Powder Coating
Posted: Fri Mar 13, 2020 2:00 pm
There is https://www.harborfreight.com/10-30-psi-powder-coating-system-94244.html and they say Powder coat is diy easy and very safe.
They say you only need to get up to about 200 degrees C to cure the coat for low temp polyester powder.
However try to avoid high temp (250+) powder on aluminium as it can cause over ageing of the material (well, out case is not very structural anyway.
Maybe one day we can powder coat microRusEfi cases when we have nothing else to do
They say you only need to get up to about 200 degrees C to cure the coat for low temp polyester powder.
However try to avoid high temp (250+) powder on aluminium as it can cause over ageing of the material (well, out case is not very structural anyway.
Maybe one day we can powder coat microRusEfi cases when we have nothing else to do