Hi rusEFI,
How can I know he Ignition degree adjustment, if it working or not?
I mean the feedback from ignition working status or responsible.
Related in this image, below.
Thanks,
Mr.X
Search found 174 matches
- Mon Sep 08, 2014 9:51 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
- Sun Sep 07, 2014 11:17 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
We can set the IDL ?
- Sat Sep 06, 2014 5:34 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I will try to test itrussian wrote:Duration is controlled in this window
http://i.imgur.com/5TLBNV2.png
No idea on timing I know that on regular gasoline something between 10 degree before TDC and TDC is the base value
- Sat Sep 06, 2014 2:26 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Are you trying to set timing to 30 degree before top dead center? Because the table does not control the dwell (signal LENGTH = currently 4ms) but it controls the signal POSITION (30 degrees) Default 4ms and default zero timing should be good enough to start the car. I demand some pictures of your ...
- Sat Sep 06, 2014 11:57 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
russian wrote:Did you set trigger to Miata NA? Please give me a new log file
Test change Injector table not work.
- Sat Sep 06, 2014 4:42 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Let you see in the link below... http://1drv.ms/WouTjX I've looked at the logs. The 1.6ms and 4ms ignition dwell is related to trigger event angles we have hard-coded for Mitsu. This trigger shape seems to be shared with mazda miata NA, Miata NA has more precise values defined. Please try setting t...
- Fri Sep 05, 2014 4:46 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
russian wrote:the problem with 1.6ms dwell and 4ms dwell is still an open problem, the new rusefi.ini does not address it - that is the reason I am asking for a dev console log file
Hi rusEFI,
Let you see in the link below...
http://1drv.ms/WouTjX
Thanks.
- Fri Sep 05, 2014 2:49 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
New rusefi.ini available I will test it
If there are problems, I will send the results to you
If there are problems, I will send the results to you
- Fri Sep 05, 2014 2:21 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Sorry i meant the TPSrussian wrote:TDC=TopDeadCenter. TPS=ThrottlePositionSensor. I think you mean TPS?
Now I understand, the blue dot is not where it should be. Give me a second to try something.
- Fri Sep 05, 2014 1:40 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I think I have just fixed the issue where 0.6ms would become 6ms and 0.3ms would become 3ms - scale was off. You would need only rusefi.ini Is this the issue you are having? Or is it something else? My problem is TPS 17%, but it shows the horizontal position 6. Not the way to the top. Have command ...
- Fri Sep 05, 2014 8:04 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Today test can change value 0-100this ok, but TDC 17% TS move o-6 only not work. 2014-09-05 14_57: EngineState: rpm=2270.00000 engineLoad=17.38317 2014-09-05 14_57: EngineState: baseFuel=3.00000 2014-09-05 14_57: EngineState: iatCorrection=1.00000 cltCorrection=1.00000 injectorLag=0.00000 2014-09-05...
- Thu Sep 04, 2014 8:06 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Have error message error fuelkeybin value 16 is too high must must be less than: 10
- Thu Sep 04, 2014 7:37 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
- Thu Sep 04, 2014 7:18 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I ues fuel E85 now for test.russian wrote:Perfect, now I am completely confused. Your analoginfo does not show any 6 volts but you are saying your engine load is 6volts?
What is your current fuel algorithm setting? I have just updated the firmware, it now reports fuel algorithm in fuelinfo.
- Thu Sep 04, 2014 7:04 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
engineLoad=6.03290 is a bit unexpected, do you have 6 volts entering the sensor you are using for engine load? what does your analoginfo say? On your TunerStudio it shows that you have 40 set for values under engine load 2.90, but you now have 6. By the way what are we dealing with? Is this a simul...
- Thu Sep 04, 2014 2:26 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I see two questions here, let's solve them one by one. First let's solve the fuel pulse width: What does your fuelinfo command tell you? 2014-09-04 21_20: CommandQueue: Sending [sec!8!fuelinfo] 2014-09-04 21_20: EngineState: confirmation_fuelinfo:8 2014-09-04 21_20: CommandQueue: got valid conf! fu...
- Thu Sep 04, 2014 7:54 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I set fuel 40ms in picture dev console show 6.02 ms
Why is there no change?
Spark1 4.02 and 1.62ms It's normal, right?
I do not understand.
- Thu Aug 28, 2014 7:50 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
What setting input pin on board?russian wrote:I've just added the dialog into Tuner Studio project - please download latest version
Your older firmware has the code already no need to update firmware.
We chose not to input pin.
- Thu Aug 28, 2014 6:10 am
- Forum: Dev: Hardware
- Topic: Thermocouple input?
- Replies: 54
- Views: 42052
- Thu Aug 28, 2014 4:40 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I have Innovate A/F meter can use analog signal output from meter? http://www.innovatemotorsports.com/support/manual/MTX-L_print%201.2.pdf http://www.innovatemotorsports.com/support/quickstart/mtxlquickstart.pdf This model have analog signal 2 output. Optionally, the YELLOW (Analog out 1) and/or BRO...
- Sat Aug 23, 2014 6:58 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Okrussian wrote:I've changed default LCD size to 20x4 and also made LCD size configurable via Tuner Studio. Give the build server 5 minutes to build and use the new TS project
Now, it works.
- Sat Aug 23, 2014 12:25 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Lcd problem now is if set_engine_type16 LCD display 2 line.
If ford aspire LCD display 4 line.
If ford aspire LCD display 4 line.
- Fri Aug 22, 2014 6:28 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I have just double-checked it and it seems to be working for me :( I guess first thing we should do is disconnect the RPM signal. Since we are trying to check PC4 and make sure the settings get saved, just turn RPM signal off while testing this? Please update to latest firmware and if you can write...
- Thu Aug 21, 2014 11:49 pm
- Forum: Dev: Hardware
- Topic: stm32f4discovery troubleshooting and repair
- Replies: 23
- Views: 20976
Re: stm32f4discovery troubleshooting and repair
Check all diodes
- Thu Aug 21, 2014 2:54 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I've added this into Tuner Studio Q&A http://rusefi.com/wiki/index.php?title=Manual:Software:User/en#Tuner_Studio_integration I have tried to to stop the engine. More than one time to be effective. Sometimes it will return back to value default. The tests burn have problem I can not set PC4, PC...
- Thu Aug 21, 2014 6:35 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
We have changed PC4,PC5 =fast in TS, but it will not change.
Every time a new connection is shown in Fig.
I just noticed.
I did not burn.
Every time a new connection is shown in Fig.
I just noticed.
I did not burn.
- Wed Aug 20, 2014 7:06 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Have you tested the op-amp circuitry hardware & soldering? I'd suggest you remove the MAP and the discovery and apply GND, 3v and 5v to the inputs and check that the outputs show the expected values (0, 1.5 and 2.5) I guess we need to put down some details of how to test the board with an op-am...
- Tue Aug 19, 2014 10:15 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
We test the pull up, pull down remove pull up, remove pull down. dev console (analoginfo) did not change, show 4.5V, pin PC4, PC5, the discovery show 1.65V by multimeter We have to change the IC LMV324IDR is the same as the INP1 and INP2 only. ADC15 PC5 rawValue=2.25054/divided=4.50109v ADC14 PC4 ra...
- Tue Aug 19, 2014 9:30 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
Do you need help with the physical setup? Basically suggestion would be to connect MPX 5V pin to FRK 5V, connect MPX GND pin to FRK GND, and choose your AN channel for the output. If you install a 470pF on your AN channel, you will follow the datasheet suggestion more precisely and presumed more ac...
- Tue Aug 19, 2014 9:18 am
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 240854
Re: Mitsubishi 4G63 and 4G92
I can use the map mpx4250 or not. How to set up is required. That's easy - just update to latest firmware & latest TS project and you will have http://i.imgur.com/s1hjoqq.png You do not need MAP to run & idle the car. Really looking forward first run :) it works I will add function Shift Li...