rusefi.com

Hello Hello I too have taken the step and buy Frankenso kit .. But I admit that I should have read more in detail the wiki. The problem, it is already raised. And with the difficulties I encountered for construction, I can say that it is also the best way to understand a little operation. I used a l...

Just added EGT info into TS logs - https://github.com/rusefi/rusefi/commit/f2aa684aec4f8d7c8bfacfc5ae3e594915799238 Please let me know what other gauges are not getting into the log and I will add As you ask me I also noticed that it's also missing Ignition advance IAT correction Knock count Knock ...

let's spin off a new topic! so what do we expect to see in that hipinfo command? basically, we need some sort of explainer, containing thorough and complete information about the knock phenomenon itself, about setting up knock detection part of rusefi (both, software- and hardware-wise). 1. On a fo...

New topic from: https://rusefi.com/forum/viewtopic.php?f=5&p=29219&sid=4cc9fa7214bbe5c825a965e9196946c2#p29219 let's move into some knock-related topic or start a new one? What does hipinfo command say in rusefi console? To answer your question This is my hipinfo why the last firmware "...

Just added EGT info into TS logs - https://github.com/rusefi/rusefi/commit/f2aa684aec4f8d7c8bfacfc5ae3e594915799238 Please let me know what other gauges are not getting into the log and I will add Thank you for these quick changes. I'll test tomorrow if it works and I'll tell you. I will also try t...

Hello, I finished building my rusefi and I installed the 4 EGT modules. And it works, it's beautiful. It's accurate and fast. I don't know if this is a subject already mentioned. I'm mounting my rusefi ecu on a car. I tried to do tests on logs, and I noticed that some information on the gauges are n...

Hi,
I do not know if it helps.
But I found a picture on another forum.
It's just an extra track I think.
http://s42.photobucket.com/user/TheSilverBuick/media/Skylark%204/Flatshift%20-test2_zpsvmuvimbm.png.html

Brought over from here https://rusefi.com/forum/viewtopic.php?f=2&t=1367&start=22 In that thread we have this description of what this fear request is all about. The tl;dr is that when the clutch pedal goes in, the ECU cuts fuel/spark so you don't have to lift off the accelerator. Then, whe...

A typical set of cheap 0805 parts on eBay has the following values 1 pF 3.3 pF 4.7 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 22 pF 33 pF 47 pF 68 pF 100 pF 150 pF 200 pF 220 pF 330 pF 390 pF 470 pF 560 pF 680 pF 1 nF 1.5 nF 2.2 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 15 nF 22 nF 33 nF 47 nF 56 ...

One question, I would like to know if LC & NLS work? No launch control, not sure what NLS is is. I am a road racer myself so my own focus is on that. Hello It's a shame for me. On track I can understand that the LC is not so useful. But the NLS (no lift shift) would be more than useful. For me ...

No reason, will change limit to 500kpa :) Thanks a lot... https://github.com/rusefi/rusefi/commit/ee3e6c1eaf53b97cfc2266a974075d6e777280da I will try soon Peugeot 1.6 16v with gtx3071r for dragrace. Hop more than 450hp for the moment. Pics & video soon One question, I would like to know if LC &...

Abricos wrote: ↑

Fri May 04, 2018 6:20 pm

What is your MAP sensor maximum pressure hold ???
Model of your MAP sensor ??? PDF !!!

Hi, I have this one MPXH6400 => 400 kpa
For this race car, I will try 340 or 350 kpa

Hi,
I take this post to ask a question.
What is the maximum pressure that rusEFI can handle?
Because I am preparing a car file for drag, and I am aiming for a maximum turbo pressure of 340 to 350kpa.
But I do not understand why I can not put values above 300kpa

My question to Andrey and/or other developpers Sorry for these stupid question Can I ask you something I discovered your project 1 year ago, but I decided today to work with more then 4 cars with the rusEfi (for this moment). Could you tell me about the history and also your goal in the short or lon...

Abricos wrote: ↑

Sun Apr 22, 2018 1:38 pm

what kind of experience are you talking about ???

Exprerience with vvt tuning his settings (solenoid frequency, PID, etc...).
Possible to exchange datas between ms3x & ruefi via canbus (sorry for this question)

Who have experience with vw vr6 24v engine with vvt?

kb1gtt wrote: ↑

Sun Apr 22, 2018 10:28 am

There are also connector boards similar to this. Would a ECU harness connector breakout board be of use?
https://rusefi.com/forum/viewtopic.php?f=4&t=1303&p=27823

Perhaps... let me check.
But really nice looks good.
Thanks

russian wrote: ↑

Sat Apr 21, 2018 5:21 pm

What is your plan for connecting the board to harness - are you soldering wires to the board or do you have VW ECU side connector? How many pins on the VW connector?

I will use oem ecu box...
No need to buy connectors for the moment
Wire to pin

https://www.tindie.com/products/russian/frankenso-diy-kit/ PS: if in doubt of SMD soldering, including fine-pitch SMD soldering, I strongly recommend considering fully assembled boards. Over 75% of kits are never assembled. I understand. But when I go soldering it's easier for me to immerse myself ...

russian wrote: ↑

Sat Apr 21, 2018 4:36 pm

Leaving country for 10 days in Monday morning so you want to order now or wait two weeks

Why Frankenstein and not Frankenso?

For now i'm ready to buy these kits from you
Can't wait 2 weeks. My friend have his dragrace soon

russian wrote: ↑

Sat Apr 21, 2018 4:36 pm

Leaving country for 10 days in Monday morning so you want to order now or wait two weeks

Why Frankenstein and not Frankenso?

Just for DBW & to try other fonctions, and try the implementation via can bus & ms3x

kb1gtt wrote: ↑

Sat Apr 21, 2018 3:13 pm

Is that a 2.0T with the direct injection an drive by wire?

It's a vr6 3.2L 24v with BW turbocharger s476sx 76mm ID with drive by wire 90mm from Audi S4 v8 engine

russian wrote: ↑

Sat Apr 21, 2018 2:38 pm

Lyonz wrote: ↑

Sat Apr 21, 2018 2:02 pm

Frankenstein for me.

But why?

For drive by wire and more

Are you looking to get assembled or kits?

Kits

Welcome along. Have you found the wiki? Just in case you have not, here's a link you might find interesting. https://rusefi.com/wiki/index.php?title=Manual:Hardware_Frankenso_board Yes of course... I'm going to buy 3 Frankenso (1 for Peugeot 1.6 8s turbo & the others for Peugeot 1.6 16s turbo d...

russian wrote: ↑

Sat Apr 21, 2018 11:22 am

Welcome to rusEfi

Thanks a lot

Hello, My name is Lyonnel, i'm french ... I live in Guadeloupe, a French island in Central America. I'm glad to enter the world of rusEfi to work on something other than ms. I already have 3 cars that I had to install in microsquirt but with what I saw of these projects, I would install rusEfi ;) Ly...