Page 1 of 1

Getting accel enrich to function

Posted: Sun May 30, 2021 8:57 am
by Boostonabudget
thought id make a new post specific to ae just to aid in keeping things organized. i was informed to ignore the tps/tps table for ae and use wall wetting ect in the accel enrich page, not sure if i'm missing a setting ect but cant get any extra fueling or make any difference to the car going super lean and trying to stall. here are the last 2 logs and tune that include some pedal movement without any change that I've noticed. let me know if I've missed something or changed the wrong setting :)

https://rusefi.com/online/view.php?msq=538
https://rusefi.com/online/view.php?log=245
https://rusefi.com/online/view.php?log=246

Re: Getting accel enrich to function

Posted: Sun May 30, 2021 3:50 pm
by Simon@FutureProof
Dude, WTF?

Your requesting the ECU give 50ms extra fuel all over the place. It's no wonder the AFRs in your logs are totally haywire.

You have to find out what a setting does before changing them at random. There is a reason the TPS delta map is set the way it is as default.
image.png
image.png (54.91 KiB) Viewed 3787 times

Re: Getting accel enrich to function

Posted: Wed Jun 23, 2021 12:49 am
by Boostonabudget
Sorry it took so long for a response, I was taking a bit of a break due to frustration. The reason that tune said 50 everywhere is because it actually made 0 change in fueling. Didn't matter if I had the whole table at 0 or 100 it made no change to the afrs or how the car behaved. Its now at all 0 as well as wall wetting at 0 because I haven't been able to make either work.