Page 1 of 1
Cant import tune file to (megalogviewer)
Posted: Sat Jun 18, 2022 4:38 pm
by ELMEPRO
Hello, maybe anyone known why i cant import mycurrent tune .msq to megalogviewer?
I want use ve analyze
I can import other tunes from different ecu but not rusefi ecu tune
Re: Cant import tune file to (megalogviewer)
Posted: Sat Jun 18, 2022 4:42 pm
by AndreyB
I believe that we have already reported that issue to EFI Analytics
Re: Cant import tune file to (megalogviewer)
Posted: Sat Jun 18, 2022 4:45 pm
by ELMEPRO
Thanks to let me known!
Re: Cant import tune file to (megalogviewer)
Posted: Sun Oct 09, 2022 7:04 pm
by mx5newbie
Has anyone heard back anything concerning this issue? I upgraded to Megalogviewer HD just for the purpose of using the analyzer.
Re: Cant import tune file to (megalogviewer)
Posted: Sun Oct 09, 2022 8:08 pm
by AndreyB
Actually I do not have HD myself. Someone would have to start emailing EFI Analyitics
Re: Cant import tune file to (megalogviewer)
Posted: Wed May 24, 2023 10:03 pm
by Gadgethm
I also had this issue where MegaLogViewerHD was reporting that my files were coming in as "Version 2" and that it only supports "Version 1". Turns out, I was running v4.4.43 from the MegaLogViewerHD website, which is *not* the latest. The latest can seemingly only be obtained by doing an in-app update.
I'm now on version v4.4.61 and I can open the log files just fine.
Re: Cant import tune file to (megalogviewer)
Posted: Wed Jun 14, 2023 3:31 pm
by mx5newbie
Gadgethm wrote: ↑Wed May 24, 2023 10:03 pm
I also had this issue where MegaLogViewerHD was reporting that my files were coming in as "Version 2" and that it only supports "Version 1". Turns out, I was running v4.4.43 from the MegaLogViewerHD website, which is *not* the latest. The latest can seemingly only be obtained by doing an in-app update.
I'm now on version v4.4.61 and I can open the log files just fine.
This is good news. I emailed them about this last year and they replied this wasn’t on their priority list. Same reply again earlier this year.
I’m going to try to update to the latest version today.
Re: Cant import tune file to (megalogviewer)
Posted: Thu Jun 15, 2023 2:04 am
by mx5newbie
Gadgethm wrote: ↑Wed May 24, 2023 10:03 pm
I also had this issue where MegaLogViewerHD was reporting that my files were coming in as "Version 2" and that it only supports "Version 1". Turns out, I was running v4.4.43 from the MegaLogViewerHD website, which is *not* the latest. The latest can seemingly only be obtained by doing an in-app update.
I'm now on version v4.4.61 and I can open the log files just fine.
What firmware are you on?
Re: Cant import tune file to (megalogviewer)
Posted: Sat Jun 17, 2023 5:49 pm
by Gadgethm
mx5newbie wrote: ↑Thu Jun 15, 2023 2:04 am
What firmware are you on?
I run a custom branch which I regularly rebase from main due to some harnessing/hardware differences on my Hellen board.