Search found 102 matches

by atntpt
Thu Mar 07, 2019 3:40 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

it was a falty stm.. now back on track ... so connection is stablished (only without nrst wire if with nrst only hotplug mode... if conectod led turns slitly on, nrst pullup is 10k .. ) anyway i think i was able to uplod the hex , and if i hit connect im able to see it.. no connection via usb nor bl...
by atntpt
Tue Feb 05, 2019 10:12 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

I think that's okay
by atntpt
Tue Feb 05, 2019 5:24 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

puff wrote:
Tue Feb 05, 2019 5:20 pm
have you disconnected the onboard chip on the discovery board? (there are some jumpers powering the board-native stm chip from stlink)
i did! jumpers are out
by atntpt
Tue Feb 05, 2019 4:53 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

so caps are on! same behavior, any ideas?
by atntpt
Mon Feb 04, 2019 9:55 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Re: Prometheus atempt

You're right, I was anxious ! They arrive tomorrow. Do you think that's what is wrong with it ? Isn't strange 2.5 v at swdio ?
by atntpt
Mon Feb 04, 2019 9:26 pm
Forum: Dev: Hardware
Topic: Prometheus atempt
Replies: 19
Views: 13722

Prometheus atempt

Hi as many of you know im trying to assemble a Prometheus from @andreika . Current status is: - all components on board except for some small caps 2.2uF - com port is recognized in PC so cp2101 looks OK - powering from 12v both 5v and 3.3v rails are OK (current is ~50 mA) - swdio led is always on (a...
by atntpt
Mon Feb 04, 2019 6:54 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Don't know if should or shouldn't continue the questions here on on software but here it goes. Short is solved. I think everything else is okay. Connected Discovery to the board header triple check the pinout tried to connect on stlink and wasn't able. The led is doing something I recon just don't k...
by atntpt
Sun Feb 03, 2019 1:00 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Thanks!! Unfortunately I have a short between 3.3 rail and GND and can't find where. Will say something when able to find the problem. :(
by atntpt
Fri Feb 01, 2019 11:03 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

anyone willing to share the compiled firmware, struggling with compilation :C
by atntpt
Wed Jan 30, 2019 12:30 am
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Please forgive me if I am out of context, I could be out of context. By the way I can make continues build for this board if so is desired since I have a build server anyway. Custom builds would be great !!! For both CPU even better. :D I'm currently using 405 because I can't find 469 and isn't any...
by atntpt
Tue Jan 29, 2019 11:28 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Could you write a simple explanation in how to upload the firmware and what jumpers sould be set ? Yeh I know it's simple but I'm kind of (much) noob with this. I understand it should be something similar to what russian is doing with the small Chinese board , since I own a discovery and that's how ...
by atntpt
Tue Jan 29, 2019 8:21 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

I'm still waiting for 2.2 uf and .1% 1k everything else is just a matter of time
by atntpt
Tue Jan 29, 2019 5:36 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Haven't uploaded the firmware yet although , bit afraid ahah. Maybe I will need some help, inglish isn't my main language and some technical stuff are difficult to understand. But will give it a try!
BTW how many known Prometheus running ? And what cars ?
by atntpt
Tue Jan 29, 2019 12:03 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

I'm kind of addicted to this board :mrgreen: isn't easy specially The tiny tiny D30 lol
by atntpt
Fri Dec 14, 2018 3:44 am
Forum: Dev: Software
Topic: How to compile the firmware
Replies: 135
Views: 717758

Re: How to compile the firmware

Yup missed that, did some search and was able to clone git via command line and update submodules somthing went wrong tho.. error 1..
but about the second question? is the firmware compliled for the board ? and how to select a target board to build for
by atntpt
Fri Dec 14, 2018 2:14 am
Forum: Dev: Software
Topic: How to compile the firmware
Replies: 135
Views: 717758

Re: How to compile the firmware

Hi guys, I'm having difficulties with the firmware part. my English is somewhat limited and when it comes time to understand more technical things I have some difficulty. and first of all I am not being able to compile the firmware, I think I already have everything installed. this appears"Make...
by atntpt
Sun Dec 09, 2018 10:28 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

how does starter blocker works, i mean from what i understand trigger the starter motor?!?? but whats the input? and how do i configure it in software? For starter blocker you may use FSIO, it's very flexible! For example, just set this expression (in reverse polish notation): rpm cranking_rpm < in...
by atntpt
Thu Dec 06, 2018 3:27 pm
Forum: Dev: Software
Topic: launch control
Replies: 100
Views: 98418

Re: launch control

mck1117 wrote:
Tue Mar 06, 2018 9:06 pm
I implemented some of this back in December. Let me see what I can do.

Did you get a chance to see anything about it?
by atntpt
Thu Dec 06, 2018 12:36 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

how does starter blocker works, i mean from what i understand trigger the starter motor?!?? but whats the input? and how do i configure it in software?
by atntpt
Thu Nov 29, 2018 3:13 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

do you have any assembled board to sell?
by atntpt
Thu Nov 01, 2018 3:15 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

There are only gerber files available (see above), sorry. There's almost no free space left on the pcb for additional components (taking into account that we should stay away from those high-voltage traces and BIPs). About staying away from the BIPs makes sense, but since the TC is an alternative t...
by atntpt
Wed Oct 31, 2018 12:40 am
Forum: Dev: Hardware
Topic: ATLAB X5- MX5 PNP
Replies: 9
Views: 7165

Re: ATLAB X5- MX5 PNP

litle update
by atntpt
Tue Oct 30, 2018 8:22 pm
Forum: Dev: Software
Topic: magneti marelli trigger pathern
Replies: 6
Views: 5050

Re: magneti marelli trigger pathern

Actually done, this one was easy. You can download latest firmware, create new project and there will be another item on the list. Thank you very much for the speed with which you created the decoder. Did you notice that there are 2 different signs? the crankshaft signal is a wheel with 4 teeth and...
by atntpt
Tue Oct 30, 2018 8:18 am
Forum: Dev: Software
Topic: magneti marelli trigger pathern
Replies: 6
Views: 5050

Re: magneti marelli trigger pathern

russian wrote:
Tue Oct 30, 2018 12:00 am
You cannot just apply settings without changing the code but I can change the code for you.

Can you please tell me more about this trigger pattern? What vehicles have used it? What years?
It's Fiat /Lancia IAW P8 from the 90' from 2.0 16 v turbo engine my specific car is a Lancia Coupe
by atntpt
Mon Oct 29, 2018 3:03 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Was thinking to change because I'm afraid initial stage might cause the coils to fire at the moment you turn on the key.
Ghetto solution for that this board will fit on top of so14 instead of the buffer and route signal thru the tc's :)
by atntpt
Mon Oct 29, 2018 1:16 pm
Forum: Dev: Software
Topic: magneti marelli trigger pathern
Replies: 6
Views: 5050

magneti marelli trigger pathern

hi, can someone help me to figure out the settings, if possibele, to make this pathern work?
by atntpt
Mon Oct 29, 2018 12:15 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Thanks ! Maybe i could replace with a non inverting buffer ? Is the pcbs file available somewhere ? A suggestion would be have the option to popolete the BIP part or an alternative with 2 4427 since some coils need some more courent than the buffer can supply .
by atntpt
Sun Oct 28, 2018 2:53 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

I think it supports 4x individual ignition coil ... Do you looked at the first page of the specification ... I know it does, maybe I'm not making myself clear, there are to main kinds of coils , those who need a big igbt and others that have an internal ingtor. This board looks like is designed for...
by atntpt
Sun Oct 28, 2018 1:33 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Abricos wrote:
Sun Oct 28, 2018 1:28 pm
I think if you post correct models of coil it will be more better ...
06E905115F are r8 coils for example
by atntpt
Sun Oct 28, 2018 1:16 pm
Forum: Dev: Hardware
Topic: Prometheus - NEW compact ECU shield!
Replies: 160
Views: 181230

Re: Prometheus - NEW compact ECU shield!

Ingnition coils that work with 12v or 5v signal and don't require those big BIP .. like VAG coils or Toyota coils on plug