rusefi.com

https://www.aliexpress.com/item/1005002348687142.html looks like stm32F071 stm32F071CBU6

The device above I should try with https://github.com/moonglow/pcan_cantact one day

Same guy has an F4 firmware at https://github.com/moonglow/vector_can and @dron_gus is trying it with https://rusefi.com/forum/viewtopic.php?f=4&t=381

AndreyB wrote: ↑

Mon Nov 22, 2021 2:47 pm

Same guy has an F4 firmware at https://github.com/moonglow/vector_can

Wow, this is really nice. I've worked with the VN1610 interfaces and CANoe, very nice stuff. Privately I use CANcardXL with CANoe
But, unfortunately the sources directory in his github is empty ut, unfortunately the sources directory in his github is empty It would of course be possible to just flash the firmware to a STM32F407/405 board and use it that way, sorce code would be very interesting too though.

Note to self - dump as received

Fun fact that STM32F071 STM32F071xB does not have USB nor does it have CAN peripheral?

https://www.st.com/resource/en/datasheet/stm32f071v8.pdf

TL,DR https://canable.io/ ecosystem looks dead

https://github.com/linklayer/cantact-app last update 2016 that one uses SLCAN (aka LAWICEL) text protocol on PC side
https://github.com/linklayer/cantact-fw last update 2017 official binaries did not work in my fake-ish adapter
https://github.com/HubertD/cangaroo last update 2017
https://github.com/normaldotcom/canable-fw/pull/9 has some scary comments etc etc

Only good news is that this adapter at least reads CAN with that 2017ish software

Great news https://github.com/moonglow/pcan_cantact/releases/download/v1.5/pcan_canable_hw.hex got me proper PCAN-View working!

https://caxapa.ru/1316037.html reports that those even cheaper ones work as well