Search found 14334 matches
- Sat Sep 12, 2015 2:29 pm
- Forum: Железо
- Topic: Широкополосный лямбда зонд + контроллер
- Replies: 181
- Views: 345368
Re: Широкополосный лямбда зонд + контроллер
Даташит я пока не нашёл, но я нашёл вот такой пример кода - http://forum.arduino.cc/index.php?topic=144703.20;wap2 - и я вижу там что-то про ПИД управление нагревательным элементом. Так что есть вероятность, что нужно нагрев программировать самим?
- Sat Sep 12, 2015 2:18 pm
- Forum: You and your build
- Topic: Good morning from Islamabad, Pakistan
- Replies: 2
- Views: 3038
Re: Good morning from Islamabad, Pakistan
Welcome to the forum! I like the idea of students spending time testing and expanding rusEfi
- Sat Sep 12, 2015 2:16 pm
- Forum: Dev: Software
- Topic: wideband AFR sensor interface
- Replies: 21
- Views: 20081
Re: wideband AFR sensor interface
I've created a blank project & copied the schematics, looks like the CJ125 would need to be extracted into a separate file https://svn.code.sf.net/p/rusefi/code/trunk/hardware/CJ125_board/
- Sat Sep 12, 2015 4:05 am
- Forum: Железо
- Topic: Широкополосный лямбда зонд + контроллер
- Replies: 181
- Views: 345368
Re: Широкополосный лямбда зонд + контроллер
похоже без МК, она сама себе МК. См. http://www.ecotrons.com/products/wideband_controller_alm-board/Technoman wrote:CJ125 нагревателем управляет? Аналоговый вывод 0-5v есть или к ней ещё МК цеплять нужно для обработки?
- Sat Sep 12, 2015 4:03 am
- Forum: Dev: Software
- Topic: wideband AFR sensor interface
- Replies: 21
- Views: 20081
Re: wideband AFR sensor interface
Jared, do you happen to know who has created that schematics?kb1gtt wrote:KICAD draft schematic for CJ125 chip found here https://hardware.open5xxxecu.googlecode.com/git-history/unfinished-unreviewed/KICAD_Project/O2_input_CJ125.sch
As usual, it takes me two years to notice the cool stuff
- Fri Sep 11, 2015 8:34 pm
- Forum: Железо
- Topic: Широкополосный лямбда зонд + контроллер
- Replies: 181
- Views: 345368
Re: Широкополосный лямбда зонд + контроллер
А где вообще вариант на базе CJ125 от Bosch?
http://www.bosch-semiconductors.de/media/pdf_1/einzeldownloads/engine_management/CJ125_Product_Info.pdf
Кажется доступен из Китая
Обвязки чуть-чуть нужно, и вот готовый контроллер?
http://www.bosch-semiconductors.de/media/pdf_1/einzeldownloads/engine_management/CJ125_Product_Info.pdf
Кажется доступен из Китая
Обвязки чуть-чуть нужно, и вот готовый контроллер?
- Fri Sep 11, 2015 8:33 pm
- Forum: Dev: Hardware
- Topic: Wideband oxygen sensor module
- Replies: 14
- Views: 25148
Re: Wideband oxygen sensor module
Totally different option: CJ125 chip from Bosch http://www.bosch-semiconductors.de/media/pdf_1/einzeldownloads/engine_management/CJ125_Product_Info.pdf Seems to be available from China: http://i.imgur.com/286VHuk.png Pretty much self contained, how comes we did not consider it yet? http://i.imgur.co...
- Thu Sep 10, 2015 12:52 am
- Forum: Dev: Software
- Topic: launch control
- Replies: 100
- Views: 101309
Re: launch control
It would be tough without a car, at least you would need a discovery board with a couple of potentiometers to simulate sensors, or, probably a better option, you would need to add 'mock' clutch up/clutch down/VSS speed into the simulator the way there is mock voltage for analog sensors in simulator....
- Wed Sep 09, 2015 11:20 pm
- Forum: Dev: Software
- Topic: launch control
- Replies: 100
- Views: 101309
Re: launch control
Good info! Next step would be somebody actually implementing a first version
- Wed Sep 09, 2015 2:16 am
- Forum: Misc
- Topic: Honda/Acura K-series ECU tuning
- Replies: 4
- Views: 7240
Re: Honda/Acura K-series ECU tuning
Let's get rusEfi in good shape first Once that's a platform worth using, it would make sense to hack it to a K ecu board.efihacker wrote:Like i said i did not know where to start.
- Wed Sep 09, 2015 2:09 am
- Forum: Misc
- Topic: Honda/Acura K-series ECU tuning
- Replies: 4
- Views: 7240
Re: Honda/Acura K-series ECU tuning
I was playing with the same idea but for the Mazda ECU - traced a lot of wires etc. The killer in case of rusEfi is the fact that our stm32f4 chip is 3.3 volts, not 5v as it should be in an ideal world. It's a loooooong story, but for all the pros of stm32f* we have to pay with the 3.3<>5v bridging ...
- Wed Sep 09, 2015 1:58 am
- Forum: You and your build
- Topic: Hi! from Indiana, USA
- Replies: 5
- Views: 4580
Re: Hi! from Indiana, USA
Anyone doing anything with obd1 honda's? Curious how a/f maps from other software would convert into this setup... http://rusefi.com/forum/viewtopic.php?f=3&t=887 has the hardware but I believe he is still getting the car ready. Theoretically should be close, in reality you would be the one tel...
- Wed Sep 09, 2015 1:50 am
- Forum: You and your build
- Topic: Hi! from Indiana, USA
- Replies: 5
- Views: 4580
Re: Hi! from Indiana, USA
I think ill try to pickup a setup to run on my OBD1 honda and go from there. Is it correct that you guy are using TunerStudio for the software end of tuning? I have DIY kits which a cheaper - but the record is really bad in terms of 95% of buyers never assembling them to the end. It's about 300 com...
- Wed Sep 09, 2015 1:40 am
- Forum: You and your build
- Topic: Hi! from Indiana, USA
- Replies: 5
- Views: 4580
Re: Hi! from Indiana, USA
Long story short I'm Larry and I want to help make badass EFI stuff. Hey Larry, welcome to the forum! Too bad I've moved from Chicago like a year ago, we were on the same third coast! My Accord http://rusefi.com/forum/viewtopic.php?f=3&t=621 did NOT serve me well, but at least rusEfi is known t...
- Tue Sep 08, 2015 2:50 am
- Forum: Dev: Hardware
- Topic: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
- Replies: 77
- Views: 124277
- Tue Sep 08, 2015 12:56 am
- Forum: Железо
- Topic: Как тестировать датчик детонации?
- Replies: 47
- Views: 40567
Re: Как тестировать датчик детонации?
А свечи с аналогичным датчиком только измерительные бывают, они на конвеер случайно нигде не идут?
Measuring Spark Plug M14x1,25 - Kistler
Measuring Spark Plug M14x1,25 - Kistler
- Tue Sep 08, 2015 12:42 am
- Forum: Dev: Hardware
- Topic: cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
- Replies: 77
- Views: 124277
cheap cylinder pressure sensor option - smart diesel glow plug with pressure sensor
Maxi has shared http://www.rusefi.com/forum/viewtopic.php?f=8&t=388&p=16466#p16464 a cool idea for cylinder pressure sensor option: modern diesel glow plugs have pressure sensor build into them. For example Audi A3 VW Golf Glow Plug w/ Pressure Sensor OEM BERU 03L 905 061 F Smart glow plug ...
- Tue Sep 08, 2015 12:38 am
- Forum: Железо
- Topic: Как тестировать датчик детонации?
- Replies: 47
- Views: 40567
Re: Как тестировать датчик детонации?
Спасибо! Нужно набраться смелости и просверлить ГБЦ.
- Mon Sep 07, 2015 2:50 pm
- Forum: Железо
- Topic: Как тестировать датчик детонации?
- Replies: 47
- Views: 40567
Re: Как тестировать датчик детонации?
Идёт ли речь про например "Audi A3 VW Golf Glow Plug w/ Pressure Sensor OEM BERU 03L 905 061 F PSG002"? Есть ли опыт вкручивания подобных в бензиновый двигатель?Maxi wrote:они стоят на дизелях...
на 100500 - у меня и тарировки есть.
А можно ли тарировки?
- Sun Sep 06, 2015 7:12 pm
- Forum: Прошивка
- Topic: обогащение смеси при нажатии газа
- Replies: 83
- Views: 77662
Re: обогащение смеси при нажатии газа
Вот так сейчас работает топливная плёнка. Без топливной плёнки - провал по оборотам при резком открытии КХХ, провал по смеси: http://i.imgur.com/9L52bnx.png и вот еще два раза то же самое: http://i.imgur.com/lMYN6FC.png теперь поставим коэффициент оседания 40% и коэффиент испарения 5% http://i.imgur...
- Sun Sep 06, 2015 2:04 am
- Forum: Железо
- Topic: PCM CHRYSLER NGС1 ver1,2,3 incl JTEC(w. TCM, ATX)
- Replies: 26
- Views: 69860
Re: PCM CHRYSLER NGС1 ver1,2,3 incl JTEC(w. TCM, ATX)
NGC 6 cylinder
- Fri Sep 04, 2015 1:16 am
- Forum: Прошивка
- Topic: Текущий прогресс по прошивке.
- Replies: 365
- Views: 375252
Re: Текущий прогресс по прошивке.
Новая команда
blipidle IDLE_POSITION DURATION_MX
например
blipidle 90 3000
открывает КХХ на 90% на 3 секунды. Команда полезна во время настройки обогащения ускорения.
blipidle IDLE_POSITION DURATION_MX
например
blipidle 90 3000
открывает КХХ на 90% на 3 секунды. Команда полезна во время настройки обогащения ускорения.
- Fri Sep 04, 2015 1:15 am
- Forum: Dev: Software
- Topic: Firmware developent status
- Replies: 499
- Views: 714626
Re: Firmware developent status
New command:
blipidle IDLE_POSITION DURATION_MX
for example,
blipidle 90 3000
would blip idle valve to 90% open for 3 seconds. This command is useful while tuning acceleration enrichment.
blipidle IDLE_POSITION DURATION_MX
for example,
blipidle 90 3000
would blip idle valve to 90% open for 3 seconds. This command is useful while tuning acceleration enrichment.
- Wed Sep 02, 2015 2:27 am
- Forum: You and your build
- Topic: 2003 Dodge Neon (#9)
- Replies: 109
- Views: 101397
Re: 2003 Dodge Neon (#9)
[video][/video]
- Sun Aug 30, 2015 8:12 pm
- Forum: You and your build
- Topic: Mitsubishi 4G63 and 4G92 (#6)
- Replies: 328
- Views: 244296
Re: Mitsubishi 4G63 and 4G92 (#6)
"change" or "new"?Tambralinga wrote:Pls change new config
Are we changing existing config or creating a new config so that there are two different Mitsubishi configs?
- Sun Aug 30, 2015 5:18 pm
- Forum: Dev: Software
- Topic: electronic throttle body control ETB
- Replies: 290
- Views: 414456
Re: electronic throttle body control ETB
Not rusEfi, not mine - just to save the cool links:
- Sat Aug 29, 2015 1:15 am
- Forum: You and your build
- Topic: Daimler Double Six (V12), 1995
- Replies: 15
- Views: 10660
Re: Daimler Double Six (V12), 1995
More like http://rusefi.com/forum/viewtopic.php?f=4&t=577ahmedalalousi wrote:is the KiKAD source available to make the board?
The page has all the links you need to order the boards @ OshPark
- Fri Aug 28, 2015 10:23 pm
- Forum: Прошивка
- Topic: обогащение смеси при нажатии газа
- Replies: 83
- Views: 77662
Re: обогащение смеси при нажатии газа
Для симметричных двигателей измерение давления должно происходить строго в интервале 1 сегмента (180-120-90 градусов). не понял, что именно имеется ввиду. обязательно измерять в каждом сегменте? (который 180 для 4 цилиндров и 120 для 6 цилиндров) или обязательно измерять внутри границ сегмента (т.е...
- Fri Aug 28, 2015 12:49 am
- Forum: Прошивка
- Topic: Текущий прогресс по прошивке.
- Replies: 365
- Views: 375252
Re: Текущий прогресс по прошивке.
Javaukr823f wrote:Программа настройки на С# пишется??
- Wed Aug 26, 2015 9:43 pm
- Forum: Прошивка
- Topic: обогащение смеси при нажатии газа
- Replies: 83
- Views: 77662
Re: обогащение смеси при нажатии газа
Сделал первую версию рассчёта топливной плёнки. Коэффициенты оседания и испарения пока просто две переменные, потом нужно будет сделать пару кривых для поправок по темрературам и еще чему-нибудь. float addedToWallCoef = engineConfiguration->addedToWallCoef; floatms_t suckedOffWallsAmount = wallFuel[...