who wants to port to Power Architecture?

clcorbin
Posts: 8
Joined: Sun Jun 29, 2014 9:41 pm

Re: who wants to port to Power Architecture?

Post by clcorbin »

278 RPM 2900 pulse 317 uS variation with DIYAutotune sensor modified sprocket 317/2900= 10.9% jitter 1 degree of rotation takes 599uS. So that's about .5 degree accuracy.
Yeah. I could have EASILY seen 10% jitter on the scope. That's huge.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: who wants to port to Power Architecture?

Post by AndreyB »

Status update: this is on hold until we have a freeware compiler for this platform.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: who wants to port to Power Architecture?

Post by AndreyB »

As time goes new things are happening:

SPC5 MCUs overview page http://www.st.com/content/st_com/en/products/automotive-microcontrollers/spc5-32-bit-automotive-mcus/spc5-mcus-for-high-performance-applications.html?querycriteria=productId=SS1690 now mentions GTM (whatever it is) instead of eTPU on later SPC57 models.

Also there is http://www.st.com/en/evaluation-tools/spc57s-discovery.html which seems to be the first spc57 discovery board.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: who wants to port to Power Architecture?

Post by AndreyB »

russian wrote:
Sun Aug 24, 2014 3:52 am
Status update: this is on hold until we have a freeware compiler for this platform.
NXP has released the source code and binaries for the e200 GCC compiler with VLE extensions back in 2017. https://www.nxp.com/support/developer-resources/run-time-software/s32-design-studio-ide:S32-DESIGN-STUDIO-IDE?&tab=Design_Tools_Tab
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Post Reply