2215&start=30

I have some addon boards for sale ...

Now we working on two injectors (siamese ports) on 5 port head.
We need full seq, so we have CAM sensor mounted in old distributor..

I can give it to you ....
and then we can compare and merge my repo and official repo ....


..I'm still waiting for few ICs ...

...probably the last MRE from me ...
..at this time ....

will this help ..?
it is short log from "default position" to fully closed.

I can make full log by the next week ...

https://rusefi.com/online/view.php?log=893

actual tune is here ... https://rusefi.com/online/view.php?msq=1066 (I'm forgot write link) Car is't at my workshop now, it's hard to test something at this moment. We have short video on friend phone, I can upload it .. "somewhere" .. I have one idea. Can I calibrate TPS manualy from &quo...

Stock Renault ECU drive Idle with this ETB from 5% opened to 0% reversed polarity on motor wires
..and accelerate from 5% to 100% - normal polarity on motor wires

PPS 0-100% = TPS 5-100%

I have a problem with ETB and I need help ... It is RENAULT ETB (see pic) and they "default" position is aprox. 5% opened without power. It can be fully closed "by hand" or by electric motor inside. ETB Auto Calibrate can reach WOT and full closed state, calibrate analog inputs v...