Search found 124 matches

by nmstec
Mon Jan 17, 2022 5:34 pm
Forum: Dev: Hardware
Topic: Alternative To BMW DI module, Duramax FICM
Replies: 4
Views: 5749

Alternative To BMW DI module, Duramax FICM

It appears as though 2001-2004 6.6 LB7 Duramax used in silverados 2500HD & more, is basically the same, however with the addition of having 8 Cylinder control. GM Part # 97720663 Bosch Part # 0281010014 Online they are ridiculous, but at my local junkyard im quoted $60 CAD. This may be a better ...
by nmstec
Mon Jan 17, 2022 3:22 am
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 49
Views: 77950

Re: Harley Requirements

by nmstec
Sat Jan 15, 2022 8:17 pm
Forum: Tuning Support: Making it Run
Topic: On v12 banks
Replies: 13
Views: 10020

Re: On v12 banks

Audi used Dual Bosch modules, and VW v10 touareg ditto on the MED bosch modules.
by nmstec
Sat Jan 15, 2022 12:54 am
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 49
Views: 77950

Re: Harley Requirements

Harley now runs well enough for dyno steady state tuning w/ proteus & handmade shitty adapter. Next step, finishing good adapter design, tuning, debugging, and prototype production time!

Will be working on adding TJR transceiver to the schematics tonight. Love you all.
by nmstec
Fri Jan 07, 2022 7:56 am
Forum: Dev: Software
Topic: STM Sleep/Stop/Standby
Replies: 2
Views: 2180

Re: STM Sleep/Stop/Standby

SD Card in AWAKE & STOP eats 7-8mA more.
by nmstec
Fri Jan 07, 2022 5:03 am
Forum: Dev: Software
Topic: STM Sleep/Stop/Standby
Replies: 2
Views: 2180

STM Sleep/Stop/Standby

Proteus R0.6 STM32F767. PA0 Wake-up No hardware modifications Running state 100mA Stop state 40mA StandBy state 30mA With CAN transceivers removed & Power LED disabled UNKWN With CAN transceiver replaced & Power LED disabled UNKWN With TLS208D1, CAN transceiver replaced & Power LED disab...
by nmstec
Wed Jan 05, 2022 7:30 pm
Forum: Dev: Hardware
Topic: Hellen 154 Hyundai
Replies: 15
Views: 35892

Re: Hellen 154 Hyundai

Norman, spoke to Andrey. Need to give you heads up. ECU will need to output AC Pressure, Coolant temp, and current AC status. I'll attach wiring diagram for you below. ECU on this car also reads ac pressure sensor. Voltage = 0.00878835 * Pressure + 0.37081095 [PSIA] image.png 0x132 Byte 0 = Vents By...
by nmstec
Tue Jan 04, 2022 9:26 pm
Forum: You and your build
Topic: Making my 190e More Fun (M111 Twincharged Swap) #57 [Hellen]
Replies: 103
Views: 88465

Re: Making my 190e More Fun (M111 SC Swap) #57

N75 is VAG boost Solenoid. It is a special type, hence why deserves its own designation.
by nmstec
Mon Jan 03, 2022 7:41 pm
Forum: Dev: Hardware
Topic: L9779WD-SPI - Multifunction IC for engine management system
Replies: 26
Views: 30321

Re: L9779WD-SPI - Multifunction IC for engine management system

AT - Automotive grade. 2 - no clue, double automotive?

L9779WDM - 4.9- 5.1v
L9779WD - 2.9 - 5.5v

But looking at that info, there is 0 mention from ST regarding those markings. I'm going with most likely either engineering samples, or Chinesium grabage. We shall discover jan 16
by nmstec
Sat Jan 01, 2022 12:20 am
Forum: Plug In Boards
Topic: Hellen88 ETB support
Replies: 26
Views: 29915

Re: Hellen88 ETB support

e36? I had done the same thing with removing the IAC and PCV, and plasma cut myself an ETB adapter to fit a vw rabbit ETB on an M50 intake. I can get you a parts list of it, but mines a big ridiculous since im turbo charging it.
by nmstec
Sun Dec 19, 2021 9:47 pm
Forum: User Support
Topic: rusEfi map: who is where? map in the first message
Replies: 101
Views: 151194

Re: rusEfi map: who is where? map in the first message

Just realized, Mike Hunt, BC Vancouver
by nmstec
Sun Dec 19, 2021 9:44 pm
Forum: Dev: Hardware
Topic: Hellen 121 ME7 for VAG PnP ECU
Replies: 80
Views: 56305

Re: Hellen 121 ME7 for VAG PnP ECU

I have ELSA. It's near completely useless for wiring. Good for locating junction points.
by nmstec
Thu Dec 16, 2021 5:49 pm
Forum: Dev: Hardware
Topic: Bosch vehicle accelerometers
Replies: 13
Views: 15113

Re: Bosch vehicle accelerometers

Found the info. Page 294: https://www.bosch-motorsport.com/media/downloads/catalogs/printkatalog_2020.pdf

Please note:
CAN ID0 0x0170 (Rx) is used for synchronization and configuration of the sensor (SYNC). Make sure that the CAN ID 0x170 is not
used in your can network by any other device.
by nmstec
Thu Dec 16, 2021 5:01 pm
Forum: Dev: Hardware
Topic: Bosch vehicle accelerometers
Replies: 13
Views: 15113

Re: Bosch vehicle accelerometers

MM5.10 box mold 1275100853 I would like to thank Mitch Minton for telling me that F037000002 specifically matches Acceleration Sensor MM5.10 datasheet open question if can-am 0265005955 or Mercedes 0009059101 send out same exact information anyone willing to donate $30 towards a 0009059101 sensor? ...
by nmstec
Thu Dec 16, 2021 4:56 pm
Forum: Dev: Hardware
Topic: Bosch vehicle accelerometers
Replies: 13
Views: 15113

Re: Bosch vehicle accelerometers

Subaru 27542AG011, Bosch 0 265 005 627 Silent after power on. While replies (ACKs) on other messages on CAN bus at 500K. Seems need some magic kick to power on? Consumes 100..110mA@12V. 1_YWqE_EMxE.jpg https://www.bosch-motorsport.com/media/downloads/yaw_rate_sensor_yrs_3.pdf Please get a databus l...
by nmstec
Thu Dec 16, 2021 6:01 am
Forum: Misc
Topic: ECU Master EMU - just for compare
Replies: 3
Views: 10740

Re: ECU Master EMU - just for compare

I mean, might as well call it speeduino with that slow ass non-arm POS
by nmstec
Thu Dec 16, 2021 5:22 am
Forum: Dev: Hardware
Topic: Hellen 121 ME7 for VAG PnP ECU
Replies: 80
Views: 56305

Re: Hellen 121 ME7 for VAG PnP ECU

To be fair the black dumpster is also parked beside red dumpster
by nmstec
Sat Dec 11, 2021 10:11 pm
Forum: Dev: Software
Topic: VAG DSG CAN support
Replies: 26
Views: 41782

Re: VAG DSG CAN support

DSG takes speed info from ABS unit MK60 ABS+ESP version, upon conversation instrument cluster also needs reflash in order to use signal from ABS unit for speed Trimis de pe al meu GM1913 folosind Tapatalk Not a real problem, you can get around it by pulling it out of ABS yourself, and sending it ou...
by nmstec
Tue Dec 07, 2021 5:44 pm
Forum: You and your build
Topic: 2004 BMW 760 N73 "A big mistake"
Replies: 198
Views: 206557

Re: 2004 BMW 760 N73 "A big mistake"

I don't know if this would help, but n52 also had those pressure relief valves with strainers on them (filters of sorts?) mine were fucking full of shit.
by nmstec
Tue Dec 07, 2021 5:12 pm
Forum: You and your build
Topic: 2004 BMW 760 N73 "A big mistake"
Replies: 198
Views: 206557

Re: 2004 BMW 760 N73 "A big mistake"

I had similar problem on n52. Fucking PCV failed, and I guess due to the engine shaking its ass off it kept throwing cam-crank correlation
by nmstec
Sun Dec 05, 2021 6:29 pm
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Re: Cylinder pressure to TDC system

Thats exactly what I have! but I used pipe tape!
by nmstec
Sat Dec 04, 2021 8:13 pm
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Re: Cylinder pressure to TDC system

JRD and then dont forget buy a lathe, and some pipe, and fabricate your own little adapter. Reason I havent posted what compression tester is because I rifled through a few to find the correct fitting, and got one with threads instead of latch .
by nmstec
Fri Dec 03, 2021 3:33 am
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Re: Cylinder pressure to TDC system

And heres rear cylinder being tested. 315. dead on.
image.png
image.png (141.78 KiB) Viewed 6794 times
by nmstec
Thu Dec 02, 2021 9:41 pm
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Re: Cylinder pressure to TDC system

Log: Keeping in mind phase is 50/50 hence the 5 start attempts. TDC Offset set to 0 for data reasons and due to bug
https://rusefi.com/online/view.php?log=457
by nmstec
Thu Dec 02, 2021 9:33 pm
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Re: Cylinder pressure to TDC system

image.png
image.png (122.95 KiB) Viewed 6818 times
image.png
image.png (121.14 KiB) Viewed 6818 times
by nmstec
Thu Dec 02, 2021 6:24 pm
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Re: Cylinder pressure to TDC system

2 hours tops it is not. m8 engine contains all oil there and im not drilling into the bike.
by nmstec
Thu Dec 02, 2021 4:02 am
Forum: Dev: Hardware
Topic: Cylinder pressure to TDC system
Replies: 14
Views: 6947

Cylinder pressure to TDC system

Just a placeholder, will add info tomorrow when we build it. Problem: Harley does not divulge ANY information, and majority of people working with them are pretty... Empty minded. Pickup ring is built into crank, which is completely blocked out from the world. Only reason we have info is because we ...
by nmstec
Mon Nov 29, 2021 5:14 pm
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 49
Views: 77950

Re: Harley Requirements

Engine temp sensor markings: "ETS" "32700054"
IMG_20211129_091200.jpg
IMG_20211129_091200.jpg (2.35 MiB) Viewed 28908 times
IMG_20211129_091212.jpg
IMG_20211129_091212.jpg (2.69 MiB) Viewed 28908 times
by nmstec
Mon Nov 29, 2021 4:34 pm
Forum: Dev: Hardware
Topic: MCU choice
Replies: 9
Views: 4404

Re: Re:

I don't think we need more flash addressable by the CPU, right? External flash is useful for logging, and providing burn-while-execute for MCU that don't have dual bank flash, but neither purpose needs memory mapped IO. Some users want switchable tables/tunes. With memory mapped flash there is no n...
by nmstec
Sat Nov 27, 2021 7:44 pm
Forum: Dev: Hardware
Topic: Harley Requirements
Replies: 49
Views: 77950

Re: Harley Requirements

Well, I fried low 12 output I think. ACR took up to 5amps... Fuck. gonna relay it on low 11 this time, and see if LUA works or not for pwm. If not, then LUA problem.