rusefi.com

Ok,
I can use the map mpx4250 or not.
How to set up is required.

Thank you.

new dev console have error update 17-08-2014

Not according to tpsinfo and analoginfo. Is it connected to the right input line? analoginfo should show different values for pedal on and pedal off and it does not now. Yes ,input line PC4 input voltmeter 2.24 pedal off , 0.08 pedal on INP1 = PC5 same symptoms INP2=PC4 Test TPS INP9 @ PA0 ,OK peda...

pedal off? TPS ADC14 PC4 rawValue=2.25054/divided=4.50109v pedal on? TPS ADC14 PC4 rawValue=2.25714/divided=4.51428v Seems like pressing the pedal on the car does not change the voltage on the TPS wire? Check your wiring, the voltage should change if you press your pedal :) TPS wire pedal off = 0v ...

analoginfo off 2014-08-15 21_24: EngineState: TPS ADC14 PC4 rawValue=2.25054/divided=4.50109v 2014-08-15 21_24: EngineState: CLT ADC6 PA6 rawValue=2.31428/divided=4.62857v 2014-08-15 21_24: EngineState: IAT ADC7 PA7 rawValue=2.26813/divided=4.53626v 2014-08-15 21_24: EngineState: MAF ADC15 PC5 rawVa...

What do analoginfo and tpsinfo show with pedal ON and pedal OFF? TPSINFO OFF 2014-08-15 14_48: EngineState: FAN relay: OFF 2014-08-15 14_48: CommandQueue: Sending [sec!7!tpsinfo] 2014-08-15 14_48: EngineState: confirmation_tpsinfo:7 2014-08-15 14_48: EngineState: tps min 193/max 704 v=4.46593 @PC4 ...

Today we test the TPS INP2 can not use it, but can use it in other input. I do not mind what happens Agent. INP2 throttle position sensor n/a pull-up,500K pull-down (adc3 PA3) http://www.evotuners.net/forums/f23/throttle-positon-sensor-adjustment-662/ picture http://www.ebay.com/itm/Throttle-Positio...

russian wrote:These values are common, technically we need three points so I would assume 18KOhm @ -20C

Ok

I had change new one Coolant Temperature for original part - MD-182467. It have spec like below. Temperature Range: 25 °C Resistance: 2080 Ohm Temperature Range: 80 °C Resistance: 294 Ohm http://www.rexbo.eu/hella/coolant-temperature-sensor-6pt009107121?c=100334&at=3130 New firmware set ignition...

I was test the latest firmware (20140811), But the some GPIO like PC3,4,5.. disappear in the list of TS like below image. You are looking at ADC input pins, not any GPIO pins - so it is NOT a bug that PC3 is not there. There are only 16 pins which we can use for analog input. What was a bug was tha...

I was test the latest firmware (20140811), But the some GPIO like PC3,4,5.. disappear in the list of TS like below image. You are looking at ADC input pins, not any GPIO pins - so it is NOT a bug that PC3 is not there. There are only 16 pins which we can use for analog input. What was a bug was tha...

I've just fixed the "error after TS burn" bug, please update to latest firmware (20140811) Also some TS improvements - please create a new project using latest rusefi.ini Hi rusEFI, I was test the latest firmware (20140811), But the some GPIO like PC3,4,5.. disappear in the list of TS lik...

I am still at the race but I should be back online this evening. As far as I know, FRK USB is totally fine. Please check your soldering? The issue I usually had was soldering on the USB connector, to test it I've cut a USB cable so that I can check continuity from black-red-green-white wires to the...

PC10, PC11Usb connect to TS OK,
FrankenUsb cann't connect TS.

I understand you are now getting an accurate RPM is that correct? About TS, can you tune at all? Is the issue that you have to stop the engine when you make an adjustment, or is it that you can't connect? When you get something like RPM working, can you post some kind of a quick note? Both russian ...

Hi rusEFI,
Could you please explain to me, How to jump or wiring for FT232RL .
I got some problem like this.

Thanks,
Mr.X

This model engin F22 or H22 ?

Hi Andrey, new firmware rusefi_firmware_not_sure> 06-Aug-2014. Update logs for SPARK testing, continued from yesterday. http://i.imgur.com/JN66bBb.png And the logs, below... https://docs.google.com/file/d/0B2_tOJp8KD51cXpIRTc0NUFMVjg/edit In TS can't tuning on real car online, the Engine should be s...

Is that the right log file? This one has Ford Aspire all over it. Did you try executing "set_engine_type 16" command in dev console? You need to put it into the command and hit Enter. Once you do that, there probably will be a red LED. Once you restart & reconnect, you should see Mits...

I've implemented the code for you trigger. It has 2 teeth on the inner wheel by the way. You should be good to start this car :) 1) update firmware 2) read about http://rusefi.com/wiki/index.php?title=Manual:Engine_Type 3) in dev console, execute set_engine_type 16 - this would change all values to...

http://i.imgur.com/yj89HhY.png Very good, we are one step closer! Can you please flip CAM1 and CAM2 wires now and record one more log? I will be back in an hour and work on putting the angles into the firmware. The signal with one signal should be PC6 and the signal with multiple signals should be ...

PS: according to https://docs.google.com/spreadsheet/ccc?key=0Arl1FeMZcfisdEdGdUlHdWh6cVBoSzFIbkxqa1QtZ3c pin PA5 is ADC channel #5, so you cannot use this ADC channel. Hi Andrey, I re-check The CAM2 now it appear, Could you please to see in the log like below. https://docs.google.com/file/d/0B2_tO...

russian wrote:

Tambralinga wrote:PA5 signal CAM

This one does not reach the firmware.

Hi Andrey,
Update logs from The latest Dev console below.

https://docs.google.com/file/d/0B2_tOJp8KD51NUJUQ1lmdFlnSDQ/edit

Thanks.
Mr.X

russian wrote:
That's probably the one on PC6. Where is your PA5 signal, the second trigger wheel?

PC6 signal crank
PA5 signal CAM

The results Engine logs form Dev console. http://i.imgur.com/Vij96OR.png http://i.imgur.com/30JSHc3.png T1T49971 http://i.imgur.com/w0NdGUs.jpg code CAS : T1T49971 And logs form Dev console. MAIN_rfi_report_2014-08-05 16_32.csv https://docs.google.com/file/d/0B2_tOJp8KD51WU0wTUNqc19lWWc/edit Thanks,...

I can change SPARK_2 to PC9 ?

Hi kb1gtt, Last time test by Skype. I have a question about the connection SPARK-1. If the SPARK-1 connect to High Drive, Is SPARK-2 connect to High Drive ? The coil in the picture, Could you please to explain me How to connect / how to use ? http://i.imgur.com/ZwahlJq.jpg and http://i.imgur.com/JoC...

Hi Andrey, I have some questions for configured port for SPARK_1 (Firmware Release on 29 Jul, 2014) I was test on Tuning Studio, Default configured as PC7=HIGH DRIVER 6. It dosen't work. I've just checked the default configuration (GND<>PD6 to reset config) and ignition0 is at PC7, so Tuner Studio ...

Hi Andrey,

The RPM result form FRK comparison with Defi .
I have tested of RPM to Mitsubishi 4G92 and connect to TS and Defi.
Please see result in the video.

[video][/video]

That is normal case or something wrong.
Thanks.
Mr.X

Hi Andrey, I have some questions for configured port for SPARK_1 (Firmware Release on 29 Jul, 2014) I was test on Tuning Studio, Default configured as PC7=HIGH DRIVER 6. It dosen't work. Please in attached. http://i.imgur.com/z9y9iwk.jpg But in the reference document like ... https://docs.google.com...